Touch TWS208 Wireless Earbuds User Manual

1. Introduction

Welcome to the user manual for your new Touch TWS208 Wireless Earbuds. These in-ear headphones feature TWS 5.0 technology, active noise cancellation, and a waterproof design, providing a high-quality audio experience. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your earbuds.

2. Package Contents

Please check the box for the following items:

• Touch TWS208 Wireless Earbuds (Left and Right)
• Charging Case
• USB Charging Cable
• User Manual

3. Specifications

4. Setup

4.1 Charging the Earbuds and Case

Before first use, ensure both the earbuds and the charging case are fully charged.

1. Place the earbuds into the charging case. Ensure they are correctly seated to make contact with the charging pins.
2. Connect the USB charging cable to the charging port on the case and plug the other end into a compatible USB power source (e.g., computer, wall adapter).
3. The charging case has a power display (LED indicators) to show the charging status.
4. Charging time for the earbuds and case is approximately 1-2 hours.

4.2 Pairing with a Device

The TWS208 earbuds feature auto-pairing for convenience.

1. Open the charging case. The earbuds will automatically power on and enter pairing mode.
2. On your device (smartphone, tablet, etc.), enable Bluetooth.
3. Search for available Bluetooth devices and select "TWS208" from the list.
4. Once connected, you will hear an audible confirmation, and the earbuds' indicator lights will change (e.g., turn off or flash slowly).
5. For subsequent uses, the earbuds will automatically connect to the last paired device when removed from the case.

5. Operating Instructions

The TWS208 earbuds utilize smart touch controls for various functions.

5.1 Touch Controls

The earbuds feature a touch-sensitive area for controlling playback, calls, and voice assistant activation. Refer to the diagram below for the touch control area.

• Play/Pause: Single tap on either earbud.
• Next Track: Double tap on the right earbud.
• Previous Track: Double tap on the left earbud.
• Answer/End Call: Single tap on either earbud.
• Reject Call: Press and hold on either earbud.
• Activate Voice Assistant (Siri): Triple tap on either earbud.
• Volume Control: The earbuds support volume control. Specific gestures for volume up/down are typically a long press on one earbud (e.g., right for volume up, left for volume down), but may vary. Please experiment or refer to the quick start guide for precise actions.
• Active Noise Cancellation: The earbuds feature active noise cancellation. Activation/deactivation is usually controlled by a specific touch gesture (e.g., long press or multiple taps).

5.2 Making and Receiving Calls

The TWS208 supports dual earbud talking for clear communication.

• When a call comes in, tap either earbud once to answer.
• To end a call, tap either earbud once.
• To reject an incoming call, press and hold the touch area on either earbud.

6. Maintenance

To ensure the longevity and optimal performance of your TWS208 earbuds, follow these maintenance guidelines:

• Cleaning: Use a soft, dry, lint-free cloth to clean the earbuds and charging case. Do not use harsh chemicals or abrasive materials.
• Water Resistance: The earbuds are IPX-4 waterproof, meaning they are resistant to splashing water from any direction. They are not designed for submersion. Do not expose them to running water or wear them while swimming. Ensure they are dry before placing them back in the charging case.
• Storage: Store the earbuds in their charging case when not in use to protect them from dust and damage. Keep them in a cool, dry place away from extreme temperatures.
• Charging: Use only the provided USB charging cable or a certified equivalent. Avoid overcharging.

7. Troubleshooting

If you encounter issues with your TWS208 earbuds, try the following solutions:

7.1 Pairing Issues

• Earbuds not pairing with device:
  1. Ensure the earbuds are charged and out of the charging case.
  2. Turn off Bluetooth on your device and turn it back on.
  3. Forget/delete "TWS208" from your device's Bluetooth list and attempt to pair again.
  4. Ensure the earbuds are within the 10-meter operation range of your device.
• Only one earbud connecting:
  1. Place both earbuds back into the charging case, close the lid, wait a few seconds, then open the lid and remove them. This often resets their connection to each other.
  2. If the issue persists, try resetting the earbuds (refer to the quick start guide for specific reset instructions, if available).

7.2 Audio Issues

• No sound or low volume:
  1. Check the volume levels on both your device and the earbuds.
  2. Ensure the earbuds are properly seated in your ears.
  3. Verify that the earbuds are connected to the correct device.
• Sound cutting in and out:
  1. Move closer to your paired device to ensure you are within the effective range.
  2. Avoid environments with strong Wi-Fi or other wireless interference.
  3. Ensure the earbuds are fully charged.

7.3 Charging Issues

• Earbuds not charging in case:
  1. Ensure the charging pins on the earbuds and in the case are clean and free of debris.
  2. Verify the charging case itself has sufficient power.
• Charging case not charging:
  1. Try a different USB cable and power adapter.
  2. Ensure the charging port on the case is clean.

8. User Tips

• For optimal sound quality and noise cancellation, ensure you select the correct ear tips size for a snug fit.
• Regularly clean the ear tips and earbud grilles to prevent wax buildup, which can affect sound quality.
• When not in use, always store the earbuds in their charging case to protect them and keep them charged.

9. Warranty and Support

Your Touch TWS208 Wireless Earbuds are covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer.

For technical support or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.