Cada C51077W

Contents

User Manual

Cada C51077W City RC Racing Car Building Blocks

Introduction

Thank you for choosing the Cada C51077W City RC Racing Car Building Blocks set. This educational toy combines the fun of building with the excitement of remote-controlled racing and app-based programming. Designed for ages 6 and up, this 325-piece set offers a hands-on experience in STEM education, developing logical thinking and practical skills. This manual provides essential information for assembly, operation, maintenance, and troubleshooting to ensure a safe and enjoyable experience.

Safety Warnings

⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

  • Not suitable for children under 3 years due to small parts which may present a choking hazard.
  • Adult supervision is recommended during assembly and play.
  • Do not eat the building blocks.
  • Ensure batteries are inserted with correct polarity. Do not mix old and new batteries, or different types of batteries.
  • Remove batteries from the toy if it is not to be used for an extended period.

Assembly & Setup

Building the Model

The Cada C51077W is designed for a low-difficulty build, making it accessible for young builders. Follow the step-by-step instructions provided in the separate building guide included in your package to assemble the 325 pieces into the racing car model.

Illustration of the Cada C51077W racing car in various stages of assembly with individual building blocks scattered around.
Image: Low difficulty build, showing disassembled car and bricks.

Battery Installation

Batteries are not included and must be purchased separately.

  • Car Battery: Requires 3 x 1.5V 400mAh batteries. Locate the battery compartment on the car, open it, insert the batteries according to the polarity markings, and close the compartment securely.
  • Radio Control Battery: Requires 2 x 1.5V AAA batteries. Locate the battery compartment on the remote control, open it, insert the batteries according to the polarity markings, and close the compartment securely.

App Installation

To utilize the app programming and control features, download the official Cada Smart+ app:

  • Scan the QR code provided in the product information image or search for "Cada Smart+" in your device's app store.
  • System Requirements: iOS 12.0 or above, Android 8.0 or above.
Image showing a smartphone displaying the Cada Smart+ app interface and a QR code for app download.
Image: Dual control options and App download instructions with QR code.

Initial Connection (App)

After installing the app and inserting batteries into the car, ensure your device's Bluetooth is enabled. Open the Cada Smart+ app and follow the on-screen prompts to connect to your C51077W racing car via Bluetooth.

Operating Instructions

The Cada C51077W offers dual control options: a physical 2.4GHz remote control and a feature-rich mobile app.

Image illustrating the dual control options: a smartphone running the Cada app and a physical 2.4GHz remote control, both controlling the blue racing car.
Image: Dual control explanation (App and 2.4GHz remote).

Remote Control Operation

The included 2.4GHz remote control provides interference-free operation with a control range of approximately 25 meters.

Diagram of the white 2.4GHz remote control showing an indicator light, power switch, and two joysticks labeled 'Driving' and 'Steering'.
Image: Remote control instructions with indicator light, power switch, driving, and steering controls.
  • Power Switch: Turn on the remote control using the power switch. The indicator light will illuminate.
  • Driving: Use the left joystick to control the car's forward and backward movement.
  • Steering: Use the right joystick to control the car's left and right steering.

App Control Modes

The Cada Smart+ app offers four distinct control interfaces for enhanced interaction and guided learning:

Screenshot of the Cada Smart+ app showing four icons for different operation modes: Remote control mode, Scratch programming mode, Gyroscope control, and Path mode.
Image: App multimode operations, choose from multiple control interfaces.

1. Remote Control Mode (App)

This mode mimics a traditional remote control interface on your smartphone screen, allowing you to drive and steer the car using virtual joysticks.

2. Scratch Programming Mode

Learn basic programming skills with a horizontal drag-and-drop system. Combine command modules and set time spans for each action to create custom movement sequences.

Screenshot of the Scratch programming interface showing conditional module drag combination and how to preset each module's time span.
Image: Scratch programming mode interface showing conditional module drag combination and preset time span.
Detailed view of the Scratch programming interface with various command modules like Start, Infinite loop, Number of cycles, Stop, Pause, Turn left, Forward, Turn right, along with Return key, Command module combination, Save, and Run options.
Image: Scratch programming details showing various command modules.

3. Gyroscope Control

Control the car's path by tilting your smartphone. The gravity sensor allows for intuitive steering and movement, including S-shaped routes and turning around.

Screenshot of the Gyroscope operations interface showing controls for Driving, Go Round, Steering, along with options for Return key, S-shaped route, Speed, Go straight and turn around, and Bluetooth connectivity.
Image: Gyroscope operations interface with various control options.

4. Path Mode

Draw a path on your smartphone screen, and the car will follow the programmed route. This mode allows for creative route planning and execution.

Screenshot of the Path mode interface showing a finger drawing a path line on a starry background, with options for Return key, Path line, Start, and Bluetooth connectivity.
Image: Path mode interface for planning and editing routes.
Illustration of two blue racing cars on a light blue background, with a dashed line indicating a path from a 'Start' point to an 'End' point, demonstrating the Path mode.
Image: Path mode example showing a car following a programmed route.

Maintenance

  • Cleaning: Wipe the building blocks and car with a dry, soft cloth. Avoid using water or chemical cleaners, as this may damage the electronic components or the plastic.
  • Storage: Store the building blocks and car in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care: Remove batteries from the car and remote control if not in use for extended periods to prevent leakage and damage.

Troubleshooting

  • Missing Pieces: If you find any pieces missing during assembly, please refer to the parts list in your building guide and contact customer support for assistance.
  • Car Not Responding:
    • Check if the car and remote control batteries are correctly installed and fully charged.
    • Ensure the car and remote control are powered on.
    • Verify that the app is correctly connected via Bluetooth if using app control.
    • Make sure the car is within the 25-meter control range of the remote.
  • App Connection Issues:
    • Ensure your smartphone meets the minimum OS requirements (iOS 12.0+, Android 8.0+).
    • Restart the app and your device's Bluetooth.
    • Try restarting the car and remote control.

Specifications

Product information table for the Cada C51077W Blue Knight, detailing product name, serial number, age, pieces, battery types, vehicle size, package dimensions, radio control range, and vehicle speed.
Image: Product information table.
FeatureDetail
Product NameBlue Knight
Product Serial NumberC51077W
Ages6+
Pieces325PCS
Car Battery3 x 1.5V 400mAh (Not included)
Radio Control Battery2 x 1.5V AAA (Not included)
Vehicle Size20.9 x 10.4 x 5.8 cm
Package Dimensions35 x 6 x 24 cm
Radio Control Range~25 meters
Vehicle Speed≥3.8 km/h
MaterialPlastic
CertificationCE
Block SizeSmall building block (Compatible with Lego)
Electric FunctionalityYes, Remote Control (Batteries not included)

User Tips

  • Start with the Build: Take your time and enjoy the building process. It's a key part of the STEM learning experience.
  • Explore App Modes: Don't just stick to remote control. Experiment with the Scratch programming, Gyroscope, and Path modes to unlock the full educational potential and fun of the car.
  • Battery Management: Always have spare batteries on hand for uninterrupted play, as they are not included in the package.
  • Creative Programming: Challenge yourself to create complex movement sequences using the Scratch programming mode.

Warranty & Support

For any questions, concerns, or support needs regarding your Cada C51077W City RC Racing Car Building Blocks, please refer to the contact information provided with your purchase or visit the official Cada website for customer service details. Please retain your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.