HIROYASU UV-5R PLUS

Contents

Quansheng UV-5R PLUS Multi-Band Transceiver User Manual

Model: UV-5R PLUS | Brand: HIROYASU

1. Introduction

The Quansheng UV-5R PLUS is a versatile multi-band portable transceiver designed for a wide range of communication needs. It features broad frequency coverage, including VHF, UHF, FM radio, and air band reception, along with advanced functions like NOAA weather alerts, DTMF, and frequency copying. This manual provides essential information for setting up, operating, and maintaining your device to ensure optimal performance and longevity.

2. Package Contents

Please check the contents of your package carefully. If any items are missing or damaged, contact your vendor immediately.

  • 1 × UV-5R Plus Radio Body
  • 1 × 7.2V 2200mAh Li-ion Battery Pack (BPK5)
  • 1 × SMA-Female Dual Band Antenna
  • 1 × Belt Clip
  • 1 × User's Manual (ENG Manual)
  • 1 × Desktop Charger (110V ~ 240V) with correct adapter
  • 1 × Handstrap
Contents of the Quansheng UV-5R PLUS package including radio, battery, antenna, charger, manual, handstrap, and belt clip.
Figure 2.1: Included components in the product package.

3. Product Features

  • Multi-Band Transmit & Receive: Covers VHF and UHF bands for versatile communication.
  • Wide Frequency Reception: Capable of receiving across a broad spectrum from 50-600MHz, including FM radio (76-108MHz) and Air Band (108-135.9750MHz).
  • NOAA Weather Channels: Access to 10 USA NOAA weather forecast channels for emergency alerts.
  • Cross-band Intercom: Allows communication between different frequency bands.
  • Frequency Meter: Can act as a frequency meter for certain radio devices.
  • Wireless Radio Replication: Ability to copy frequencies wirelessly from other Quansheng UV-K5, UV-K6, UV-K5(8), and UV-5R Plus radios.
  • Emergency Alert: Features both automatic and manual emergency alert functions.
  • 10-Group Scrambler: Provides encrypted communication for enhanced privacy.
  • Frequency/DCS/CTCSS Scan: Supports various scanning modes for efficient channel monitoring.
  • Digital Signal CTCC/DCS: Advanced signaling capabilities.
  • High Capacity Battery: Equipped with a 2200mAh rechargeable Li-ion battery pack, offering up to 110 hours of standby time.
  • Power-On Password: Enhances security by requiring a password to power on the device.
  • VOX (Voice Operated Transmission): Enables hands-free operation.
  • Dual Band Standby: Monitors two different frequencies simultaneously.
  • DTMF and 1750 Tone: Supports DTMF signaling and 1750Hz tone burst.
  • 200 Memory Channels: Ample storage for your preferred frequencies.
  • Built-in High Light Torch: Integrated LED flashlight for illumination in low-light conditions.
  • Frog Sound Tail Signal: Unique end-of-transmission tone.
  • CHIRP Programming Support: Compatible with CHIRP software for easy programming.
  • Certifications: CE/FCC/UKCA certified for quality and safety.
Front view of the Quansheng UV-5R PLUS radio displaying its screen with frequency information.
Figure 3.1: Quansheng UV-5R PLUS with screen displaying frequency information.
Close-up of the Quansheng UV-5R PLUS showing the built-in LED flashlight at the top.
Figure 3.2: Built-in LED flashlight for low-light conditions.
Collage of images showing the Quansheng UV-5R PLUS being used in various environments: city, factory, market, hotel, construction site, port, security, camping, self-driving tour, and hiking.
Figure 3.3: Multi-environment usage scenarios for the radio.

