BAOFENG Programming Cable

Contents

Baofeng Programming Cable User Manual

Model: Programming Cable

1. Introduction

This manual provides instructions for the Baofeng Programming Cable, designed to facilitate programming of various Baofeng, Kenwood, Quansheng, and TYT two-way radios. The cable allows users to connect their radio to a computer for channel management, frequency settings, and other customizable features using compatible programming software.

Video: Overview of the Baofeng Programming Cable and its connectors.

2. Compatibility

The Baofeng Programming Cable is compatible with a wide range of two-way radios. Please refer to the list below to ensure your radio model is supported.

Baofeng Programming Cable with a list of compatible radio models

Image: Baofeng Programming Cable and a visual list of compatible radio models.

2.1. Baofeng / Pofung Radios

  • UV-18i / UV-18H / UV-18 Pro / UV-18Pro Max / UV-18 / UV-18PRO / G28
  • UV-5RH / UV-5RH Pro / UV-5RH Pro Max / UV-5RM
  • UV-25L / UV25 Pro Max / AR-152
  • BF-K5 Plus / BF-K5 Pro Max / UV-K5M / UV-K5 Plus
  • DMR DM-1701 / DM-1801 / DR-1801
  • UV-5R / UV-82 / BF-888S
  • UV-16 / UV-16 Pro / UV-16 PRO V2 / UV-16 Plus / UV-16 Max / UV-16 Max V2
  • UV-13 / UV-13 Pro / UV-13 Pro V1 / UV-13 Pro V2
  • UV-S9 Plus / UV-S9 / UV-5R+Plus
  • UV-17 / UV-17 Plus / UV-17 Pro / UV-17 Pro V1 / UV-17 Pro V2 / UV-17 Pro V1 V2
  • UV-17 Max / UV-17 Max V1 / UV-17 Max V2
  • UV-10 / UV-20 / UV-30
  • BF-888s / BF-666s / BF-777s / BF-999 / BF-888 / BF-777 / BF-658 / BF-668 / BF-530 / BF-520 / BF-658
  • BF-UV8R / UV-8R
  • P15UV / UV15 Pro Max / UV15 Pro Max V2 / UV-999 / UV-999 Pro Max
  • BF-1802, UV-20, UV-21 / UV-18 Pro / UV-5RH
  • DM-1701 / DM-1702 / DM-1801 / DR-1801
  • UV-10 / UV-10R
  • UV-A52 / UV-82 / UV-8 / UV-6 / UV-5R / 888s / 5RA
  • BF-F8 / BF-F8HP / UV-5R / UV5RA / UV5RC / UV5RD / UV5RE / UV5RE+ / UV-6R
  • UV-82 UV-82L UV-82C UV-89 UV-8D UV-82HP UV-82HPL UV-82HX UV-82X GMRS-V1 GMRS-V2 MURS-V1 MURS-V2 MK3/5 UV-8R UV-98D UV-Q5 UV-82RT UV8/UVB5/UVB6/A52 /F8/F8+
  • BF-888S / 777 / 666s / 777s / BF-88E / F8+ / A5 / 388A / BF-480 / 490 / 320 / V6 / V7 / V8 / 658 / 520 / 530 / 999
  • UV5R / UV5RA / UV5RB / UV5RC / UV5RE / UV5RA+ / UV5R+ / BF-F8 / BF-F8HP / GT-5R / BF-F9 / V2N / UV-5X3 / UV3R+ / UV5 / UV6 / V85 / B5 / B6 / BF-K5 / BF-480 / BF-490 / BF-320 / BF-V6 / BF-V8

2.2. Kenwood Radios

  • TK-240, TK-250, TK-255, TK-260, TK-260G, TK-270, TK-270G, TK-272G, TK-278, TK-278G
  • TK-340, TK-349, TK-350, TK-353, TK-360, TK-360G, TK-370, TK-370G, TK-373G, TK-378, TK-378G
  • TK-430, TK-431, TK-715
  • TK-2100, TK-2102, TK-2107, TK-2118, TK-2160
  • TK-3100, TK-3101, TK-3102, TK-3107, TK-3118, TK-3160

2.3. Quansheng Radios

  • UV-K5, UV-K6, UV-5R PLUS, UV-K58, TG-UV2PLUS

2.4. TYT Radios

  • TYT UV-8000D / MD UV-380 / MD UV-390

3. Setup Guide

Follow these steps to set up your programming cable and prepare your radio for programming.

