1. Product Overview
The Bakon BK2000s is a professional 120W high-frequency soldering station designed for precision soldering tasks, including SMD welding and phone repair. It features advanced temperature control, rapid heating, and a user-friendly interface.
This soldering station utilizes a high-frequency eddy current heating technique, which offers several advantages over traditional low-frequency stations:
- Faster Heating Speed: Heat is directly transferred to the iron head, reducing heat conduction time and loss.
- Improved Temperature Stability: The sensing core is located at the tip of the iron head, allowing for more sensitive temperature detection and quicker temperature recovery.
- Rapid Temperature Rise: Achieves peak high temperatures in approximately 20 seconds, capable of easily melting 5mm solder spots.
Figure 1: High Frequency Eddy Current Technique Diagram. The diagram shows the heating core inner layer, sensing core, and soldering tip, highlighting how electromagnetic high-frequency eddy current heat is generated and sensed for precise temperature control.
Video 1: Product demonstration, including unboxing, setup, temperature adjustment, and soldering examples.
2. Package Contents
Before proceeding with setup, please verify that all items listed below are present in your package:
- Main machine (Soldering Station Host) x 1
- Power cord x 1 (EU or US plug, depending on region)
- LF202C Soldering Handle x 1
- Soldering Iron Holder with Cleaning Sponge and Cleaning Ball x 1
- Instruction Manual x 1
Figure 2: Complete package contents of the Bakon BK2000s Soldering Station.
3. Setup Instructions
Follow these steps to set up your Bakon BK2000s Soldering Station:
- Place the main soldering station unit on a stable, heat-resistant surface.
- Connect the soldering handle (LF202C) to the designated port on the front of the main unit. Ensure the connection is secure.
- Place the soldering iron holder in a convenient location next to the main unit. Insert the cleaning sponge and cleaning ball into their respective compartments in the holder.
- Connect the power cord to the power socket on the rear of the main unit.
- Plug the power cord into a suitable electrical outlet (AC100-240V).
- Turn on the power switch located on the rear panel of the main unit.
Figure 3: Front Panel Controls and Connections. This image highlights the display screen, setting keys (up, down, function), and quick keys (CH1, CH2, CH3) for temperature adjustment.
Figure 4: Rear Panel Connections. This image shows the power switch, fuse, and power socket for the main unit.
4. Operating Instructions
4.1. Power On and Initial Display
After connecting the power and turning on the switch, the large screen display will activate. The display shows the current temperature and set temperature. The unit supports both Celsius (℃) and Fahrenheit (℉) temperature settings.
Figure 5: Large Screen Display. The display provides intuitive readings of temperature settings and allows for F/C toggle.
4.2. Temperature Adjustment
You can adjust the temperature using the Up and Down keys. The temperature range is 100℃-480℃ (212℉-896℉).
Figure 6: Shortcut Key Temperature Presets. Customize your regularly used temperature settings with 3 channels: CH1 (350°C) for micro welding, CH2 (365°C) for general welding, and CH3 (380°C) for sensitive components.
4.3. Automatic Sleep Function
The soldering station is equipped with an automatic sleep function to protect components, prolong service life, and reduce oxidation of the soldering iron tip. If the iron is left unmoved for a set period (10-60 minutes), it will enter sleep mode, reducing the tip temperature.
Figure 7: Automatic Sleep Function. The display shows the auto sleep timer, adjustable from 10 to 60 minutes.
4.4. Password Lock
The station includes a password protection feature to prevent unauthorized changes to system settings during the production process. The password range is 0000-9999.
Figure 8: Password Lock Feature. This prevents unauthorized system setup changes.
5. Maintenance
5.1. Soldering Tip Cleaning
Regular cleaning of the soldering iron tip is crucial for optimal performance and longevity. Use the provided cleaning sponge and cleaning ball.
- Cleaning Sponge: Dampen the sponge slightly with water. Wipe the hot soldering tip on the sponge to remove excess solder and flux residue.
- Cleaning Ball: For more stubborn residue, gently rub the hot soldering tip into the brass cleaning ball. This effectively removes oxidation without damaging the tip.
Figure 9: Soldering Iron Stand with Cleaning Accessories. The stand includes a cleaning sponge and a cleaning ball for tip maintenance.
5.2. General Care
- Always turn off the power and unplug the station when not in use or before cleaning.
- Keep the station and soldering iron clean and free from dust and debris.
- Store the soldering iron in its holder when not actively soldering to prevent accidental burns and activate the auto-sleep function.
6. Troubleshooting
The Bakon BK2000s soldering station includes built-in protection features and error indicators to assist with troubleshooting.
6.1. Error Messages
- 'SE' on screen: Indicates a sensor abnormality. Check the connection of the soldering handle to the main unit. If the issue persists, the sensor may be faulty.
- 'H-E' on screen: Indicates heating core short circuit protection. This means there is a short circuit in the heating element. Disconnect the soldering iron and check for any visible damage.
Figure 10: Short Circuit Protection and Sensor Abnormality Reminder. The display shows error codes 'H-E' and 'S-E' for heating core short circuit and sensor abnormality, respectively.
6.2. Power Issues
- No power: Ensure the power cord is securely connected to both the station and the electrical outlet. Check if the power switch is in the 'ON' position. Verify the electrical outlet is functioning.
- Built-in Fuse: The unit has a built-in fuse to prevent damage from abnormal voltage. If the unit does not power on, the fuse may need to be checked and replaced. Refer to the rear panel diagram for the fuse location.
Figure 11: Built-in Fuse. This fuse effectively prevents abnormal voltage from damaging the host unit.
7. Specifications
| Category | Parameter | Value |
|---|---|---|
| Host Unit | Output Power | 120W (max) |
| Input Voltage | AC100-240V | |
| Plug Specification | EU, US | |
| Operating Temperature | 10-45℃ | |
| Operating Humidity | 45-80%RH | |
| Soldering Handle | Power | 90W |
| Input Voltage | AC380KHZ | |
| Temperature Range | 100℃-480℃ / 212℉-896℉ | |
| Temperature Stability | ±2℃ | |
| Voltage from Iron Tip to Ground | ≤2mV | |
| Resistance from Iron Tip to Ground | ≤2Ω | |
| Accessories | Handle Model | LF202C |
| Heating Core Model | H90C | |
| Soldering Iron Tip Model | BK200M | |
| General | Origin | Mainland China |
| Certification | CE, FCC |
8. User Tips
- The BK2000s model is certified with CE and FCC, ensuring it meets high safety, health, and environmental protection standards.
- Utilize the quick temperature adjustment presets (CH1, CH2, CH3) for frequently used temperatures to save time and ensure consistent results for different tasks.
- The auto-sleep function is beneficial for extending the life of your soldering tips. Ensure the iron is placed in its holder when not in active use to engage this feature.
9. Warranty and Support
The main engine of the Bakon BK2000s Soldering Station is guaranteed for one year. Accessories are also covered. For any issues or support, please contact the BAKON Official Store customer service. They typically respond within 7-24 hours.