4. Specifications

CategoryParameterValue
General
Model NumberUV-5R PLUS
Brand NameHIROYASU
OriginMainland China
MaterialPlastic
Dimensions115*50*35mm
Weight243g
Working Temperature-20°c ~ +60°c
Antenna Impedance50 ohm
Battery Capacity2200mAh
Battery IncludedYes
Waterproof / Water-ResistantNo
Is_DisplayYes
Walkie Talkie TypeCar (Portable)
Maximum Range1.5km-3km
CertificationCE, FCC, KC
Frequency & Channels
Frequency Range50-600MHz (Multi-band)
Memory Channel Number200
Channel Number for FM Commercial Radio20
NOAA Memory Channel Number10
Frequency Stability±1ppm
ModulationFM: 16KΦF3E@25KHz/11KΦF3E@12.5KHz
Receiving Parts
Referenced SensitivityFM(12dB SINAD)F1 (50-76MHz): -121dBm
F2(108-135.9975MHz): -121dBm
F3(136-173.997MHz): -123dBm
F4(174-349.9975MHz): -123dBm
F5(350-399.9975MHz): -123dBm
F6(400-469.9975MHz): -123dBm
F7(470-599.9975MHz): -121dBm
WFM(20dB SINAD)WFM(76-108MHz): -110dBm
AM(10dB S/N)F2(108-135.9975MHz): -113dBm
Audio Rated≥0.5W
Audio Distortion≤10%
Transmission Parts
Output Power3W-5W (VHF/UHF)
Working Current≤1.5A
Max. Frequency Deviation≤5KHz(25KHz), ≤2.5KHz(12.5KHz)
Modulation Distortion≤5%
Spurious Radiation≤7.5uW
Adjacent Ch. power70dB(25KHz), 60dB(12.5KHz)
Inter-modulation40dB

Note: Specifications are subject to change without notice due to technical improvement.

Diagram showing the dimensions of the Quansheng UV-5R PLUS radio: 115mm height, 50mm width, 35mm depth. Antenna length is 180mm, total height with antenna is 280mm.
Figure 4.1: Dimensions of the Quansheng UV-5R PLUS.
UK Type Examination Certificate for Two Way Radio, listing product model numbers and standards.
Figure 4.2: UK Type Examination Certificate.
EU Declaration of Conformity for Two Way Radio, listing essential requirements and applied standards for safety, EMC, and radio.
Figure 4.3: EU Declaration of Conformity.

5. Setup Guide

5.1 Battery Installation

To install the battery, align the battery pack with the grooves on the back of the radio. Slide the battery upwards until it clicks securely into place. To remove, press the release latch at the bottom of the battery and slide it downwards.

Back view of the Quansheng UV-5R PLUS radio with the battery removed, showing the battery compartment and contacts.
Figure 5.1: Battery compartment of the radio.

5.2 Antenna Attachment

Screw the SMA-Female dual band antenna clockwise onto the antenna connector at the top of the radio until it is finger-tight. Do not overtighten.

Close-up of the top of the Quansheng UV-5R PLUS radio showing the antenna connector and the antenna being screwed on.
Figure 5.2: Attaching the antenna to the radio.

5.3 Belt Clip Attachment

Attach the belt clip to the back of the radio using the provided screws. Ensure it is firmly secured for safe carrying.

Side view of the Quansheng UV-5R PLUS radio showing the belt clip attached to the back.
Figure 5.3: Radio with belt clip attached.

5.4 Charging the Battery

Insert the battery pack into the desktop charger. Connect the charger to a power outlet using the provided adapter. The indicator light on the charger will show the charging status (typically red for charging, green for fully charged). Ensure the battery is fully charged before first use.

6. Operating Instructions

6.1 Power On/Off

To power on the radio, rotate the volume knob clockwise. To power off, rotate it counter-clockwise until it clicks.

6.2 Frequency Mode vs. Channel Mode

The radio operates in two main modes: Frequency Mode (VFO) and Channel Mode (MR). In Frequency Mode, you can manually input frequencies. In Channel Mode, you can select pre-programmed channels. To switch between these modes, press the "VFO/MR" button.

6.3 Changing Frequencies/Channels

In Frequency Mode, use the keypad to directly enter the desired frequency. Use the UP/DOWN arrow buttons to fine-tune the frequency. In Channel Mode, use the UP/DOWN arrow buttons to navigate through stored channels.

6.4 Scanning

To initiate scanning, press the "Scan" button. The radio will scan through frequencies or channels depending on the current mode. Press "Scan" again to stop.

6.5 FM Radio

To access the FM radio, press the "FM" button. You can then tune to FM broadcast stations. Press "FM" again to exit FM radio mode.

A person using the Quansheng UV-5R PLUS radio to listen to FM radio, with the radio displaying 'FM VFO 94.200'.
Figure 6.1: Using the FM radio function.

