Herdio HMS-401WBT

Contents

Herdio 4 Inch Outdoor Bluetooth Speakers User Manual

Model: HMS-401WBT

1. Introduction

Thank you for choosing Herdio 4 Inch Outdoor Bluetooth Speakers. These speakers are designed to provide high-quality audio for various environments, including patios, decks, garages, basements, or living rooms. Featuring advanced Bluetooth 4.0 technology, a durable marine-grade waterproof construction, and versatile swivel brackets, these speakers offer a robust and flexible audio solution.

2. Package Contents

Please check the box for the following items:

  • 2 x Herdio 4 Inch Speakers (1 Active, 1 Passive)
  • 2 x Mount Brackets
  • 1 x 12VDC Power Cable (6.5 Feet / 2 meters)
  • 1 x Speaker Wire (16 Feet / 5 meters)
  • 1 x Owner’s Manual
Image showing all items included in the Herdio speaker package: two white speakers, two mounting brackets, a power adapter, a DC 12V power cable, a speaker cable, and an owner's manual.
Figure 2.1: Package Contents

3. Specifications

FeatureSpecification
Model NameHMS-401WBT
Speaker Type2-Way Full Range Stereo Coaxial Speakers with 1 PEI Dome Tweeter
Woofer Size4 inches
Power Output (Peak)200 Watts
Power Output (RMS)100 Watts
Bluetooth Version4.0
Audio Sensitivity80dB
Frequency Response70Hz - 20kHz
Impedance4 Ohm
Voltage12 V
Waterproof GradeIP66 (Marine Grade)
MaterialABS Plastic (Heavy Duty Engineered Plastic Cabinet)
ColorWhite
Product Dimensions (H x W x D)8.62" (21.9cm) x 6.62" (15.9cm) x 5.67" (14.4cm)
Item Weight (Pair)6.6 lbs (approx. 3 kg)
Diagram showing the dimensions of the Herdio 4 inch speaker: Height 8.62in/21.9cm, Width 6.62in/15.9cm, Depth 5.67in/14.4cm.
Figure 3.1: Speaker Dimensions
Image showing water droplets on the speaker grille, with icons indicating Waterproof, Anti-UV, and Resists Corrosion, highlighting the all-weather resistant coating.
Figure 3.2: All Weather Resistant Coating

4. Setup

4.1. Unboxing

Carefully remove all components from the packaging. Ensure all items listed in the Package Contents section are present and undamaged.

4.2. Wiring and Bluetooth Pairing

Follow these steps to connect your speakers and pair them via Bluetooth:

  1. Connect Speaker Cable to Active Speaker: Use the provided speaker cable (red for positive +, black for negative -) to connect to the corresponding terminals on the back of the active speaker.
  2. Connect Speaker Cable to Passive Speaker: Link the other end of the speaker cable to the terminals on the passive speaker, ensuring correct polarity (red to red, black to black).
  3. Plug in Power Supply: Connect the DC 12V power cable to the active speaker and then plug the power adapter into a suitable power outlet. The active speaker's blue light will blink, indicating it is in pairing mode. A constant blue light means it is connected.
  4. Pair Bluetooth & Play Music: On your mobile device, search for available Bluetooth devices and select the Herdio speaker. Once connected, you can start playing music.
Rear view of active and passive speakers showing input terminals. The active speaker has a power input jack and speaker terminals, while the passive speaker only has speaker terminals.
Figure 4.1: Active and Passive Speaker Connections
Image depicting a hand holding a smartphone, with a Bluetooth signal icon connecting to a Herdio speaker, illustrating the advanced Bluetooth 4.0 technology.
Figure 4.2: Bluetooth Connection
Video 4.1: Unboxing, Wiring, Bluetooth Pairing, and Installation Guide

4.3. Speaker Installation

The speakers come with versatile swivel brackets for easy mounting:

  1. Remove the Bracket: Turn the knob on the side of the speaker to remove the mounting bracket.
  2. Fix the Bracket: Securely fix the bracket to your desired surface (wall, ceiling, etc.) using appropriate nails or screws.
  3. Attach the Speaker: Place the speaker onto the fixed bracket and tighten it with the knob.
  4. Adjust Speaker Angle: Loosen the knobs slightly to rotate the speaker for optimal sound direction, then tighten to secure. The brackets allow for up to 90-120 degrees of motion.
Image showing the swivel bracket mechanism on the side of the speaker, indicating a 90-120 degree range of motion for flexible positioning.
Figure 4.3: Versatile Swivel Brackets

5. Operating Instructions

Once the speakers are installed and powered on, and your device is paired via Bluetooth, you can control the audio playback directly from your connected device. Adjust volume, skip tracks, and manage playlists using your smartphone, tablet, or other Bluetooth-enabled audio source.

6. Maintenance

To ensure the longevity and optimal performance of your Herdio speakers, follow these maintenance guidelines:

  • Cleaning: Use a soft, damp cloth to clean the speaker cabinets and grilles. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish or components.
  • Weather Resistance: While the speakers feature marine-grade IP66 waterproof construction, it is recommended to place them in areas with some protection from extreme weather conditions when possible to extend their lifespan. Ensure all connections are secure to maintain water resistance.
  • Cable Inspection: Periodically check all cables for any signs of wear, fraying, or damage. Replace damaged cables immediately to prevent electrical hazards or performance issues.

7. Troubleshooting

  • No Sound:
    • Ensure the power adapter is securely plugged into the active speaker and a working power outlet.
    • Verify that the speaker cable connecting the active and passive speakers is correctly and securely attached, observing polarity.
    • Check the volume level on your connected Bluetooth device and ensure it is not muted.
    • Confirm that the Bluetooth connection is active and the active speaker's blue light is solid (not blinking).
  • Bluetooth Not Connecting:
    • Make sure the active speaker is powered on and its blue light is blinking, indicating pairing mode.
    • Ensure your device's Bluetooth is enabled and it is within range (up to 60ft).
    • Forget the speaker from your device's Bluetooth list and try pairing again.
    • If multiple devices are nearby, ensure you are selecting the correct Herdio speaker.
  • Distorted Audio:
    • Reduce the volume on your connected device or the speaker to see if the distortion clears.
    • Ensure your audio source is playing high-quality audio files.
    • Check for any interference from other electronic devices.
    • Verify that the speaker cable connections are tight and correct.

8. User Tips

  • For optimal sound performance, experiment with different speaker placements and angles using the swivel brackets.
  • Always ensure the speakers are powered by the included 12V5A power adapter to prevent damage and ensure proper functionality.
  • These speakers are compatible with a wide range of Bluetooth devices, including iPhones, Android phones, tablets, iPads, and PCs.
  • The robust construction makes them suitable for various outdoor settings, but consider placing them under an overhang or in a sheltered spot for maximum protection from prolonged direct exposure to harsh elements.

9. Warranty and Support

Herdio warrants this device against defects in materials and workmanship under ordinary consumer use for one year from the date of receiving goods. This limited warranty applies only to hardware components of the products that are not subject to accident, misuse, neglect, fire or other external causes, unauthorized use, alterations or repair, or commercial use.

For support or warranty claims, please refer to the contact information provided with your purchase or visit the Herdio website.

© 2024 Herdio. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.