1. Introduction
Thank you for choosing the Annke CPT800 4K PoE PT Security Camera. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your camera to ensure optimal performance and security.
The Annke CPT800 is a high-performance 4K PoE Pan & Tilt security camera designed for both indoor and outdoor surveillance. It features 4K (3840x2160) resolution, smart dual-light color night vision, human and vehicle detection with auto-tracking, two-way audio, and H.265+ video compression for efficient storage.
Video: Annke CPT800 4K PT PoE Camera Overview, demonstrating features like 345° pan, 80° tilt, auto-tracking, 4K UHD quality, two-way audio, and smart dual light night vision.
2. What's in the Box
Please check the package contents upon receipt. If any items are missing or damaged, contact customer support.
- IP Camera
- Waterproof Lid
- Quick Start Guide
- Surveillance Sign
- Mounting Plate
- Mounting Hole Template
- Pack of Screws
Note: Camera and accessories may vary with different models. Please refer to the actual product.
Image: Diagram showing the contents of the product package.
3. Camera Introduction
Familiarize yourself with the camera's components:
- Mount: For securing the camera.
- Lens: 2.8mm HD Lens.
- Built-in Mic: For audio input.
- Supplement Lights: IR LEDs for night vision.
- Network Cable Port: RJ45 for Ethernet connection.
- Power Port (Optional): For DC 12V power supply.
- SD Card Slot: Supports microSD card up to 512 GB for local storage.
- Reset Button: For factory reset.
- Built-in Speaker (Optional): For two-way audio output.
Note: Functions and structures may vary with different models.
Image: Detailed diagram of the camera's external components and ports.
4. Setup
4.1 Connection Diagram
The camera can be connected to an Annke PoE NVR or directly to a router.
4.1.1 Work with ANNKE PoE NVR
Connect the network camera to a PoE port of an ANNKE PoE NVR using an Ethernet cable. The network camera's surveillance footage can then be recorded to the PoE NVR's hard drive.
Image: Connection diagram for the camera with an ANNKE PoE NVR.
4.1.2 Work with Router
Connect the network camera to a LAN port on the router using an Ethernet cable. Power the network camera using a DC 12V adapter or a PoE powered device (e.g., PoE injector, PoE switch). Surveillance footage can be stored on a TF card. Unscrew the cover, insert a memory card, then screw the cover back on.
Image: Connection diagram for the camera with a router, illustrating both PoE and DC 12V power options.
4.2 Set Up the Network Camera
For first-time access, activate the device via the mobile app ANNKE Vision, web browser, SADP, desktop client software Guarding Vision, or ANNKE DVR & NVR. For remote viewing, enable platform access, set a verification code, and add the device to an ANNKE Vision app account.
4.2.1 On Smartphone
Scan the QR code below to download and install the ANNKE Vision App. Register an account and add the device to your app account. The app is available on Google Play and Apple App Store.
For iOS
For Android
4.2.2 On PC
Download and install SADP or Guarding Vision software from the official website: https://www.annke.com/pages/download-center. All camera functions can be configured through the web page and Guarding Vision software.
4.2.3 Preview through RTSP protocol
The correct description of RTSP for the IP camera is as follows:
rtsp://username:password@IP:port/code/channel/sub type/av_stream
Example:
rtsp://admin:qwer1234@192.168.1.64:554/H265/ch 1/main/av_stream
4.3 Connect to ANNKE PoE NVR
Connect the IP camera to an NVR PoE port with a network cable. If the IP camera is inactivated or the activation password is the same as the NVR, the NVR will automatically add it. Otherwise, you can manually enter the correct password of the IP camera.
4.4 Connect to other brands recorder
For earlier versions, navigate to Configuration > Network > Advance Setting > Integration Protocol, enable ONVIF function, and create an ONVIF account and password. For newer versions, the network camera's username and password also serve as the ONVIF username and password. The ONVIF account and password will be used when adding the network camera to a third-party NVR or DVR.
5. Mounting the Network Camera
Follow these steps for installation:
- Drill holes according to the mounting hole template. Use the expansion bolts included in the package if needed. Install the base with the self-tapping screws included in the package.
- Route the cables through the cable hole or the side opening. Mount the camera to the mounting plate and turn the camera clockwise to lock it tightly.
- Power on the network camera. Check if the image angle is suitable through the web page, monitor, or app. Adjust the angle of the network camera if necessary.
Image: Mounting steps for the camera.
6. Waterproofing the Network Camera
While the IP camera itself is waterproof, the connecting cable is not. Ensure the tail cable is properly waterproofed.
