Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your AMPrime Android 13 IPS Screen Car Radio. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize your user experience. This car multimedia player offers advanced features including Android 13 OS, IPS touch screen, GPS navigation, wireless CarPlay and Android Auto, Wi-Fi connectivity, and a powerful audio processor.
Safety Information
- Always ensure the vehicle is turned off and the battery is disconnected before performing any installation or wiring.
- Incorrect wiring can cause damage to the device or your vehicle's electrical system. If unsure, consult a professional installer.
- Do not operate the device in a way that distracts you from driving. Always prioritize road safety.
- Avoid exposing the device to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
- Use only approved accessories and cables with the device.
Package Contents
Please check the package for the following items:
- 1 x Car Player (7'', 9'', or 10'' IPS touch screen model)
- 1 x Power Cable
- 1 x GPS Antenna
- 1 x Rear Camera Input Cable
- 1 x RCA Cable
- 2 x USB Cable
- 2 x Mounting Bracket
- 4 x Screw
- 1 x Instruction manual
Product Overview
Physical Dimensions
The AMPrime car radio is available in 7-inch, 9-inch, and 10-inch IPS touch screen variants. Below are the typical dimensions:
- 10-inch Model: 242mm (width) x 147mm (height) x 71mm (depth)
- 9-inch Model: 228mm (width) x 130mm (height) x 71mm (depth)
- 7-inch Model: 178mm (width) x 102mm (height) x 70mm (depth)
Controls and Ports
The device features a user-friendly interface with physical buttons on the left side for quick access to essential functions:
- MIC: Built-in microphone for voice commands and calls.
- RST (Reset): Small button to reset the device (may require a pin).
- Power: On/Off button.
- Home: Returns to the main home screen.
- Back: Navigates back in menus or applications.
- Vol+: Increases volume.
- Vol-: Decreases volume.
The rear of the unit provides various connection ports:
- Power Cable: Main power and speaker connections.
- RCA Input/Output: For external audio/video devices.
- Reversing Camera Input: Dedicated input for a rear view camera.
- USB Cable: Two USB interfaces for media playback and device charging.
- GPS Antenna: Connects to the external GPS antenna for navigation.
- Radio Antenna: Connects to the vehicle's FM/AM antenna.
Setup
Installation
- Disconnect Battery: Before starting, disconnect the negative terminal of your vehicle's battery to prevent electrical shorts.
- Remove Old Head Unit: Carefully remove your existing car radio. This may require special tools depending on your vehicle model.
- Mounting: Use the provided mounting brackets and screws to secure the AMPrime car radio into the double-DIN slot of your vehicle's dashboard. Ensure it is firmly in place.
- Connect Wiring: Refer to the 'Connection Reference' diagram (Figure 6) and your vehicle's wiring diagram. Connect the Power Cable, RCA cables, Rear Camera Input Cable (if applicable), USB cables, GPS antenna, and Radio antenna to their respective ports on the car player.
- Test Connections: Before fully reassembling the dashboard, reconnect the vehicle battery and briefly turn on the ignition to test basic functions like power, audio, and display.
- Final Assembly: If all tests are successful, carefully reassemble your vehicle's dashboard.
Initial Power-On
After installation, press the Power button to turn on the device. The system will boot up to the Android 13 interface. Follow any on-screen prompts for initial setup, such as language selection and time zone.
Operating Instructions
User Interface (UI)
The AMPrime car radio runs on Android 13, offering a fast and smooth user experience. You can personalize your device's appearance with 59 UI desktop themes and 19 wallpaper options.
Wireless CarPlay and Android Auto
Connect your iPhone or Android phone wirelessly or via USB cable to access CarPlay or Android Auto. This allows you to use your phone's apps for navigation, music, calls, and messages directly on the car radio's screen, controlled by voice or touch.
Built-in WiFi
Connect to the internet via a Wi-Fi hotspot (e.g., from your smartphone) or tethering. This enables web browsing, online content streaming, and app downloads directly on the device.
Bluetooth
Pair your smartphone or other Bluetooth-enabled devices for hands-free calling, music streaming, and automatic loading of your phone book.
GPS Navigation
The built-in GPS module supports online and offline maps. You can download offline maps or purchase navigation apps directly from the Google Play Store for accurate guidance and real-time traffic information.
FM/RDS Radio & Network Radio
Enjoy clear reception of FM radio stations with RDS support. The device also supports Network Radio, allowing you to listen to mainstream radio stations from over 20 countries and regions globally, provided you have an internet connection.
Split Screen Function
Utilize the split-screen feature to run two applications simultaneously. You can customize the size and position of each app and switch between them with a simple swipe gesture.
