Usongshine TB6600 Stepper Motor Driver Kit

Contents

Usongshine TB6600 Stepper Motor Driver Kit User Manual

Model: TB6600 Stepper Motor Driver Kit

1. Introduction

The Usongshine TB6600 Stepper Motor Driver is an upgraded professional two-phase stepper motor driver designed for 57/42 type two-phase hybrid stepping motors with a phase current below 4.0A. This driver offers precise control, low vibration, low noise, and high-speed operation, making it suitable for a wide range of automation equipment.

It features adjustable subdivision control (7 types: 1, 2/A, 2/B, 4, 8, 16, 32) via a 6-bit DIP switch and 8-level output current control (0.5A, 1.0A, 1.5A, 2.0A, 2.5A, 2.8A, 3.0A, 3.5A). This versatility allows it to be integrated into various applications such as engraving machines, marking machines, cutting machines, laser phototypesetting, plotters, CNC machine tools, crystal grinding machines, and automatic assembly equipment.

The kit typically includes four TB6600 stepper motor drivers and may include one breakout board, depending on the package. It is optimized for 57 and 42 stepper motors with a torque of 1.8N.m and below.

2. Product Features

  • Original brand new stepper motor driver chip for reliable performance.
  • Wide input voltage range: DC 9-42V (recommended 12-30V for optimal performance).
  • Control signal input voltage: 3.3-24V universal, eliminating the need for external series resistance.
  • Adjustable subdivision accuracy: 1 to 32 subdivisions selectable.
  • Output peak current: Up to 4.0A.
  • H-bridge bipolar constant current drive for efficient motor control.
  • High-speed optocoupler isolation for input signals, enhancing stability and safety.
  • Built-in temperature protection and overcurrent protection mechanisms.
  • Automatic half-flow function to reduce heat generation during idle periods.
  • Motor noise optimization function for quieter operation.
  • Large-area heat sink design for effective heat dissipation, suitable for high-temperature environments.
  • Input voltage anti-reverse protection.
  • Overheating, overcurrent short circuit protection.
  • Compact size for space-saving installations.

3. Specifications

Electrical Parameters

ParameterValue
Input VoltageDC 9-40V
Input CurrentRecommended 5A switching power supply
Output Current0.5-4.0A
Maximum Power Consumption160W
Subdivision Options1, 2/A, 2/B, 4, 8, 16, 32
Working Temperature-10 ~ 45 °C
Storage Temperature-40 ~ 70 °C
HumidityNo condensation, no water drops
Gas EnvironmentNo flammable gas and conductive dust

General Product Information

AttributeValue
ColorBlack
Power Supply TypeDC
Model NumberTB6600
Motor TypeStepper Motor
OriginMainland China
CertificationNone
CompatibilityNema17, Nema23 Motor, MACH3, 4 Axis Controller, CNC, CNC USB MACH3

Dimensions

Refer to the diagram below for the physical dimensions of the TB6600 Stepper Motor Driver.

TB6600 Stepper Motor Driver Dimensions: Top view 96mm width, 56.8mm depth. Back view 96.5mm width, 82.5mm depth, 4.5mm height, 13mm thickness. Side view 67.7mm height, 57mm depth.
Figure 3.1: TB6600 Stepper Motor Driver Dimensions. Top view: 96mm width, 56.8mm depth. Back view: 96.5mm width, 82.5mm depth, 4.5mm height, 13mm thickness. Side view: 67.7mm height, 57mm depth.

4. Setup and Installation

4.1 Component Overview

Four TB6600 stepper motor drivers and one red breakout board.
Figure 4.1: Overview of the TB6600 Stepper Motor Driver Kit, showing four drivers and one breakout board.
Detailed diagram of the TB6600 driver with labeled components, DIP switch functions (subdivision and current), and terminal connections.
Figure 4.2: Detailed view of the TB6600 Microstep Driver, highlighting the DIP switches (SW1-SW3 for Subdivision, SW4-SW6 for Current), PWR/ALARM indicator, control signal interface (ENA, DIR, PUL), motor interface (A+, A-, B+, B-), and power connector (VCC, GND).

4.2 Wiring Instructions

There are three types of input signals: PUL+ / PUL- (step pulse signal), DIR+ / DIR- (direction level signal), and ENA+ / ENA- (offline signal). There are two common connection methods for the input signal interface: Common Anode and Common Cathode connections. Users should choose the appropriate method based on their control system.

Common Anode Connection (Active Low)

Connect PUL+, DIR+, ENA+ to the power supply of the control system respectively. The pulse input signal is connected through CP-, the direction signal is connected through DIR-, and the enable signal is connected through EN-. Refer to the diagram below.

Wiring diagram for common anode connection (active low) and common cathode connection (active high) for the TB6600 driver. Common anode connects PUL+, DIR+, ENA+ to the control system's positive voltage, and PUL-, DIR-, ENA- to the control signals. Common cathode connects PUL-, DIR-, ENA- to the control system's ground, and PUL+, DIR+, ENA+ to the control signals.
Figure 4.3: Wiring Diagram. The left side shows the Common Anode connection (active low), where the positive terminals of the driver's control signals (ENA+, DIR+, PUL+) are connected to the control system's positive voltage, and the negative terminals (ENA-, DIR-, PUL-) receive the control signals. The right side shows the Common Cathode connection (active high), where the negative terminals of the driver's control signals (ENA-, DIR-, PUL-) are connected to the control system's ground, and the positive terminals (ENA+, DIR+, PUL+) receive the control signals.

Note: The EN terminal can be left unconnected. When EN is valid, the motor rotor is in a free state (off-line state). At this time, you can manually rotate the motor shaft to make adjustments that suit you. After the manual adjustment is completed, set EN to an invalid state to continue automatic control.

