Introduction
This instruction manual provides essential information for the installation, operation, and maintenance of the Flytec Official Original Circuit Board Set and GPS Module spare parts. These components are designed for use with Flytec GPS RC Fishing Bait Boats models V010, V020, V070, and V900, ensuring optimal performance and functionality of your bait boat.
Specifications
General Product Attributes
| Attribute | Value |
|---|---|
| Brand Name | Flytec |
| Model Numbers | V010-09, V020-09, V070-01, V900-01, V900-02, V900-03 |
| For Vehicle Type | Boats |
| Material | Composite Material |
| RC Parts & Accs | Receivers |
| Remote Control Peripherals/Devices | Receivers |
| Tool Supplies | Sticker |
| Use | Vehicles & Remote Control Toys |
| Is Electric | No Battery |
| Is Batteries Included | No |
| Quantity | 2 (referring to the set of boards) |
| Recommend Age | 14+y |
| Certification | CE |
| Origin | Mainland China |
Component Dimensions and Weight
- V900 Board Set (Remote Control Circuit Board Assembly): Net Weight: 70.9g, Size: 13.1*11*2.1cm (Circuit Board), 5.7*3.5*0.7cm (Display Screen)
- V900-01 Boat Circuit Board: Net Weight: 27.5g, Size: 7x7.5x1cm
- V010-09 Boat Circuit Board: Net Weight: 21.8g, Size: 6.7*5.6*1.5cm
- V020-09 Boat Circuit Board: Net Weight: 21.7g, Size: 6.7*5.6*1.5cm
- V070-01 Boat Circuit Board: Net Weight: 30g, Size: 6.9*7.4*1.3cm
- GPS Module (V900-02): Net Weight: 13g, Size: 2.4*2.1*0.7cm
Setup and Installation
Careful installation is crucial for the proper functioning of your bait boat. Always ensure the boat is powered off and disconnected from any power source before handling circuit boards.
Component Overview and Connection Points
Below are diagrams illustrating the various circuit boards and their connection points. Please refer to the specific diagram for your boat model (V010, V020, V070, V900) when installing or replacing components.
Figure 1: V010 Boat Circuit Board. Key connection points include Front Light, Right Rear Light, Battery Indicator, Servo, Switch, Battery, Right Motor, Left Motor, Right Silo, Left Silo, GPS Module, PPM, +5V, GND, and ANT (Antenna).
Figure 2: V020 Boat Circuit Board. Similar to V010, this board features connections for Front Light, Right Front Light, Right Rear Light, Battery Indicator, Servo, Switch, Battery, Right Motor, Left Motor, Right Silo, Left Silo, GPS Module, PPM, +5V, GND, and ANT (Antenna).
Other board sets (V070, V900) and the GPS module are shown below for identification:
V010 Circuit Board Set
V020 Circuit Board Set
V070 Circuit Board Set
V900 Circuit Board Set
GPS Module
Remote Control and Boat Pairing Instructions
After replacing any circuit board components, the remote control and the boat's receiving board must be paired to establish communication. Follow these steps:
- Place the boat in a horizontal position.
- Connect the boat battery and install the remote battery.
- Frequency Matching: Press and hold the "pairing" button (1) on the remote control without releasing it. Then, turn on the boat. Next, turn on the switch on the remote control (2). When the remote control makes a "beep" sound, the green indicator light will turn on, indicating that the remote control and the boat have been connected.
- Calibration: Press the "down" button (3), and the boat light will start flashing. Once the boat light stops flashing, the boat is ready to use.
Figure 3: Remote Control Pairing Diagram. Illustrates the buttons for pairing and calibration.
Operating Features
The Flytec GPS RC Fishing Bait Boats, when equipped with these components, offer a range of advanced operating features:
- Enhanced Signal: Features a 2.4GHz High Gain Enhanced Antenna for a more stable signal.
- Portability: Designed with a convenient handle for easy carrying to and from fishing locations.
- Flexible Power: A large space battery compartment can accommodate batteries of different capacities (e.g., 5200mAh, 12000mAh, 18000mAh).
- Bait Capacity: Dual large hoppers support loading up to 1.5kg of bait.
- Hook Management: Double hook buckle design allows for easily taking the hook and line to the desired drop point.
- Powerful Propulsion: Equipped with a powerful dual-motor system.
- One-click Baiting: Dual hoppers support independent control for precise bait release.
- Extended Range: 2.4GHz control frequency provides a great range of up to 500 meters with a stable connection.
- Automated Driving: One-click auto driving allows the boat to sail in a straight line at a constant speed, freeing your hands.
- Auto Cruise: One-click auto cruise enables the boat to navigate between fixed points.
- Anchor Points: Supports storage of up to 40 anchor points for repeated use at preferred fishing spots.
- Night Operation: Equipped with a lure searchlight for visibility in low-light conditions.
- Steering Indicators: Double-sided steering indicator lights help easily identify the boat's direction.
- GPS Return: Built-in GPS Global Positioning System features a one-click automatic return function.
Video: Flytec V070 Dual Hoppers GPS RC Carp Bait Boat Demonstration. This video showcases the features and operation of a Flytec bait boat, including antenna installation, battery compartment, bait loading, dual motors, bait release, control range, auto-driving, auto-cruise, anchor points, searchlight, steering lights, and automatic return.
Maintenance
To ensure the longevity and optimal performance of your circuit boards and GPS module, follow these maintenance guidelines:
- Keep Dry: Always ensure electronic components are kept dry. Moisture can cause short circuits and damage.
- Cleanliness: Regularly inspect and gently clean the circuit boards and connectors to remove any dirt, dust, or debris. Use a soft, dry brush or compressed air.
- Avoid Static: When handling circuit boards, take precautions to avoid static discharge, which can damage sensitive electronic components.
- Secure Connections: Periodically check all wire connections to ensure they are secure and free from corrosion.
- Proper Storage: Store spare parts in a dry, cool environment, away from direct sunlight and extreme temperatures.
Troubleshooting
If you encounter issues with your Flytec bait boat after installing new circuit board components, consider the following troubleshooting steps:
- No Power to Boat/Remote:
- Ensure batteries are fully charged and correctly installed in both the boat and the remote control.
- Check all power connections on the circuit board for secure fitment.
- Remote Control Not Connecting/Pairing:
- Re-attempt the pairing procedure as described in the "Setup and Installation" section.
- Ensure both the boat and remote control are powered on during the pairing process.
- Verify that the antenna on the remote control and boat is securely attached.
- Limited Control Range:
- Check the antenna connection on both the boat's receiving board and the remote control's transmitting board. A loose or damaged antenna can significantly reduce range.
- Ensure there are no major obstructions between the remote control and the boat.
- Boat Not Responding Correctly:
- Perform the calibration step after successful pairing.
- Inspect all motor, servo, and light connections on the boat circuit board.
User Tips
- Check Connectors: Before final assembly, always double-check that all cables and connectors are properly seated and secured on the circuit boards. Loose connections are a common cause of operational issues.
- Battery Compatibility: While the battery compartment is large, ensure the voltage and connector type of your battery are compatible with the circuit board to prevent damage.
- Environmental Awareness: Be mindful of the environment when operating your bait boat. Avoid areas with excessive aquatic vegetation or debris that could interfere with the propellers or signal.
Warranty and Support
For any questions, technical assistance, or warranty claims regarding your Flytec circuit board set or GPS module, please contact the official Flytec support or your original seller. Keep your purchase receipt as proof of purchase.