- Install the network cable waterproof jacket as shown in the diagram.
- Use waterproof tapes to wrap up all the cables.
Note: Do not put the rubber O-ring in a wrong position, otherwise there will be a gap which may lead to water ingress.
Image: Waterproofing steps for the network cable.
7. Operating Instructions
7.1 4K Clarity and Wide Coverage
The camera delivers exceptionally sharp, detailed 4K (3840 × 2160) videos thanks to its 1/2.4" Progressive Scan CMOS sensor and F1.6 large aperture. The 2.8mm wide-angle lens provides a horizontal FOV of 105°, vertical FOV of 55°, and diagonal FOV of 127°, ideal for monitoring large areas.
Image: Example of 4K clarity video from the camera.
Image: Illustration of the camera's wide field of view.
7.2 Pan & Tilt Control
Remotely control the camera to pan horizontally up to 345° and tilt vertically up to 80° to cover a broader perspective of the monitored space. This is ideal for overseeing extensive locations like parking lots, outdoor areas, and warehouses.
Image: Panoramic view demonstrating pan and tilt capabilities.
7.3 Smart Dual Light Night Vision
The camera features a smart dual light mode for clear night vision up to 30 meters. By default, it uses infrared light at night. If a moving target is detected, the white light activates, and infrared turns off to capture a clear color image. You can also choose full infrared or full white light mode.
Image: Comparison of different night vision modes (Color, IR, Smart Dual-Light).
7.4 Intelligent AI Detection & Auto-Tracking
Built-in AI technology accurately detects human presence and vehicles, reducing false alarms. With auto-tracking Lite, the camera keeps moving targets in the frame, ensuring complete visibility.
Image: Human detection and auto-tracking in action.
7.5 Real-Time Two-Way Audio
The built-in microphone and speaker allow you to listen and talk back in real-time. Greet visitors or warn intruders. The camera supports filtering environmental noise and records videos with vivid sound.
Image: Two-way audio interaction.
7.6 Video Compression and Storage
The camera uses H.265+/H.265 coding, which stores more information using fewer hard drives, saving up to 75% storage space compared to H.264. It supports local storage via a microSD/SDHC/SDXC card slot, up to 512 GB.
Image: H.265+ video compression efficiency.
Image: Built-in TF card slot for local storage.
7.7 Power Options
The camera can be powered via PoE (Power over Ethernet) with an NVR/PoE injector or by plugging it into an outlet using a DC 12V adapter.
7.8 Weatherproof Design
The camera is IP66 weatherproof, designed to withstand extreme indoor and outdoor conditions ranging from -30 °C to 40 °C (-22 °F to 104 °F).
Image: IP66 Weatherproof rating and temperature resistance.
7.9 Image Enhancement
Features like 3D DNR (Digital Noise Reduction) and 120 dB True WDR (Wide Dynamic Range) ensure clear images in various lighting conditions, reducing noise and balancing exposure in high-contrast scenes.
Image: 3D DNR and 120 dB True WDR in action.
8. Maintenance
To ensure the longevity and optimal performance of your Annke CPT800 camera, follow these maintenance guidelines:
- Regularly clean the camera lens with a soft, lint-free cloth to remove dust and smudges.
- Ensure all cable connections are secure and free from damage.
- Keep the camera's firmware updated to the latest version for improved features and security.
- If the product does not work properly, please contact support@annke.com. We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.
9. Troubleshooting
This section addresses common issues you might encounter with your Annke CPT800 camera.
9.1 Emergency Situations
If smoke, odor, or noise rises from the device, immediately turn off the power and unplug the power cable. Then, contact the device seller or Annke support.
9.2 Common Issues
- No Power: Check the power connection (PoE or DC 12V adapter). Ensure the power source is active.
- No Video Feed: Verify network cable connection. Ensure the camera is activated and added to your NVR or app. Check network settings and RTSP stream configuration.
- Poor Image Quality: Clean the lens. Check for obstructions. Ensure sufficient lighting for optimal night vision performance. Adjust image enhancement settings (3D DNR, WDR) if available in the software.
- Motion Detection Not Working: Ensure human/vehicle detection is enabled in the camera settings. Check detection zones and sensitivity.
- Two-Way Audio Issues: Verify microphone and speaker settings in the app or software. Check network connectivity for real-time audio transmission.
