1. Introduction
Thank you for choosing the Kankeirr PL.MS6M30K.1 120Hz Universal LCD LED Screen Adapter Board. This board is designed to enhance the display capabilities of various LCD and LED screens, enabling a 120Hz refresh rate. It is compatible with Digital-to-Analog Converters (DAC), professional audio equipment, and general display equipment. This manual provides essential information for the safe and effective use of your adapter board.

Figure 1: Kankeirr PL.MS6M30K.1 120Hz Adapter Board
2. Safety Information
Please read and understand all safety instructions before installation and operation. Failure to follow these instructions may result in electric shock, fire, or damage to the product or connected devices.
- Always disconnect power from all devices before making any connections.
- Handle the adapter board with care to avoid damage to components.
- Ensure proper grounding for all connected equipment.
- Do not expose the device to moisture, extreme temperatures, or direct sunlight.
- Only use compatible power supplies and cables.
- If you are unsure about any installation step, consult a qualified technician.
3. Package Contents
Verify that all items are present in your package:
- 1x Kankeirr PL.MS6M30K.1 120Hz Adapter Board
- 1x 41-pin screen cable
- 1x 51-pin screen cable
- 1x 30-pin to 30-pin screen cable

Figure 2: Adapter Board with Included Cables
4. Setup Instructions
Follow these steps to connect your PL.MS6M30K.1 adapter board:
- Prepare Your Workspace: Ensure all power is disconnected from your display and source device. Work on a clean, static-free surface.
- Identify Connections: Locate the LVDS INPUT, LVDS OUTPUT, and POWER connectors on the PL.MS6M30K.1 board. Refer to Figure 3 for visual guidance.
- Connect LVDS Input: Select the appropriate screen cable (41-pin, 51-pin, or 30-pin to 30-pin) that matches your source device's LVDS output. Connect one end of the cable to the LVDS INPUT on the adapter board.
- Connect LVDS Output: Connect the other end of the selected screen cable to the LVDS input of your LCD/LED screen. Ensure a secure connection.
- Connect Power: Connect a compatible power supply to the POWER input on the adapter board. Ensure the voltage and current specifications match the board's requirements (refer to specifications).
- Verify Connections: Double-check all connections to ensure they are firm and correctly oriented before applying power.

Figure 3: Adapter Board with Cables Connected (Example)

Figure 4: Power Input Area
5. Operating Instructions
Once the adapter board is correctly installed and connected:
- Power On: Apply power to your display and source device. The adapter board should power on automatically.
- Display Detection: Your display should detect the input signal from the adapter board. If not, check your display's input source settings.
- Verify Refresh Rate: Access your display or source device's settings to confirm that the 120Hz refresh rate is active. Adjust settings as needed to achieve the desired refresh rate.
6. Maintenance
The Kankeirr PL.MS6M30K.1 adapter board requires minimal maintenance:
- Keep the board clean and free from dust. Use a soft, dry cloth for cleaning.
- Avoid exposing the board to liquids or corrosive substances.
- Ensure adequate ventilation around the board to prevent overheating.
- Periodically check cable connections for looseness.
7. Troubleshooting
If you encounter issues, try the following solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No display on screen | Loose cable connections, incorrect input source, power issue. | Check all LVDS and power cable connections. Ensure the display is set to the correct input source. Verify power supply is working. |
| Incorrect refresh rate (not 120Hz) | Source device or display settings not configured for 120Hz. | Adjust the refresh rate settings on your source device (e.g., PC graphics card settings) and/or your display. Ensure your display supports 120Hz. |
| Intermittent signal loss | Faulty cable, interference, unstable power. | Try replacing the LVDS cables. Ensure cables are not near strong electromagnetic interference. Use a stable power source. |
| Board not powering on | Power supply issue, incorrect power connection. | Verify the power supply is functional and connected correctly to the board's power input. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | PL.MS6M30K.1 |
| Brand Name | kankeirr |
| Compatible Equipment Style | Digital-to-Analog Converter (DAC), Professional Audio Equipment, Display Equipment |
| Function | 120Hz Adapter Board for LCD/LED Screens |
| Main Chip | MST6M30KUB (as seen in Figure 5) |
| Origin | Mainland China |
| Package Dimensions (approx.) | 15 cm (Length) x 8 cm (Width) x 3 cm (Height) |
| Package Weight (approx.) | 0.15 kg |

Figure 5: MST6M30KUB Main Chip
9. User Tips
- Always ensure your display panel is compatible with 120Hz refresh rates before attempting installation.
- When connecting cables, apply gentle, even pressure to avoid bending pins or damaging connectors.
- If you experience display issues, try restarting both the source device and the display after checking all connections.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.