Tuya Body Analysis Smart Scale

Contents

Tuya Smart Home Body Analysis Smart Scale Instruction Manual

Model: Body Analysis Smart Scale

Introduction

This manual provides instructions for the effective and safe use of your Tuya Smart Home Body Analysis Smart Scale. Please read it carefully before operation and keep it for future reference. This smart scale is designed to measure various body composition metrics and integrate with the Tuya Smart Life app for comprehensive health tracking.

Note: The following functions can be measured only when stepping on the scale barefoot (without shoes).

Tuya Smart Scale displaying various body metrics and connected to a smartphone app
The smart scale measures various body composition metrics and integrates with the Tuya Smart Life app.

Specifications

FeatureDetail
Product Dimensions260 x 260 mm (10.23 x 10.23 inches)
Glass Thickness0.15 inches
LCD Display74 x 28 mm
Weight UnitsKG / LB / ST
Measurement Range0.5 kg - 180 kg (1 lb - 400 lb)
Power Supply2x AAA Batteries (not included)
Operating Temperature10-35 °C
Operating Humidity20-90% RH
Supported OSiOS 8.0 or higher, Android 6.0 or higher
Smart Home PlatformTuya
CertificationCE, FCC, RoHS

The scale surface is made of building-grade tempered glass, providing good impact resistance and high pressure resistance for stable and reliable measurements.

Dimensions of the smart scale, 26cm by 26cm
Physical dimensions of the smart scale.
Diagram showing tempered glass thickness and weight support
High-strength tempered glass construction details.

Safety Instructions

  • The product is safe for use by children aged 10 and above, and by persons with reduced physical or mental capabilities, or lack of experience or knowledge, but only under adult supervision and with awareness of potential hazards.
  • Maintenance should be performed by or under the supervision of an adult.
  • Before use, inspect the device and its parts. Do not use if damaged.
  • Do not use to diagnose or treat any medical conditions.
  • Do not use with medical implants such as pacemakers.
  • Ensure the scale and your feet are dry before stepping on the scale to avoid slipping.
  • Do not stand on the edge of the scale or jump on it.
  • Do not overload the scale (maximum 180 kg / 400 lb).
  • Place the product on a hard, flat surface.
  • Do not drop the scale or drop objects on it, as this may damage the sensors.
  • Do not immerse in water.
  • Not recommended for pregnant women.
  • Not recommended for infants, toddlers, and children under 10 years of age.
  • Do not attempt to repair, disassemble, or alter the product yourself.

Note: Any measurement obtained using this device is for reference only and should not be considered a medical opinion. Consult your GP or specialist before making changes to your diet, exercise plan, or physical activities. To ensure the most accurate results, take your measurements at the same time of the day and under similar circumstances.

Setup

Initial Setup

  1. Insert 2x AAA batteries into the battery compartment at the back of the scale.
  2. Place the scale on a hard, flat surface to ensure accurate readings.
  3. If needed, locate the KG/LB switch on the bottom of the scale to select your preferred unit.
    Bottom view of the smart scale showing the KG/LB unit switch button
    Click the button on the bottom to switch between KG/LB units.

App Installation and Pairing (Tuya Smart Life App)

  1. Download the "Tuya Smart Life" app from the App Store (iOS) or Google Play (Android), or scan the QR code below.
    QR code for Tuya Smart Life app download
    Scan to download the Tuya Smart Life app.
  2. Log in with an existing account or create a new one.
  3. Turn on Bluetooth on your smartphone to enter pairing mode.
  4. Open the Tuya Smart Life app. Click "Add Device" or the plus icon (+) in the top right corner on the Home page. The smart scale should be found automatically; if not, you can add it manually.
  5. Once the scale is added, select your preferred weight and height units within the app.
  6. Enter your personal data (gender, birthday, height, target weight) in the profile and press OK. Ensure this information is accurate for correct body fat calculations.
Video guide for connecting the smart scale to the Tuya Smart Life app and setting up your profile.

