1. Introduction
This manual provides comprehensive instructions for the Scimagic-RC SMG-002 replacement remote control, designed for use with various NOVOFERM garage door and gate systems. This third-party remote operates on a 433.92MHz rolling code frequency, offering secure and reliable control. Please read this manual carefully before use to ensure proper setup and operation.
2. Product Overview
The Scimagic-RC SMG-002 is a robust and user-friendly replacement remote control. It features a durable metal and PVC construction, a button protector for enhanced longevity, and a heavy-duty design. Each unit comes with a free keychain and a pre-installed 3V CR2032 battery.
3. Specifications
| Feature | Description |
|---|---|
| Model Number | SMG-002-NOVOFERM remote |
| Encoding Method | Rolling code |
| Frequency | 433MHz / 433.92MHz |
| Buttons | 4 |
| Material | Metal and PVC |
| Operating Voltage | 3V (CR2032 battery) |
| Transmit Distance | 25-50m in open space |
| Dimensions (L x W x T) | 5.5cm x 3.0cm x 1.5cm |
| Certification | CE |
4. Compatibility
The Scimagic-RC SMG-002 remote control is 100% compatible with the following NOVOFERM models:
- NOVOFERM MCHS43-2
- NOVOFERM MTR43-2
- NOVOFERM MNHS433-02
- NOVOFERM MNHS433-04
- NOVOFERM NOVOTRON 502 MAX43-2
- NOVOFERM NOVOTRON 504 MAX43-4
- NOVOFERM NOVOTRON 512 MIX 43-2
- NOVOFERM MINI-NOVOTRON 522
- NOVOFERM MINI-NOVOTRON 524
- NOVOFERM MINI-NOVOTRON 522 Design
- NOVOFERM MINI-NOVOTRON 524 Design
Important: Access to your receiver/opener is required for programming. Please ensure you have access before purchasing or attempting to program.
5. Setup and Programming
Follow these steps to program your new Scimagic-RC SMG-002 remote control:
- Locate the Receiver: Open the casing of your garage door or gate receiver. The receiver is typically located next to your motor.
- Access Programming Button: On the receiver circuit board, find and press the programming button. This button may be labeled ENR, MEMO, PROG, or REC, depending on your specific model. Press it briefly and then release it.
- Observe LED: The LED light on the receiver will illuminate or begin to blink, indicating it is in programming mode.
- Program Remote: Press any button on your new Scimagic-RC remote control for approximately 1 second.
- Confirm Programming: Release the button on the remote. The LED light on the receiver should turn off immediately or within 10 seconds, confirming that your new remote control has been successfully programmed.
Your new remote control is now ready for use.
Video 1: Demonstration of remote control handling and button operation.
6. Operating Instructions
Once programmed, operating your Scimagic-RC SMG-002 remote control is straightforward:
- Activate Device: Press the programmed button on your remote control to activate your garage door or gate opener.
- Multiple Functions: If you have programmed multiple buttons for different functions (e.g., opening/closing different doors), press the corresponding button for the desired action.
- Range: The remote has an operating range of 25-50 meters in open space. Be aware that obstructions like walls, doors, or trees can significantly reduce this range.
7. Maintenance
- Battery Replacement: The remote control uses a 3V CR2032 battery. If the remote's indicator light does not illuminate or its range significantly decreases, it may be time to replace the battery. Carefully open the remote's casing to access and replace the battery, ensuring correct polarity.
- Cleaning: Wipe the remote control with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Storage: Store the remote in a dry place, away from extreme temperatures and direct sunlight.
8. Troubleshooting
- Remote Not Responding:
- Check if the battery is dead. Replace the CR2032 battery if necessary.
- Ensure the remote is within the operating range of the receiver.
- Verify that the remote was programmed correctly. Repeat the programming steps if unsure.
- Reduced Range:
- Obstructions such as walls, vehicles, or other electronic devices can interfere with the signal. Try operating the remote from a different position.
- A weak battery can also reduce range. Replace the battery.
- Ensure there are no strong radio frequency interference sources nearby.
- LED on Receiver Does Not Respond During Programming:
- Ensure you are pressing the correct programming button on the receiver.
- Check the receiver's power supply.
- Consult your original garage door/gate opener manual for specific receiver programming details.
9. User Tips
- Keep Original Remote: It's always a good idea to keep your original working remote control as a backup or for future programming reference.
- Test Range: After programming, test the remote's range from various distances and angles to understand its effective operating area in your specific environment.
- Secure Location: Store your remote control in a secure location to prevent unauthorized access to your garage or gate.
10. Warranty and Support
This product comes with a 1-year warranty from the date of purchase. For any quality problems within 7 days of receipt, returns are accepted. For technical assistance or warranty claims, please contact the seller directly. All inquiries will be responded to within 24 hours.
