1. Introduction
This Nasedal Airbrush compressor kit is an ultra-quiet miniature airbrush compressor kit, ideal for light-use, low-pressure applications with a working pressure of 4-25 psi. It is a multi-function dual-action airbrush with an auto stop & start compressor kit, suitable for nail art, makeup, model painting, cake decoration, tattoo art, and more. This kit can be used for both home DIY projects and industrial applications.
The kit is designed for global use and comes with a plug adapter suitable for your country. Weighing less than 1 kilogram (2.2 pounds), it is easy to transport. The integrated airbrush holder provides a safe and convenient place to rest your airbrush when not in use. The pressure switch button offers three air pressure settings, allowing you to subtly adjust the air pressure to the perfect amount. Featuring an auto start/stop function, the compressor activates according to the airbrush trigger's action, making it smarter and easier to use.
2. Specifications
| Product Name | Airbrush Compressor Kit |
|---|---|
| Material | Aluminum, Nylon, Plastic |
| Input Voltage | 110-230V |
| Output Voltage | 12V |
| Gas Flow (Max Airflow) | 12 LPM |
| Max Gas Pressure | 40 PSI (Adjustable 15-40 PSI) |
| Auto Start/Stop | Yes |
| Airbrush Pre-mounted Nozzle Diameter | 0.3mm / 0.01in |
| Airbrush Fluid Cup Capacity | 7cc |
| Diameter of Hose | 1/8" |
| Hose Length | 1.8m / 70.9in |
| Air Compressor Weight | 435g / 1.0lb |
| Air Compressor Size | 110x110x50mm / 4.3x4.3x2.0in |
3. Package Contents
The Nasedal Airbrush Kit typically includes the following items:
- 1 x Dual-Action 0.3mm Airbrush (NT-190)
- 1 x Air Compressor (NT-500A)
- 1 x Air Hose (1.8m / 70.9in)
- 1 x AC Transformer (Power Adapter)
- 1 x Mini Air Filter
- 1 x Dropper
- 1 x Mini Wrench
- 1 x Black Airbrush Holder
- 1 x Instruction Manual for Air Compressor
Depending on the specific kit variation (e.g., NT-99B-5 or NT-99B-5kit), additional items may include:
- 1 x Airbrush Needle Tool
- 5 x Airbrush Cleaning Needles
- 5 x Brushes
- 1 x Adjustable Fast Joint
- 1 x 0.2mm Nozzle and Needle with Nozzle Cap
- 1 x 0.5mm Nozzle and Needle with Nozzle Cap
- 15 x O-rings (5 for nozzle, 5 for nozzle cap, 5 for paint cup)
- 1 x 20cc Paint Cup
- 1 x 40cc Paint Cup

4. Setup Instructions
4.1. Initial Assembly
- Connect the Air Hose: Attach one end of the air hose to the airbrush and the other end to the air compressor's 1/8" hose interface.
- Insert Airbrush into Holder: Place the airbrush into the designated holder on the side of the compressor.
- Plug in the Adapter: Connect the AC transformer to the compressor's charging socket and then plug it into a power outlet.

4.2. Important Safety and Usage Notes
- The compressor should be placed in dry, clean, and well-ventilated areas.
- Keep the device out of reach of children.
- The compressor's ambient operating temperature should be within 0-40°C. Avoid direct sunlight (solarization).
- Do not let the compressor operate for more than 30 minutes if it is not assembled with the hose and airbrush.
- Always place the airbrush onto its holder when not in use to prevent damage.
5. Operating Instructions
5.1. Preparing for Spraying
- Dilute Paint: The airbrush is designed for liquid paint. Ensure your paint is properly diluted according to the paint manufacturer's instructions to achieve the desired consistency for spraying.
- Fill Fluid Cup: Pour the diluted paint into the airbrush's fluid cup. Do not overfill to prevent spills or blockage of ventilation holes.
- Initial Test: Before applying paint to your project, it is recommended to test the airbrush with water to familiarize yourself with its operation and ensure proper function.
5.2. Dual-Action Airbrush Operation
The Nasedal airbrush features a dual-action trigger for precise control over both air and paint flow:
- Air Flow Control: Press down on the main lever (trigger) to release air.
- Paint Flow Control: While holding the trigger down, pull it back to release paint. The further you pull back, the more paint will be released.
You can adjust the distance between the airbrush needle cap and the work surface to control the spray width. Closer distance results in a finer line, while a greater distance creates a wider spray pattern.

