1. Introduction
This manual provides detailed instructions for the installation, setup, and operation of your MatSee Plus Tuya Smart ZigBee Energy Meter. This device is designed to monitor electricity consumption and generation bidirectionally, offering real-time data and historical statistics through the Tuya Smart or Smart Life application. It is available in 1-channel and 2-channel configurations and requires a Tuya ZigBee Gateway for functionality.
2. Safety Information
WARNING: Failure to follow these instructions may result in death or serious injury.
- The power clamp must be installed and serviced only by qualified electrical personnel.
- Do not touch the terminals of the device during testing.
- Turn off all power supply for this equipment before installing.
- Make sure that the power supply is off before connecting or disconnecting it to an auxiliary device.
- Always use a properly rated voltage sensing device to confirm power is off.

Image: Electrical safety warning symbol.
3. Specifications
| Feature | Specification |
|---|---|
| Input Voltage | AC 100-240V 50/60Hz |
| Measuring Range | 0.2-80A |
| Wireless Frequency | 2.4GHz (Not Support 5Ghz) |
| Communication Method | Zigbee |
| Protocol | Tuya ZigBee |
| Error | Within ±2% |
| Module Size | 50 x 45 x 23mm |
| Clamp Diameter | 10mm |
| Clamp Cable Length | 0.7m - 1m (depending on model) |
| Working Temperature | -10 °C ~ +55 °C |
| State of Assembly | Ready-to-Go |
| Compatibility | All Compatible (with Tuya ZigBee Gateway) |
| Certification | CE, RoHS |
| App Name | Tuya Smart, or Smart Life |
| Gateway Requirement | Tuya ZigBee Gateway is required |
| Channel Options | 1 and 2 Channel available |
Image: Product dimensions for the energy meter (50mm x 46mm) and current transformer clamp (10mm diameter, 0.7m cable).

4. Package Contents
Your package should contain the following items:
- MatSee Plus Tuya Smart ZigBee Energy Meter (1 or 2 channel, depending on your purchase)
- Current Transformer (CT) Clamps (1 or 2, depending on your purchase)
Image: Overview of the MatSee Plus ZigBee Energy Meter and its accompanying current transformer clamps.

5. Setup Guide
5.1 Prerequisites
- A Tuya ZigBee Gateway (Hub) is required for this device to function. It cannot connect directly to Wi-Fi.
- A stable 2.4GHz Wi-Fi network for your ZigBee Gateway.
- A smartphone with the Tuya Smart or Smart Life app installed.
5.2 App Download
Download the 'Smart Life' or 'Tuya Smart' application from your device's app store:
- Scan the QR code provided in the product packaging or search for 'Smart Life' or 'Tuya Smart' in the App Store (iOS) or Google Play Store (Android).
Image: QR codes for downloading the Smart Life and Tuya Smart apps from App Store and Google Play.


5.3 Wiring Diagram
Before proceeding with wiring, ensure the main power supply is OFF. The device supports 35mm DIN rail mounting.
Note: When installing, please ensure that the circuit measured by the Current Transformer (CT) is in the same phase as the circuit powered by the module.
Image: Diagram showing the energy meter mounted on a 35mm DIN rail.

Image: Wiring diagram for measuring energy consumption and generation, showing connections to Solar Panel, Inverter, Grid, AC Distribution Box, Load, and the energy meter with CT clamps.

Image: Wiring diagram for measuring 'from Grid' or 'to Grid' energy flow, illustrating connections between Grid, AC Distribution Box, Load, Inverter, Solar Panel, and the energy meter with CT clamps.

5.4 Device Pairing (ZigBee)
To add the ZigBee Energy Meter to your app:
- Ensure your Tuya ZigBee Gateway is already set up and connected to the app.
- Power on the ZigBee Energy Meter.
- Press and hold the reset button on the energy meter for approximately 5 seconds until the red LED light flashes quickly (blinking or breathing).
- In the Tuya Smart or Smart Life app, navigate to your ZigBee Gateway and select 'Add subdevice'.
- Confirm that the device's LED is blinking in the app and proceed with the pairing process.
- Once successfully added, click 'Done'.
Video: Demonstration of pairing the ZigBee Energy Meter with a Wireless Zigbee Gateway via the app, including pressing the reset button and confirming successful addition.
Image: App screenshot showing the process of adding a subdevice to a Wireless Zigbee Gateway, highlighting the 'Add subdevice' button and the 'LED already blink' confirmation.