Digital Sound Processor (DSP)
The built-in 36-band DSP allows for precise audio tuning, reducing noise and distortion. Adjust the frequency, AE, and 10-band equalization to optimize your sound experience.
Steering Wheel Control (SWC)
The device supports steering wheel controls. You can program the buttons on your steering wheel to control various functions of the car radio, such as volume, track skipping, and mode selection. Access the SWC learning function in the settings menu to map your buttons.
Rear View Camera Support
Connect a compatible AHD or CVBS rear view camera to the dedicated input. The display will automatically switch to the camera view when you engage reverse gear, aiding in safe parking and maneuvering.
USB Ports
The two USB interfaces allow you to connect USB flash drives or hard disks for playing music, videos, and viewing photos. They can also be used to charge compatible devices.
Optional Features
- Intelligent Voice Assistant: Control the device and access functions using natural language voice commands.
- Global Weather Display: Real-time weather information for global cities, including temperature (Celsius/Fahrenheit), humidity, and wind conditions, available with an internet connection.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the screen and exterior of the device. For stubborn smudges, a slightly damp cloth with a mild, non-abrasive cleaner can be used, but avoid spraying liquids directly onto the unit.
- Software Updates: Periodically check for system updates through the device's settings menu (requires internet connection) to ensure optimal performance and access to new features.
- Avoid Obstruction: Ensure that the ventilation openings (if any) are not blocked to prevent overheating.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on | Incorrect wiring; Blown fuse; Vehicle battery issue | Check power cable connections. Verify vehicle fuse and device fuse. Ensure vehicle battery is charged. |
| No sound output | Speaker wiring incorrect; Volume too low; Mute function active | Check speaker wire connections. Increase volume. Disable mute. |
| GPS not acquiring signal | GPS antenna not connected or poorly placed; Obstruction | Ensure GPS antenna is securely connected and placed in an unobstructed location (e.g., dashboard). |
| Touch screen unresponsive | System freeze; Software issue | Perform a soft reset using the RST button. If issue persists, contact support. |
| Bluetooth connection issues | Device not in pairing mode; Interference; Incorrect pairing process | Ensure both devices are in pairing mode. Delete previous pairings and try again. Move closer to the device. |
| CarPlay/Android Auto not connecting | Incorrect USB cable; Phone settings; App issues | Use a high-quality USB data cable. Check phone settings for CarPlay/Android Auto. Ensure apps are updated. |
User Tips
- Wiring Check: Many issues, especially with power or sound, can be traced back to incorrect or loose wiring. Double-check all connections during installation.
- Software Updates: Regularly check for and install system updates to ensure optimal performance and compatibility with new apps and features.
- Offline Maps: For reliable navigation, especially in areas with poor cellular reception, download offline maps for your region.
- Factory Reset Keyword: The factory setting keyword is '1234'. Keep this in mind if you ever need to perform a factory reset.
Specifications
| Feature | Specification |
|---|---|
| System | Android 13 |
| Screen Size | 7''/9''/10'' IPS Touch Screen |
| Memory | 4GB RAM + 64GB ROM |
| Screen Resolution | 1024*600 |
| Radio Chip | 8035 |
| Power Output | 4*45W |
| Bluetooth Version | 5.0 |
| Work Temperature | -20℃ to 75℃ |
| Steering Wheel Control | Support |
| Power Amplifier Chip | YD7388 |
| Radio Band | FM/RDS (Preset Station: 87.5MHz - 108MHz) |
| Video Output | Support |
| Reversing Input | AHD/CVBS |
| External Microphone | Support |
| Split Screen | Support |
| Maps | Built-in offline maps (requires internet to download data) |
| WIFI | Support |
| USB Interface | Double USB interface |
| Audio Formats | APE/FLAC/WAV/MP3/WMA etc. |
| Video Formats | MKV/RMVB/AVI/MP4/MDV etc. |
| Picture Formats | PNG/JPEG/JPG/GIF/WBMP/BNP etc. |
| Factory Setting Keyword | 1234 |
| OSD Language | Multi-language support (Chinese, English, French, Italian, Korean, Japanese, Arabic, Spanish, Portuguese, Russian, Turkish, Vietnamese, Hebrew, Polish, German, etc.) |
| Item Weight | 1.3kg |
| Din Type | Double Din |
| Voltage | 12 V |
| Material | Metal + Plastic |
| Certification | CE, None |
Warranty and Support
The AMPrime Android 13 IPS Screen Car Radio comes with a One-Year Warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.
For technical support, troubleshooting assistance, or warranty inquiries, please contact the AMPrime Official Store directly through the platform where you made your purchase. Provide your product model and a detailed description of the issue to receive prompt assistance.