Aigo AK500

Contents

Aigo AK 500W PC Power Supply Unit User Manual

Model: AK500

1. Introduction

The Aigo AK 500W PC Power Supply Unit (PSU) is designed to provide stable and efficient power for desktop computers and servers. Featuring a 120mm quiet fan and multiple protection mechanisms, it ensures reliable performance for gaming and general computing needs. This manual provides essential information for the safe installation, operation, and maintenance of your Aigo AK 500W PSU.

2. Safety Information

  • Electrical Safety: Equipment installation must comply with local and national electrical codes. Always disconnect the power supply from the main power outlet before installation or maintenance.
  • Do Not Open: Do not remove the cover of the power supply under any circumstances. There are no user-serviceable parts inside, and opening the unit voids the warranty and poses a risk of electric shock.
  • Environmental Conditions: This power supply is designed for use below 2000 meters altitude and in non-tropical climates. Ensure proper ventilation around the unit.
  • Liquid and Moisture: Keep the power supply away from water, moisture, and high humidity environments.
  • Ventilation: Ensure that the power supply's fan and ventilation openings are not obstructed to prevent overheating.

3. Package Contents

Please check the package for the following items:

  • 1 x Aigo AK 500W Power Supply Unit
  • 1 x Power Supply Cables Set
  • 1 x Installation Instruction Manual

4. Specifications

Aigo AK500 Power Supply Unit product label showing electrical specifications

Product label with detailed electrical specifications.

Diagram showing exposed cable lengths for various connectors

Diagram of exposed cable lengths.

General Specifications
FeatureDescription
Model NumberAK500
Max Power500W
TypeIntel ATX 12V V2.31
PFC TypePassive
Efficiency80%
Input Voltage200-240Vac
Input Frequency Range50/60Hz
Size (L*W*H)140mm * 150mm * 86mm
Cooling System120mm Hydraulic Bearing Fan (1 Fan)
MTBF>20000 Hrs
Operating Temperature0-45°C
ModularNon-Modular
ApplicationDesktop, Server
CertificationsCE, FCC, RoHS, CB, CCC
Output Interfaces
Connector TypeQuantity
Mainboard (M/B)1 x 20+4Pin
CPU Power1 x 4+4Pin (P4+4)
PCI-E (Graphics Card)2 x 6+2Pin
4Pin (Peripheral/Molex)2
SATA4
DC Output Specifications
RailMax CurrentMax Power
+12V41A492W
+5V15A100W
+3.3V15A100W
-12V0.3A3.6W
+5Vsb2.5A12.5W

5. Installation Guide

Follow these steps to install your Aigo AK 500W Power Supply Unit:

Diagram showing steps for installing a power supply unit and connecting cables to motherboard, hard drive, graphics card, and lighting system.

Visual guide for PSU installation and cable connections.

  1. Prepare the Case: Install the power supply unit at the intended location within your computer case. Use a screwdriver (typically a Phillips head) to secure the power supply in place with the provided screws.
  2. Connect Mainboard Power (20+4PIN): Locate the main power cable (20+4PIN) from the power supply. Connect it to the long, rectangular port on your motherboard.
  3. Connect SATA Devices: Use the smaller SATA power cables to connect the power supply to your hard drives (HDD) and solid-state drives (SSD).
  4. Connect Graphics Card (6+2PIN VGA): If your system includes a dedicated graphics card, connect the 6+2PIN VGA cable from the power supply to the graphics card.
  5. Connect Lighting System (4PIN): If applicable, connect the 4PIN cable from the power supply to your system's lighting components.
  6. Connect CPU Power (4PIN or 8PIN): Connect the 4PIN or 8PIN CPU power connector to the corresponding port on your motherboard. If your motherboard requires an 8-pin connector and your PSU only has a 4-pin, it may still work, but an 8-pin connection is recommended for stability.

6. Operating Instructions

Once the power supply is correctly installed and all components are connected:

  • Power On: Connect the power supply to a wall outlet using the provided power cord. Flip the power switch on the back of the PSU to the 'ON' position.
  • System Start-up: Power on your computer system. The 120mm hydraulic bearing fan will operate quietly to cool the unit.
  • Compatibility: The Aigo AK 500W PSU supports a wide range of Intel and AMD CPUs, making it suitable for various desktop configurations.
  • Protection Features: The PSU is equipped with multiple protection features to safeguard your components from overvoltage, overcurrent, undervoltage, short circuits, and overload.

7. Maintenance

  • Cleaning: Periodically clean the exterior of the power supply and the fan grille to prevent dust buildup, which can impede airflow and lead to overheating. Use compressed air to gently clear dust from the fan and vents.
  • Cable Management: Ensure cables are neatly managed to allow for optimal airflow within the computer case.
  • Environmental Check: Ensure the operating environment remains within the specified temperature and humidity ranges.

8. Troubleshooting

  • No Power: If the computer does not power on, ensure all power cables (20+4PIN motherboard, CPU, GPU, SATA) are securely connected. Check the power switch on the back of the PSU and the wall outlet connection.
  • System Instability/Crashes: Intermittent system crashes or instability can sometimes be related to insufficient or unstable power. Verify that your components (CPU, GPU) do not exceed the PSU's rated power output. Ensure all connections are firm.
  • Fan Noise: While designed for quiet operation, excessive fan noise might indicate dust buildup. Refer to the maintenance section for cleaning instructions. If noise persists, ensure the PSU is securely mounted.
  • Component Compatibility: Ensure your system's components (e.g., graphics card) do not draw more power than the PSU can provide on its respective rails.

9. User Tips

  • Voltage Compatibility: This PSU operates on an input voltage range of 200-240V. Please ensure your regional power supply matches this requirement. It is not compatible with 110V systems without a voltage converter.
  • Graphics Card Power: For demanding graphics cards like the RX590, ensure that the PSU's 500W capacity and dedicated PCI-E connectors (2 x 6+2PIN) are sufficient for the card's power draw, especially when paired with a CPU like the i5 2650_v4. Always check the graphics card manufacturer's recommended PSU wattage.

10. Warranty and Support

The Aigo AK 500W PC Power Supply Unit comes with standard manufacturer certifications including CE, FCC, and RoHS, ensuring compliance with safety and environmental standards.

For detailed warranty information, technical support, or further inquiries, please refer to the official Aigo support channels or the comprehensive user manual available in PDF format:

View User Manual (PDF)

Always retain your proof of purchase for warranty claims.

© 2023 Aigo. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.