1. Introduction
Thank you for choosing the WB Aquarium Light. This submersible LED light is designed to enhance the aesthetic appeal of your fish tank while providing essential illumination for your aquatic environment. Featuring high-brightness 2835 LEDs and an IP68 waterproof rating, it offers reliable performance and versatility. Please read this manual carefully before installation and use to ensure proper operation and longevity of your product.
2. Safety Information
- Voltage Compatibility: This product operates on AC 220V-240V (50-60Hz). It is NOT suitable for 110-120V countries or regions, such as the United States, Canada, Japan, or Mexico. Using the incorrect voltage may cause damage to the product and pose a safety risk.
- Waterproof Rating: The light is fully submersible with an IP68 waterproof rating and a 3-layer seal design. Ensure all connections are secure before submerging.
- Physical Protection: The light features rubber protective covers on both ends to prevent collision and damage.
- Handling: Always unplug the light from the power source before performing any maintenance or adjustments.
3. Product Features
- High Brightness LEDs: Equipped with efficient 2835 SMD LEDs for vibrant illumination.
- Fully Submersible: IP68 waterproof rating allows for safe underwater placement.
- Durable Design: Features a robust seal design and 3-layer protection for long-lasting use.
- Color Options: Available in Blue+White light or Multicolor (RGB) light to suit different aquatic setups.
- Easy Installation: Comes with removable and strong rubber suction cups for secure mounting.
Image: High Brightness 2835 LEDs and IP68 Waterproof Design
4. Specifications
| Length (CM/inch) | LED Quantity | Power (W) | Voltage | Frequency | Ambient Temperature |
|---|---|---|---|---|---|
| 14.5CM / 5.7inch | 8 LEDs | 3W | AC220-240V | 50/60Hz | 0°C-45°C |
| 28 CM / 11.02inch | 16 LEDs | 5W | AC220-240V | 50/60Hz | 0°C-45°C |
| 38 CM / 14.96inch | 24 LEDs | 7W | AC220-240V | 50/60Hz | 0°C-45°C |
| 48 CM / 18.9inch | 32 LEDs | 9W | AC220-240V | 50/60Hz | 0°C-45°C |
| 58 CM / 22.83inch | 38 LEDs | 11W | AC220-240V | 50/60Hz | 0°C-45°C |
Image: Detailed specifications for various light lengths.
5. Package Contents
Your package should contain the following items:
- 1 x WB Aquarium Light (selected length and color)
- 1 x Power Adapter (with EU plug adapter if original is China Plug)
- 2 x Rubber Suction Cups
6. Setup Instructions
- Attach Suction Cups: Securely attach the provided rubber suction cups to the ends of the aquarium light bar.
- Position the Light: Decide whether you want to place the light inside the tank (fully submersible) or outside/above the water. The strong suction cups allow for flexible placement on the tank glass.
- Connect Power Adapter: Connect the power cable from the light to the power adapter. Ensure the connection is firm. If your original plug is a China Plug, use the provided EU plug adapter.
- Power On: Plug the power adapter into a suitable AC 220V-240V (50-60Hz) electrical outlet.
Image: Connecting the power adapter.
Image: Removable and stronger rubber suction cups.
7. Operating Instructions
Once properly installed and connected to power, the light will turn on. Depending on your model, you will observe either Blue+White light or Multicolor (RGB) light.
Video: Demonstration of the aquarium light, showing power connection and switching between Blue White Light and Multicolor Light modes.
Image: Comparison of Blue White Light and Multicolor Light options.
8. Maintenance
- Cleaning: Regularly clean the light bar to prevent algae buildup and maintain optimal light output. Use a soft cloth and fresh water. Do not use abrasive cleaners or solvents.
- Inspect Components: Periodically check the rubber protective covers and suction cups for any signs of wear, damage, or degradation. Replace if necessary to ensure continued waterproof integrity and secure mounting.
- Power Cord: Inspect the power cord and adapter for any damage. Do not use if damaged.
9. Troubleshooting
- Light does not turn on:
- Ensure the power adapter is securely connected to both the light and the electrical outlet.
- Verify that the electrical outlet is functioning correctly.
- Confirm that the voltage in your region is AC 220V-240V. This light is not compatible with 110-120V systems.
- Check the power cord and light for any visible damage.
- Light colors are not as expected:
- Confirm the model you purchased (Blue+White or Multicolor RGB). The Multicolor option includes white light along with other colors.
10. User Tips
- Submersible Use: The light is designed to be fully submersible (IP68 rated), making it safe for placement directly inside your fish tank.
- Placement for Planted Aquariums: For planted aquariums, consider the light spectrum (Blue+White or RGB) to best support plant growth. RGB lights often provide a broader spectrum beneficial for plants.
- Adapter Compatibility: If you receive a China Plug, remember to use the provided EU plug adapter for compatibility with European outlets.
11. Warranty and Support
For any questions, concerns, or technical support regarding your WB Aquarium Light, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.