Introduction
Thank you for choosing the NEWBOLER Smart Bicycle Light Front LIG011. This manual provides essential information for the safe and efficient use of your new bicycle light. The LIG011 is a high-performance bicycle light featuring a 10000mAh battery, 6000 lumens brightness, smart light sensing, and a durable aluminum alloy body. It also functions as a power bank for your devices.
Safety Precautions
- The bicycle light generates heat during use, which is normal. If the temperature becomes too high, discontinue use until it cools down.
- If the bicycle light is not used for an extended period, charge it every three months to maintain battery health.
- Do not shine the light directly into eyes. Keep away from flammable and explosive objects.
- The waterproof rating is IPX6. Do not immerse the bicycle light in water.
- Properly place the bicycle light on your handlebar. Keep out of children's reach to avoid accidents.
Key Features
- Double High Power Beads LED for maximum illumination.
- Intelligent sensing: Automatic brightness adjustment based on ambient light conditions.
- Functions as a power bank for charging other devices.
- Power display to show remaining battery life.
- Charging indication light for charging status.
- Durable aluminum alloy heat dissipation shell.
- USB Rechargeable with built-in large capacity battery.
- Automatic power off after charging is complete.
- High brightness with low energy consumption.
Specifications
| Feature | Specification (LIG011) |
|---|---|
| Model | LIG011 |
| LED | High Power Beads x2 (L2 LED x2) |
| Lumens | 6000LM |
| Battery Capacity | 10000mAh |
| Material | Aluminum alloy |
| Weight | 339g |
| Size | 121*51*31 mm |
| Irradiation Distance / Range | About 200-300m |
| Work Time | 3-18 hours (depending on mode) |
| Lighting Modes | 5 modes (Super Bright Single, Bright Full, Low, Flash, Smart) |
| Charge Time | About 9 hours |
| Waterproof Level | IPX6 |
| Power Bank Function | Yes |
| Mounting Placement | Handlebar (22.8~31.8 mm) |
| Certification | CE |
Installation
The LIG011 bicycle light offers tool-free quick installation and removal.
- Attach the Base: First, fix the mounting base to your bicycle handlebar using the provided screws.
- Mount the Light: Align the main body of the headlight with the slot of the base and push it back until it is securely stuck.
- Remove the Light: When removing, press down on the clip first, then pull the light forward to detach it from the base.
Operation
To turn on the light, press and hold the power button for more than 3 seconds. A quick click will not turn on the light.
Light Modes:
- First Mode: Single lamp bead 100% power.
- Second Mode (Smart Mode): Double lamp bead automatic adjustment mode. In this mode, it enters highlight mode for 40 seconds, then transitions to automatic mode. It will automatically dim in bright light and brighten in dark environments.
- Third Mode: Single lamp bead 60% power.
- Fourth Mode: Strobe.
- Highest Brightness Mode: Quickly press the switch twice in any mode to enter the highest brightness mode. Note that in this mode, the heat generated is significant, so use it while riding to ensure proper cooling.
Smart Light Sensor:
The built-in light sensing chip automatically adjusts the brightness according to the intensity of the riding environment light, effectively saving power. Bright environments reduce brightness, while dark environments increase brightness.
Battery and Charging Indicator:
When charging, the four blue lights will breathe. Once fully charged, all four blue lights will remain steadily on. The power display shows 25%, 50%, 75%, and 100% battery levels.
Product Demonstration Video:
Maintenance
- Always use the charging cable included in the package to charge the device. Using other cables may cause damage.
- Clean the light with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Store the light in a cool, dry place when not in use.
- Ensure the USB port cover is securely closed to maintain water resistance.
Troubleshooting
- Light does not turn on:
- Ensure the power button is pressed and held for more than 3 seconds. Check if the battery is charged.
- Light not charging:
- Verify that you are using the original charging cable. Check the charging indicator lights. If the issue persists, try a different USB power source.
- Mounting bracket broke:
- The mounting bracket is designed for secure attachment. If it breaks, contact customer support for replacement options. Ensure proper installation to avoid excessive force.
- Light output seems low:
- Check the current light mode. If in Smart Mode, it may automatically dim in bright environments. Switch to a higher brightness mode if needed. Ensure the lens is clean.
User Tips
- Remember to long-press the power button (3+ seconds) to turn the light ON or OFF. A quick press cycles through modes.
- If you experience issues with the mounting bracket, ensure it is installed correctly and not overtightened. Many users have reported issues with the bracket, so handle with care.
- The light is equipped with a Micro USB charging port. Ensure your charging cable is compatible.
- While the light has a power bank function, using it while the light is on may affect battery life for illumination.
- The product does not include a horn/speaker function, despite some visual elements in older descriptions.
Warranty and Support
For warranty information or technical support, please refer to the official NEWBOLER website or contact your retailer. Keep your proof of purchase for any warranty claims.
A detailed user manual in PDF format is available for download from the seller's product page or by contacting customer support.