HONEST BCZ753

Contents

HONEST BCZ753 Jet Flame Butane Torch Lighter User Manual

Model: BCZ753

1. Introduction

Thank you for choosing the HONEST BCZ753 Jet Flame Butane Torch Lighter. This manual provides essential information for the safe and effective use, maintenance, and care of your new lighter. Please read it thoroughly before first use and keep it for future reference.

HONEST Jet Flame Lighters in Red, Gold, Silver, and Black

Figure 1: HONEST Jet Flame Lighters in various colors.

2. Key Features

  • High Quality Construction: Sturdy metal body with a fuel level window.
  • Butane Refillable: Designed for easy butane refilling with an adjustable flame.
  • Strong Jet Flame: Features a super powerful single torch jet flame with a large flame base, suitable for various lighting needs.
  • Windproof Design: Ensures reliable ignition even in windy conditions.
  • Portable: Compact size for easy carrying.
Detailed view of the HONEST Jet Flame Lighter, highlighting key components like the strong blue flame, cooling hole design, push-up ignition, fuel visible window, and flame adjust valve.

Figure 2: Lighter components including Strong Blue Flame, Cooling Hole Design, Push Up Ignition, Fuel Visible Window, and Flame Adjust Valve.

3. Specifications

AttributeValue
Model NumberBCZ753
MaterialMetal
OriginMainland China
StyleWindproof
UsageCigar, Cigarette, General Lighting
Fuel TypeButane (Refillable)
Flame Type1 Torch Jet Flame
Weight58.1g
Size154*21*20mm

4. Setup

4.1 Initial Fueling

Your lighter does NOT come filled with butane due to shipping regulations. You will need to purchase butane gas separately. Use only 4MPa pressure butane gas for refilling.

  1. Turn the lighter upside down.
  2. Insert the gas canister tip into the refill valve at the bottom of the lighter.
  3. Push down firmly to fill. Hold for a few seconds. Repeat 2-3 times for a full fill.
  4. After refilling, wait for 5-10 minutes to allow the gas to stabilize in the lighter before attempting to use it.
Step-by-step guide for refilling the HONEST Jet Flame Lighter with butane gas.

Figure 3: Butane refilling process. Turn lighter upside down, insert canister tip, and push to fill.

5. Operating Instructions

5.1 Ignition

To ignite the lighter, simply push up the ignition switch located on the side of the lighter. The jet flame will appear instantly.

5.2 Flame Adjustment

The flame height can be adjusted using the flame adjust valve located at the bottom of the lighter. Use a small flat-head screwdriver or a similar tool (like a car key) to turn the valve:

  • Turn towards the '+' sign for a larger, stronger flame.
  • Turn towards the '-' sign for a smaller, weaker flame.
Instructions for adjusting the flame height on the HONEST Jet Flame Lighter using the flame adjust valve.

Figure 4: Flame adjustment valve and visual representation of flame sizes.

5.3 Fuel Level Check

Monitor the butane level through the transparent fuel visible window on the side of the lighter to know when a refill is needed.

5.4 Product Demonstration Video

Video 1: Demonstration of the HONEST Jet Flame Lighter's features, including lighting cigars, candles, mosquito coils, burning a can, and adjusting the flame.

6. Maintenance

6.1 Refilling

Refer to Section 4.1 for detailed instructions on refilling your lighter. Regular refilling with high-quality butane ensures optimal performance and longevity.

6.2 Cleaning

Keep the lighter's exterior clean with a soft, dry cloth. Ensure the burner nozzle is free from debris to maintain a consistent flame. Avoid using harsh chemicals or abrasive materials that could damage the finish.

Close-up views of the HONEST Jet Flame Lighter's high-temperature resistant burner, cooling vents, and bottom refill valve.

Figure 5: Detailed views of the lighter's burner and cooling vents, important for maintenance.

7. Troubleshooting

If you encounter issues with your lighter, please refer to the following common problems and solutions:

ProblemPossible CauseSolution
Lighter does not ignite or has a weak flame.Low or no butane fuel. Incorrect flame adjustment. Air in the fuel tank.Check fuel window and refill if necessary (see Section 4.1). Adjust flame to a higher setting (see Section 5.2). Purge any residual air by pressing the refill valve with a small tool before refilling.
Flame is inconsistent or sputters.Low fuel. Impurities in butane. Burner nozzle blocked.Refill with high-quality butane. Ensure the burner nozzle is clear of debris.
Lighter leaks butane during or after refilling.Improper refilling technique. Damaged refill valve.Ensure the gas canister tip is properly aligned and pressed firmly during refilling. If leaking persists, the valve may be damaged; contact support.

8. User Tips

  • Always use high-quality butane fuel for optimal performance and to prevent clogging of the burner.
  • After refilling, always allow 5-10 minutes for the butane gas to stabilize and reach room temperature before attempting to ignite the lighter. This helps ensure a consistent flame.
  • When adjusting the flame, make small increments and test the flame after each adjustment to find your preferred setting.
  • Store your lighter in a cool, dry place away from direct sunlight and extreme temperatures.

9. Warranty and Support

No specific warranty information is provided with this product. For any issues, questions, or support needs, please contact the seller or retailer from whom you purchased the product. They will be able to assist you with product-specific inquiries and potential resolutions.

10. Safety Warnings

  • Keep out of reach of children.
  • Ignite lighter away from face and clothing.
  • Do not puncture or incinerate.
  • Do not expose to temperatures above 120°F (49°C).
  • Never attempt to disassemble or modify the lighter.
  • Ensure the flame is extinguished after each use.
  • Use only high-quality butane fuel.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.