Common Cathode Connection (Active High)

Connect PUL-, DIR-, ENA- to the ground of the control system respectively. The pulse input signal is connected through PUL+, the direction signal is connected through DIR+, and the enable signal is connected through ENA+. If a current-limiting resistor is required, the connection method of the current-limiting resistor R is the same as the common anode connection. Refer to the diagram above (Figure 4.3).

Note: The control system common is +3.3V~+24V universal. No series resistance is required. The drive power is 9-42VDC.

4.3 Driver Case Disassembly/Assembly (Optional)

This video demonstrates how to safely disassemble and reassemble the TB6600 driver case, which may be useful for inspection or maintenance.

Video 4.1: Disassembly and reassembly of the TB6600 driver case using a screwdriver.

5. Operating Instructions

The TB6600 driver allows for precise control of stepper motors through its DIP switches for subdivision (microstepping) and current settings. The DIP switches are typically labeled SW1-SW6.

5.1 Subdivision (Microstep) Setting

The subdivision setting determines the number of microsteps per full step of the motor, influencing smoothness and resolution. Switches SW1, SW2, and SW3 control the subdivision. "ON" typically means the switch is in the down position. The step angle is calculated as: motor inherent step angle / number of subdivisions. For example, a stepper motor with an inherent step angle of 1.8° under 4 subdivisions has a step angle of 1.8°/4 = 0.45°.

Table showing DIP switch settings (SW1, SW2, SW3) for Microstep Subdivision. Options include NC, 1, 2/A, 2/B, 4, 8, 16, 32, with corresponding Pulse/revolution values.
Figure 5.1: Subdivision Setting Table. This table details how to configure DIP switches SW1, SW2, and SW3 to achieve different microstep resolutions (1, 2/A, 2/B, 4, 8, 16, 32) and their corresponding pulses per revolution.
SubdivisionPulse/revolutionSW1 StateSW2 StateSW3 State
NCNCONONON
1200ONONOFF
2/A400ONOFFON
2/B400OFFONON
4800ONOFFOFF
81600OFFONOFF
163200OFFOFFON
326400OFFOFFOFF

5.2 Current Setting

The output current of the driver can be adjusted using DIP switches SW4, SW5, and SW6. This allows you to match the current to your specific stepper motor requirements.

Table showing DIP switch settings (SW4, SW5, SW6) for Current (A). Options range from 0.5A to 4.0A.
Figure 5.2: Current Setting Table. This table details how to configure DIP switches SW4, SW5, and SW6 to set the output current from 0.5A to 4.0A.
Current (A)SW4 StateSW5 StateSW6 State
0.5ONONON
1.0ONOFFON
1.5ONONOFF
2.0ONOFFOFF
2.5OFFONON
2.8OFFOFFON
3.0OFFONOFF
3.5OFFOFFOFF

6. Maintenance

The TB6600 stepper motor driver is designed for durability and features a large-area heat sink for efficient thermal management. To ensure optimal performance and longevity:

  • Environmental Conditions: Operate the driver within the specified working temperature range of -10°C to 45°C and storage temperature of -40°C to 70°C. Ensure the environment has no condensation, water drops, flammable gases, or conductive dust.
  • Heat Dissipation: While the large heat sink is effective, ensure adequate airflow around the driver, especially in enclosed setups, to prevent overheating.
  • Connections: Periodically check all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to intermittent operation or damage.
  • Cleaning: Keep the driver free from dust and debris. Use a soft, dry brush or compressed air to gently clean the heat sink and circuit board if necessary. Avoid using liquids or solvents.

7. Troubleshooting

7.1 Common Issues and Solutions

  1. Issue: The power indicator light is on, but the motor does not rotate.

    Solution: If the wiring is correct but the motor still doesn't turn, it often indicates that the drive capacity of the control part is insufficient. This is common when using direct control from a microcontroller's I/O port. Ensure your control interface can provide at least 5mA drive capability.

  2. Issue: The motor's forward and reverse rotation is opposite to the desired direction.

    Solution: To reverse the motor's direction, simply interchange any two wires of one phase of the motor (e.g., swap A+ and A- or B+ and B-).

  3. Issue: Difficulty identifying the four wires of a stepper motor.

    Solution: Connect any two wires of the motor together. Then, manually twist the motor rotor. If you feel resistance, these two wires belong to the same phase (e.g., A+ and A-). Connect these to the driver's A+ and A- terminals. The remaining two wires will be the other phase (B+ and B-).

7.2 Control Signal Voltage

The upgraded TB6600 driver supports a universal control signal input voltage of 3.3-24V. Therefore, it is generally not necessary to add a series resistance if your control signal is higher than 5V.

8. User Tips

  • Reducing Motor Noise: If your stepper motors become noisy when idle, ensure the "Automatic half flow to reduce heat generation" feature is active. This function can also contribute to motor noise optimization. Adjusting the current settings (SW4-SW6) to match your motor's rated current precisely can also help reduce noise.
  • Initial Setup: For first-time users, it's recommended to start by connecting only the pulse signal (PUL) and setting the frequency within 1K. Set the subdivision to 16. The direction and offline signals can be left suspended initially. The motor should default to forward rotation after power-on. Once this basic operation is confirmed, gradually test acceleration (increasing frequency), direction, subdivision, and offline functions.

9. Support

For any questions, concerns, or technical assistance regarding your Usongshine TB6600 Stepper Motor Driver Kit, please contact the seller or manufacturer directly. We are committed to ensuring your satisfaction with our products.

If you encounter any issues with the product upon receipt, such as defects or incorrect items, please contact us within 5 days of receiving your order for assistance with replacement or resolution.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.