  1. Install CD Driver: Insert the provided CD into your computer's CD-ROM drive. Follow the on-screen instructions to install the necessary USB drivers. The driver supports Windows 10.
  2. Install Programming Software: Install the appropriate programming software for your specific radio model. Free software for Baofeng UV-5R radios is often available (inquire for more details if needed).
  3. Connect Cable to Computer: Plug the USB end of the programming cable into an available USB port on your computer.
  4. Connect Cable to Radio: Ensure your radio is turned off. Connect the two-pin connector of the programming cable to the accessory port on your radio. This cable features a RIBLESS design, meaning no additional Radio Interface Box (RIB) is required.
  5. Power On Radio: Turn on your radio.
  6. Launch Software: Open the programming software on your computer.
USB Programming Cable and CD Driver

Image: The USB Programming Cable and its accompanying CD Driver.

USB Programming Cable connected to a Baofeng radio

Image: The USB Programming Cable connected to a Baofeng radio, demonstrating proper connection.

4. Operating Instructions

Once the cable and software are set up, you can begin programming your radio.

  1. Select COM Port: In the programming software, navigate to the settings or options menu and select the correct COM port that corresponds to your USB programming cable. This is usually found under a 'Port' or 'Communications' setting.
  2. Read Data from Radio: Before making any changes, it is highly recommended to read the current configuration from your radio. This creates a backup of your radio's settings. Look for an option like "Read from Radio" or "Download from Radio" in the software.
  3. Modify Settings: Adjust frequencies, channel names, squelch levels, and other parameters as desired within the software interface.
  4. Write Data to Radio: After making your desired changes, save the configuration in the software. Then, use the "Write to Radio" or "Upload to Radio" function to transfer the new settings to your device. Ensure the radio remains connected and powered on during this process.
  5. Verify Changes: Once programming is complete, disconnect the cable and test your radio to ensure the new settings are applied correctly.

5. Maintenance

  • Storage: Store the programming cable in a cool, dry place away from direct sunlight and extreme temperatures.
  • Handling: Avoid sharp bends or kinks in the cable, as this can damage the internal wiring. Do not pull the cable by the wire; always grasp the connectors.
  • Cleaning: If necessary, gently wipe the cable and connectors with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
  • Software Updates: Periodically check for updates to your radio's programming software and cable drivers to ensure optimal performance and compatibility with new operating systems or radio firmware.

6. Troubleshooting

If you encounter issues while using the programming cable, consider the following:

  • Cable Not Detected: Ensure the USB cable is firmly plugged into both the computer and the radio. Try a different USB port on your computer.
  • Driver Issues: Verify that the correct drivers are installed. You may need to uninstall old drivers and reinstall the ones from the provided CD or the manufacturer's website.
  • Software Not Connecting: Double-check that you have selected the correct COM port in your programming software. The COM port number can usually be found in your computer's Device Manager (under 'Ports (COM & LPT)').
  • Compatibility Problems: Confirm that your radio model is explicitly listed as compatible with this cable and the programming software you are using. Some radio models, even within the same series (e.g., UV-5RH Pro vs. UV-5RH Pro Max), may require specific software versions or cables.
  • Radio Not Responding: Ensure the radio is powered on and fully charged. Try turning the radio off and on again after connecting the cable.
  • Programming Errors: If you receive an error during the read/write process, ensure no other applications are interfering with the COM port. Close other programs and try again.

7. Specifications

AttributeValue
Brand NameBAOFENG
Model NumberBaofeng Programming Cable
Item TypeCable
OriginMainland China
ColorBlack
Compatible WithBaofeng/Kenwood/Quansheng Radio (See Compatibility section for full list)
High-concerned chemicalNone
Package Contents1x USB Programming Cable, 1x CD Driver (or 2x each for multi-pack)

Note: All specifications are subject to change without notice.

8. User Tips

  • Verify Radio Model: Always double-check the exact model of your radio against the compatibility list. Minor variations in model numbers (e.g., "Pro" vs. "Pro Max") can sometimes affect cable or software compatibility.
  • Software Source: For the best results, download the latest programming software directly from the radio manufacturer's official website if available, rather than relying solely on the included CD, as software can be updated frequently.
  • Run as Administrator: When installing drivers or running programming software on Windows, right-click the installer/executable and select "Run as administrator" to prevent permission-related issues.
  • One Cable at a Time: If you have multiple programming cables, connect and install drivers for one at a time to avoid COM port conflicts.

9. Warranty and Support

This programming cable, as an accessory, typically comes with a three-month warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For any technical assistance or inquiries regarding the programming cable, please contact the seller. Life-time free technical support is often provided, and queries are typically responded to within 24 hours.

Technical Assistance banner

Image: Banner indicating availability of technical assistance.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.