5.3. Adjusting Air Pressure
The compressor features a stepless air pressure control knob (OFF/ON) that allows you to adjust the air pressure between 15-40 PSI. Turn the knob clockwise to increase pressure (Max) and counter-clockwise to decrease pressure (Min).

6. Maintenance
Proper cleaning and maintenance are crucial for the longevity and optimal performance of your airbrush kit. Clean the airbrush immediately after every use to prevent clogging.
6.1. Simple Airbrush Cleaning (After Each Use / Color Change)
- Empty Fluid Cup: Empty any remaining paint from the fluid cup.
- Add Cleaner: Pour a small amount of airbrush cleaning solution or water into the fluid cup.
- Back-flush: With the airbrush working (air flowing), place your index finger over the airbrush nozzle to block airflow. This will cause air to bubble back into the fluid cup, loosening and dissolving leftover paint. Perform this for 8-15 seconds.
- Spray Clean: Spray the cleaning liquid into a waste container or spray water collection bottle (not included in the kit) until the spray is clear.

6.2. Thorough Needle & Nozzle Cleaning
If the airbrush becomes clogged or for a more thorough cleaning, follow these steps:
- Unscrew Handle: Carefully unscrew the airbrush handle (No. 16 in diagram on OCR page 2).
- Loosen Needle Chucking Nut: Loosen the needle chucking nut (No. 15).
- Remove Needle: Gently pull the needle (No. 5) out from the rear of the airbrush. Wipe any residual paint off the needle with a soft cloth dampened with cleaner.
- Unscrew Nozzle: Carefully unscrew the airbrush nozzle (No. 3).
- Clean Components: Use the provided cleaning needles or brushes to clean the paint passage, nozzle, and needle thoroughly. A reamer can be used to clean paint inside the nozzle.
- Reassemble: Reassemble the airbrush in reverse order. Ensure the needle follows the trigger action when re-inserting. Tighten the nozzle gently by hand (do not use a wrench to tighten the nozzle, as it may break).



7. Troubleshooting
7.1. Paint Bubbling in Fluid Cup, No Paint Sprays Out
Cause: This is generally caused by a loose nozzle cap or nozzle.
Solution:
- Check if the nozzle o-ring or the o-ring for the nozzle cap is missing.
- Carefully tighten the nozzle and nozzle cap. Do not use excessive force, as this can cause breakage.
- If an o-ring is missing, you can temporarily fix it by wrapping raw material tape around the connection. For long-term use, replace the o-ring or use a special sealant for airbrushes.
7.2. Only Air Sprays Out, No Paint
Cause: The paint concentration may be too high, affecting its fluidity and causing it to solidify quickly, or the middle of the lid might be blocked.
Solution:
- Ensure the paint is properly diluted to the correct consistency.
- Unscrew the airbrush handle and needle chucking nut. Pull the needle back out, then snap it back to its original position.
- Tighten the needle chucking nut lock nut.
- Check if the middle of the fluid cup lid is blocked. If so, use a needle to clear it.
7.3. Nozzle Breakage
Cause: The nozzle may break if overtightened with a wrench.
Solution: Always tighten the nozzle by hand. Use a wrench only for disassembling the nozzle if it's stuck.
7.4. Air Leak in Joints
Cause: Loose connections or damaged seals.
Solution: Check all connections, especially where the hose connects to the airbrush and compressor. Ensure they are securely tightened. Inspect O-rings for wear or damage and replace if necessary.
8. User Tips
- For delicate work, such as gingerbread decoration or fine model details, this airbrush provides a good spray pattern and comfortable handling.
- Many users find this kit excellent for model building due to its precision and ease of use.
- If you are new to airbrushing, practice with water first to get a feel for the controls and spray patterns before using paint.
- Always use special airbrush cleaning water for best results when cleaning the liquid cup and other components.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's specific policies or contact the Nasedal manufacturer directly. Keep your purchase receipt as proof of purchase.