Operation

  1. Place the scale on a hard, flat surface.
  2. Step on the scale barefoot for thorough measurements and full analysis. Ensure your feet touch all four metal sensors.
  3. After your weight has been locked, all body composition data can be read in the Tuya App by opening the drop-down menu 'Body Mass Index'.

Note: When stepping on the scale with socks on, only weight and BMI will be measured and displayed on the main page.

Person standing barefoot on the smart scale, with the app displaying detailed body composition data
Using the smart scale barefoot to obtain full body composition data.
Close-up of feet on the smart scale, showing the digital display
Ensure feet make contact with all four metal sensors for accurate readings.

Maintenance

  • If necessary, clean the scale with a slightly damp towel and wipe it dry with a soft cloth.
  • You can use cleaning alcohol to clean the sensors. Do not use it on other parts of the unit.
  • Store the scale in a dry, cool place away from direct sunlight.

Troubleshooting

Common Issues and Solutions:

  • Bluetooth connection failed:
    • Make sure the scale and Bluetooth are on.
    • Check your smartphone's system version (iOS 8.0+ / Android 6.0+).
    • Try adding the smart scale manually in EZ mode (Wi-Fi) or AP mode (hotspot).
  • Scale is not measuring body fat data:
    • You must be barefoot to measure body fat. Ensure your feet and the scale are both dry.
    • Stand on the scale for about 10 seconds until the number on the display stops flashing.
    • Verify Bluetooth is turned on.
    • Check if Bluetooth is paired with a different scale.
  • Scale gives inconsistent measurements:
    • Check if the scale is placed on a hard, flat surface.
    • Ensure nothing is stuck to the bottom.
    • Reinsert the batteries to restart the scale.
  • App displays an incorrect body fat rate:
    • The body parameter settings might be incorrect. Double-check that you entered the correct gender, height, and age in your profile.
  • How to re-calibrate the scale (after moving it or changing the batteries):
    • Step on the scale to activate it. Let it drop to 0.0 kg automatically to calibrate it.
    • Alternatively, remove one of the batteries, place it back, and wait for the scale to restart automatically.
  • Scale does not turn on:
    • Remove the batteries and place them back. Make sure to insert the batteries as directed.
    • Check if the batteries are depleted.
  • How to change units:
    • You can change units via the Tuya app. The scale will then show the same unit as the app.

Error Indications:

  • LO: The battery power is running low. Replace the batteries.
  • OL: The scale is overloaded (max 180 kg / 400 lb). Place less weight onto the scale.
  • EER: An error occurred during measurement. Step off the scale for 5 seconds and step back on to measure again.

User Tips

  • For consistent and accurate readings, try to weigh yourself at the same time each day, preferably in the morning before breakfast and after using the restroom.
  • Ensure the scale is on a hard, flat surface, not carpet, for the most accurate weight and body composition measurements.
  • To get the most accurate body composition data, ensure your feet are clean, dry, and make full contact with all four metal sensors on the scale.
  • If you are under 18 years of age, body fat calculations may have large errors. Pregnant women should also use body fat measurements with caution.
  • For optimal results, drink cold water when rising in the morning (ensure the amount of water and its temperature are the same each day) and wait 30 minutes before performing the analysis with bare feet on the scale.

Warranty and Support

This product comes with guarantees that cannot be excluded under consumer law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

The manufacturer will repair or replace such defective goods for up to 1 year from the date of purchase. This warranty is against defects in the goods purchased and does not cover damage caused by incorrect use or installation, modifications, or accidents. To claim under the warranty, you need to return the product to the place of purchase (at your expense) with a valid receipt or other proof of purchase. If you are unable to return the product to the place of purchase, please contact support@ifisource.com or call the customer service hotline: +61 1300522523 (Mon. - Fri. 9am - 5pm AEST).

This limited warranty applies only to products purchased within the territory of Australia.

For additional information or to view the full user manual, please refer to the PDF document: User Manual (PDF).


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.