10. Specifications
| Category | Feature | Specification |
|---|---|---|
| Camera | Image Sensor | 1/2.4" Progressive Scan CMOS |
| Max Resolution | 4K (3840*2160) | |
| Main Stream | 50 Hz: 20fps (3840*2160, 3200*1800, 2688*1520, 1920 × 1080, 1280 × 720) 60 Hz: 20fps (3840*2160, 3200*1800, 2688*1520, 1920 × 1080, 1280 × 720) | |
| Substream | 50 Hz: 10 fps (1280 × 720), 20fps (640 × 480, 640 × 360) 60 Hz: 10 fps (1280 × 720), 20fps (640 × 480, 640 × 360) | |
| Video Compression | Main stream: H.265+/H.265/H.264+/H.264 Sub-stream: H.265/H.264/MJPEG | |
| Video Bit Rate | 256 Kbps to 16384 Kbps | |
| Lens | 2.8 mm@F1.6 | |
| FOV | Horizontal FOV 105°, vertical FOV 55°, diagonal FOV 127° | |
| Supplement Light | Smart IR&White Light, up to 30 m | |
| Min. Illumination | Color: 0.001 Lux, B/W: 0.0005 Lux, 0 Lux with light | |
| Movement Range | Pan: 0° to 345°, Tilt: 0° to 80° | |
| Pan Speed | Up to 25°/s | |
| Tilt Speed | Up to 20°/s | |
| Audio Input | Built-in microphone, record with audio | |
| Audio Output | Built-in Speaker, support 2-way audio and audio alarm | |
| Audio Compression | G.711alaw/G.711ulaw/G.722.1/G.726/MP2L2/PCM/AAC/MP3 | |
| Audio Bit Rate | 64 Kbps (G.711)/16 Kbps (G.722.1)/16 Kbps (G.726)/32 to 160 Kbps (MP2L2)/16 to 64 Kbps (AAC-LC) | |
| Audio Sampling Rate | 8 kHz/16 kHz | |
| Environment Noise Filtering | Yes | |
| Image Enhancement | 3D DNR, BLC, HLC | |
| Protocols | IPv4/IPv6, HTTP, HTTPS, QoS, FTP, SMTP, UPnP, DNS, DDNS, NTP, RTSP, RTP, RTCP, TCP/IP, UDP, DHCP, Bonjour | |
| API | Open Network Video Interface Version 19.12 (Profile S, Profile G, Profile T) | |
| Basic Event | Motion detection 2.0 (human&vehicle detection), audio exception detection | |
| General Function | Mirror, password protection, watermark, auto trackinglite | |
| General | Material | Plastic |
| Color | White & black | |
| Operating Power | 12 VDC ± 25%, 0.75 A, max. 9 W; PoE (802.3af), max. 10.5 W | |
| Ethernet Interface | 1 RJ45 10 M/100 M self-adaptive Ethernet port | |
| Storage | Support MicroSD Card (up to 512 GB) | |
| Operating Temperature | -30 °C to 40 °C (-22 °F to 104 °F) | |
| Indoor/Outdoor | Indoor/Outdoor | |
| Protection Level | IP66 | |
| Dimension | 163.9 mm × 185.8 mm × 131.9 mm (6.45" × 7.31" × 5.19") | |
| Weight | 600 g (1.32 lb.) |
11. User Tips
- For mobile access and setup, always use the official ANNKE Vision App.
- Ensure your network connection is stable for optimal 4K streaming and two-way audio performance.
- Regularly check for firmware updates on the Annke website to benefit from the latest features and security enhancements.
12. Warranty and Support
12.1 Limited Warranty
This product comes with a 2-year limited warranty that is valid only if purchased from ANNKE.
12.2 Contact Information
For technical support or inquiries, please contact Annke:
- Email: support@annke.com
- Web: http://help.annke.com
- Phone (US and CA): +1 833 717 0187 (7:00 am - 7:30 pm, EST, Weekday)
- Phone (UK): +44 8081966228 (12 am - 8 pm, GMT, Weekday)
- Address: Room 1001, Rujun Building, No.105 Center Road, Bantian Street, Longgang District, Shenzhen, China.518000
13. Regulatory Information
13.1 FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The limits for a Class B digital device are designed to provide reasonable protection against harmful interference in a residential installation.
13.2 EU Conformity Statement
ANNKE declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
Products marked with the WEEE symbol (crossed-out wheeled bin) cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.
13.3 Disclaimer
⚠️ Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.
14. Safety Instructions
14.1 Laws and Regulations
The device should be used in compliance with local laws, electrical safety regulations, and fire prevention regulations.
14.2 Electricity
In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region. The equipment shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the equipment.
14.3 System Security
Please understand that you have the responsibility to configure all passwords and other security settings about the device, and to keep your username and password secure.