1. Product Overview
The New Bee Z12 is a stylish and practical headphone stand featuring RGB lighting, a wireless charging function, and three expansion ports. It is designed to provide convenient charging and data transmission for headphones, cellphones, USB flash drives, and other devices, while also helping to save desk space. The non-slip rubber base ensures excellent stability, preventing accidental tipping or displacement during use.
The Z12 RGB Headphone Stand in a typical desktop setup, showcasing its RGB lighting and charging capabilities.
2. Product Components
Familiarize yourself with the different parts of your Z12 RGB Headphone Stand:
- Top Tray: The upper part where headphones rest.
- Supporting Pole: The vertical shaft connecting the top tray and base, featuring RGB lighting.
- Base: The stable foundation of the stand, housing the wireless charger and expansion ports.
- Wireless Charging Area: The designated spot on the base for wireless charging compatible devices.
- Lighting Module: The internal component responsible for the RGB lighting effects.
- Multi-function Key: Button on the base to control lighting effects.
- Expansion Port: USB and USB-C ports for charging and data transfer.
- Screw: Used for assembling the stand.
- Silicone Decorative Sheet: Applied to the top tray for aesthetic and protective purposes.
Detailed view of the Z12 components.
3. Setup and Installation
Follow these steps to assemble and set up your headphone stand:
- Step 1: Attach Top Tray to Supporting Pole. Align the threaded side of the top tray with the screw hole of the supporting pole. Insert the screw and tighten it securely.
- Step 2: Apply Silicone Decorative Sheet. Remove the release paper from the silicone decorative sheet and carefully stick it onto the corresponding area of the top tray.
- Step 3: Attach Supporting Pole to Base. Align the threaded side of the supporting pole with the screw hole in the base. Insert the screw from the bottom of the base and tighten it firmly.
- Step 4: Connect to Power. Once assembly is complete, plug the stand into the USB port of an available device (e.g., computer, USB wall adapter) to power it on.
Visual guide for the installation process.
What's in the box: Headphone Stand with Wireless Charger Base, User Manual, Cleaning Cloth.
4. Operating Instructions
Power On/Off
The product is plug-and-play. It will automatically turn on when powered. To turn off the unit, disconnect it from the power source.
RGB Lighting Control
Upon powering on, the RGB lights will default to a seven-color cycle lighting effect. Use the multi-function key on the base to switch between lighting modes:
- Seven Colors Cycle Lighting Effect
- Seven Colors Breathing Light Effect
- Monochromatic Lighting Effect (Blue, Green, Red, Purple)
To turn off or turn on the light effect, press and hold the multi-function key for three seconds.
Explore various RGB lighting modes to match your setup.
Wireless Charging
Simply place your Qi-compatible devices (e.g., smartphones, TWS earbuds) on the wireless charging area of the base to begin charging. The wireless charging power is 5W.
Wireless charging for compatible phones and AirPods.
Expansion Ports
The stand features two USB-C 2.0 ports and one USB-A 2.0 port. These ports can be used to transfer files or charge other smart devices such as phones, iPads, USB flash disks, keyboards, and mice.
Utilize the three expansion ports for charging and data transmission.
Official product video demonstrating RGB lighting effects, expansion ports, and wireless charging capabilities.
5. Maintenance
- Clean the product with a clean, soft, and dry cloth.
- Disconnect the power when the product is not in use to prolong its service life.
6. Troubleshooting
- Low Wireless Charging Power or Interrupted Operation: If all three expansion ports are used simultaneously, this may lead to reduced wireless charging power or suspend operation. If the power supply cannot meet the demand, it is recommended to connect the stand to a 5V-2A charger.
- Device Compatibility: This product does not support devices with private protocol requirements or current requirements greater than 5V=1.5A. Ensure your devices meet these specifications for optimal performance.
7. Specifications
| Feature | Detail |
|---|---|
| Product Model | Z12 |
| Expansion Ports | 2 x Type-C 2.0, 1 x USB-A 2.0 |
| Input Voltage | DC 5V |
| Product Dimensions | 151 x 113 x 265 mm (5.98 x 4.45 x 10.4 inches) |
| Product Net Weight | Approx. 290g |
| Cable Specification | 1.5m / 1.5A |
| Wireless Charging Power | 5W |
| Material | Metal |
| Package Size | 26.29 x 17.2 x 4 cm |
| Package Weight | 470g |
Detailed dimensions of the Z12 Headphone Stand.
8. User Tips
- Headphone Protection: The soft rubber on the top tray protects your headphone's head beam from scratches, even after long periods of hanging.
- Enhanced Stability: The silicone non-slip pads on the bottom of the base ensure the stand remains stable on smooth surfaces, preventing accidental falls.
- Wireless Charging Compatibility: The wireless charger provides 5W of power. Ensure your device supports Qi wireless charging and has compatible power requirements for optimal performance.
9. Support and Contact Information
For any questions, concerns, or if you are not satisfied with your product, please feel free to contact us:
- Email: support@anewbee.com
- Telephone (USA): 1-626-701-7623
- Telephone (UK): 07845854035
- Website: www.anewbee.com
- Address: 3rd Fl, Bldg E, Guanghao Ind., No. 23, Yunfeng Rd, Dalang St., Longhua Dist., Shenzhen City, Guangdong Prov., China
A comprehensive user manual in PDF format is also available for download: User Manual (PDF)