6.6 NOAA Weather Channels

The radio supports 10 USA NOAA weather forecast channels. To access these, refer to the specific menu option or button combination in your detailed user manual. This feature is crucial for receiving emergency weather alerts.

Quansheng UV-5R PLUS radio displaying 'NOAA S CH-002' on its screen, indicating NOAA weather channel reception, with a snowy mountain background.
Figure 6.2: NOAA Weather Radio function.

6.7 Air Band Receiving

The radio can receive air band frequencies (108-136MHz). This allows you to listen to global airport air frequencies in real-time. Switch to Frequency Mode and input the desired air band frequency.

Quansheng UV-5R PLUS radio displaying 'AIR COPY(RDY) 410.02500 RCV:0 E:0' on its screen, with an airplane and trucks in the background, indicating air band reception capability.
Figure 6.3: Air Band Receiving capability.

6.8 Cross-band Intercom

The cross-band intercom feature allows the radio to transmit on one band while receiving on another. This advanced function requires specific setup within the radio's menu. Consult the detailed user manual for step-by-step instructions on configuring cross-band operation.

6.9 Frequency Copy (Wireless Radio Replication)

This feature allows you to quickly copy a frequency from another compatible radio. Activate the frequency copy function on your UV-5R PLUS and place it near the transmitting radio. The device will detect and replicate the frequency. This acts as a frequency meter for some devices.

Two Quansheng UV-5R PLUS radios side-by-side, one displaying 'FREQ:455.52304 DCS:D754N SCAN CMP.' and the other showing 'AIR COPY(RDY) 410.02500 RCV:0 E:0', illustrating the frequency copy feature.
Figure 6.4: Fast copy one channel function.

6.10 Scrambler

The 10-group scrambler function encrypts your voice transmissions, providing enhanced privacy. This feature can be enabled or disabled through the radio's menu settings. Refer to the menu guide for specific steps.

6.11 Torch Light

The built-in LED flashlight can be activated for illumination in dark environments. The method of activation may vary, typically involving a dedicated button press or a combination of keys. Consult your manual for the exact procedure.

6.12 Menu Navigation

The radio's functions are accessed via its menu system. Use the "MENU" button to enter the menu, the UP/DOWN arrow buttons to navigate through options, and the "EXIT" button to go back or confirm selections. A detailed list of menu options and their functions is provided in the full user manual.

Video 6.1: Demonstration of basic radio functions and menu navigation.

7. Maintenance

7.1 Cleaning

Regularly clean the radio's surface with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the charging contacts on the battery and radio are clean and free of debris.

7.2 Battery Care

To prolong battery life, avoid overcharging or completely draining the battery. Store the battery in a cool, dry place when not in use for extended periods. If the battery is not used for a long time, it is recommended to charge it every three months.

7.3 Storage

Store the radio in a dry, dust-free environment away from direct sunlight and extreme temperatures. Remove the battery if storing for long periods to prevent leakage.

8. Troubleshooting

ProblemPossible CauseSolution
Radio does not power on.Battery is not installed correctly or is depleted.Ensure battery is securely attached and fully charged.
Poor reception or transmission.Antenna is loose or damaged; operating outside range; interference.Check antenna connection. Move to an open area. Check for local interference.
Cannot change frequency/channel.Keypad lock is active; incorrect mode.Deactivate keypad lock. Ensure you are in the correct mode (Frequency or Channel).
Radio is not responding to commands.Temporary software glitch.Remove and re-insert the battery to perform a hard reset.

9. User Tips

  • For advanced frequency tuning and customization beyond the listed ranges, consider exploring third-party firmware options available on platforms like GitHub. Be aware that this may void your warranty and requires technical expertise.
  • Always ensure your battery is fully charged before extended use, especially for outdoor activities, to maximize standby time.
  • Familiarize yourself with the menu structure and common shortcuts (e.g., F+3 for mode switching) to quickly access desired functions.

10. Warranty and Support

Your Quansheng UV-5R PLUS transceiver is covered by a standard manufacturer's warranty against defects in materials and workmanship. For detailed warranty terms and conditions, please refer to the warranty card included in your package or contact your original point of purchase. For technical support, troubleshooting assistance, or service inquiries, please reach out to the authorized dealer or manufacturer's customer service department.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.