6. Operating Instructions
6.1 CT Clamp Direction
WARNING: FOR SAFETY. If you need to remove the current transformer clamp, please be sure to turn off the power of the measuring device first, otherwise there is a risk of electric shock.
The direction of the CT clamp is crucial for accurate bidirectional measurement. Please ensure the clamp is put on the correct direction:
- If your solar system is generating power (working), adjust the clamp's direction until the app shows 'Reverse'.
- If your solar system is not generating power (not working), adjust the clamp's direction until the app shows 'Forward'.
Perform this adjustment for each channel.
Image: App screenshots demonstrating 'Forward' and 'Reverse' energy readings based on CT clamp direction, showing real-time voltage, frequency, total power, power factor, current, and power for Channel A and B.

Image: A current transformer clamp correctly installed on a single wire, indicating safe and proper connection for measurement.

6.2 App Interface Overview
The app provides comprehensive monitoring capabilities:
- Real-time Data: Displays Channel A and B real-time power, current, voltage, power factor, and frequency for both forward and reverse directions.
- Electricity Statistics: Provides hourly, daily, monthly, and yearly electricity consumption (KWh) for each channel, and total forward/reverse direction.
Image: App screenshot showing real-time power, current, voltage, power factor, and frequency for Channel A and B, with options for 'Energy Monitor' and 'Calibration'.

Image: App screenshots displaying electricity statistics over day, month, and year for Channel A, Channel B, and total, showing forward and reverse energy graphs.

6.3 Automation and Scene Creation
You can create smart scenes and automations within the Tuya Smart or Smart Life app to integrate your energy meter with other Tuya-compatible devices.
- Set conditions based on measured values (e.g., if power or current exceeds a certain threshold).
- Trigger actions on other devices (e.g., turn on/off a smart switch) or send notifications.
Image: App screenshot showing the 'Create Scene' interface, allowing users to set conditions based on device status changes, such as power, voltage, or current values, to trigger actions on other smart devices.

Image: App screenshot illustrating the setup of an automation rule: 'If Current_B is greater than 1000mA, then turn on Zigbee Switch POWER1.ON' and options to control single devices or send notifications.

7. Maintenance
- Keep the device clean and free from dust. Use a dry, soft cloth for cleaning.
- Ensure all wiring connections remain secure. Periodically check for any loose connections.
- Avoid exposing the device to extreme temperatures or humidity outside its specified operating range.
8. Troubleshooting
8.1 Common Issues & Solutions
- Q: Why can't my device connect to 2.4G WiFi?
A: This is a ZigBee device. It cannot connect to a Wi-Fi signal directly. It requires a Tuya ZigBee Gateway (hub) to work. Please ensure you have a Tuya ZigBee Gateway. - Q: After I configure it with the App, why does the App show 'Current' and 'Power' as '0'?
A: The clamp senses current only when a device's wire (either live or neutral, but not both) is placed within the clamp and the device is turned on. Ensure the wire is correctly placed and the monitored device is active. - Q: After I change the report rate to less than 10 seconds, why does my App seem stuck?
A: This indicates the network return is too slow. Please sign out of the App and re-enter to change the rate back to 10 seconds. This should resolve the issue. - Q: How to clear App electricity data?
A: 1. Press the reset button 5 times quickly. The indicator LED will blink quickly. If it fails to blink, repeat the action until it blinks quickly. 2. After 10 seconds, go to the App page and click 'Disconnect and wipe data'.
8.2 Compatibility Notes
- ZigBee 3.0 Standard: This is a Tuya ZigBee device, not strictly ZigBee 3.0 Standard. It is designed to work only with a Tuya ZigBee Gateway.
- Zigbee2MQTT: The device is compatible with Zigbee2MQTT, but requires specific setup knowledge. The internal ID is `_TZE284_81yrt3lo`. You may need to install a quirk: `github.com/jeverley/zha-device-handlers/blob/ts0601_energy_meter_devices/zhaquirks/tuya/ts0601_energy_meter.py`.
- HomeAssistant: This device is not directly compatible with HomeAssistant. You need to configure it with Zigbee2MQTT first, and then it can work with Home Assistant. If you are unfamiliar with this configuration, it is recommended to use the Tuya Smart or Smart Life App.
9. User Tips
- Always double-check the CT clamp direction in the app, especially if you have a solar setup, to ensure accurate forward and reverse energy readings.
- For initial setup, ensure your ZigBee Gateway is powered and connected before attempting to pair the energy meter.
- If you experience delays or unresponsiveness in the app, try resetting the report rate to 10 seconds as a first troubleshooting step.
10. Warranty and Support
For detailed warranty information and technical support, please refer to the official product documentation or contact MatSee Plus customer service. A comprehensive user manual is also available in PDF format for download from the seller's website or by scanning the QR code provided with the product.
PDF User Manual: View User Manual (PDF)