1. Introduction
The HORACO 6 Port Gigabit Industrial Switch (Model ZX500-SWG10411S) is a high-performance, industrial-grade network device designed for robust and reliable data transmission in demanding environments. Featuring 4 Gigabit RJ45 ports, 1 Gigabit Uplink port, and 1 Gigabit SFP optical port, this switch supports 10/100/1000Mbps transmission rates. It incorporates advanced features such as VLAN support, Extend mode for long-distance transmission, 4KV lightning protection, and IP30 protection, making it suitable for various industrial and security monitoring applications.
2. Safety Information
Please read and understand all safety instructions before installing or operating this device. Failure to do so may result in injury or damage to the equipment.
- Ensure the power supply voltage is within the specified range (DC12-55V) to prevent damage.
- Do not expose the device to water or excessive moisture.
- Avoid placing the device in areas with extreme temperatures or high humidity. The operating temperature range is -40°C to 75°C.
- Do not open the device casing. Refer all servicing to qualified personnel.
- Ensure proper grounding to utilize the 4KV lightning protection effectively.
- Disconnect power before performing any installation or maintenance.
3. Product Overview
3.1 Key Features
- 6 Gigabit Ports: 4* 1000M RJ45 Ports, 1* Gigabit Uplink Port, 1* Gigabit SFP Optical Port.
- VLAN Support: One-click VLAN to prevent network storms and enhance network stability.
- Extend Mode: Supports long-distance transmission up to 250 meters, breaking the traditional 100-meter limit.
- Industrial Grade Design: Built with high-performance industrial chips for strong data processing, stability, and low failure rate.
- Robust Protection: IP30 metal casing for dust protection, fanless design for efficient heat dissipation, and 4KV lightning protection (8KV anti-static, EMC4 level standard).
- Wide Temperature Range: Operates reliably in extreme conditions from -40°C to 75°C.
- Multiple Installation Methods: Supports DIN Rail and Wall Mounted installations.
- Triple Redundant Power Inputs: Flexible power options including Industrial Terminal Access and DC2.1 Access for various scenarios.
3.2 Package Contents
The package typically includes:
- 1 x HORACO 6 Port Gigabit Industrial Switch
- 1 x Instruction Manual
- 1 x Certificate of Conformity
- 1 x Warranty Card
- 1 Pair x Hanging Ears (for wall mounting)
3.3 Port Definitions
The switch features the following ports and indicators:
- Ports 1-4: 10/100/1000Mbps RJ45 Ethernet Ports.
- Port 5: Gigabit Uplink RJ45 Port.
- Port 6: Gigabit SFP Optical Port.
- PWR LED: Power indicator.
- V/D/E DIP Switches: Configuration switches for VLAN, Default, and Extend modes.
- Industrial Terminal Block: For DC12-55V power input (Redundant V1+, V1-, V2+, V2-).
- DC 2.1 Power Input: Alternative DC power input.
4. Setup
4.1 Installation Methods
The switch supports two primary installation methods:
- DIN Rail Installation: Attach the switch to a standard DIN rail using the integrated clip on the back.
- Wall Mounted Installation: Use the provided hanging ears to securely mount the switch to a wall or panel.
4.2 Power Connection
The switch requires a DC12-55V power input. It offers redundant power input options for enhanced reliability:
- Industrial Terminal Access: Connect your DC power source to the 4-pin industrial terminal block (V1+, V1-, V2+, V2-). This is suitable for industrial power supplies.
- DC2.1 Access: Alternatively, use a standard DC2.1 power adapter.
Ensure the power source is stable and within the specified voltage range. Once connected, the PWR LED should illuminate.
4.3 Network Connection
Connect your network devices (e.g., IP cameras, IP phones, video recorders, PCs) to the RJ45 ports (1-5) using standard Ethernet cables. For fiber optic connections, insert an SFP module into Port 6 and connect your fiber cable.
5. Operating Instructions
The switch features DIP switches on the front panel to configure its operating mode:
- VLAN Mode: When enabled, different VLANs cannot communicate directly with each other. This helps prevent broadcast storms and improves network performance, especially in surveillance systems.
- Extend Mode: This mode allows for long-distance data transmission up to 250 meters, exceeding the standard 100-meter Ethernet limit. It is ideal for extending network reach to remote devices like IP cameras.
- Standard Mode (Default): All ports operate as a standard switch, allowing full communication between all connected devices.
To change modes, adjust the V/D/E DIP switches according to your network requirements. Ensure the switch is powered off before changing DIP switch settings, then power it back on for the changes to take effect.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the switch. Do not use liquid or aerosol cleaners.
- Environment: Ensure the operating environment remains within the specified temperature and humidity ranges.
- Cable Management: Keep network cables organized and free from kinks or excessive bends to maintain optimal performance.
- Firmware Updates: Check the manufacturer's website periodically for any available firmware updates to ensure optimal performance and security.
7. Troubleshooting
- No Power: Check the power connection and ensure the power supply is functioning correctly. Verify the PWR LED is on.
- No Link/Activity: Ensure Ethernet cables are securely connected to both the switch and the network device. Check the link/activity LEDs on the ports. Try a different cable or port.
- Network Performance Issues: Verify that the correct operating mode (VLAN, Extend, Standard) is selected via the DIP switches. Check for broadcast storms or network loops.
- Device Not Recognized: Ensure the connected device is powered on and its network settings are correct.
- SFP Module Issues: Ensure the SFP module is correctly inserted and compatible with the switch and the connected fiber optic cable.
8. Specifications
| Attribute | Value |
|---|---|
| Product Name | 6 Port Gigabit Industrial Ethernet Switch |
| Product Model | ZX500-SWG10411S |
| Brand Name | HORACO |
| Switch Type | Gigabit Switch |
| Number of Interfaces | 6 |
| Port Definition | 4* 1000M RJ45 Ports, 1* Gigabit Uplink Ports, 1* Gigabit SFP Ports |
| Transmission Rate | 10/100/1000Mbps |
| Switch Capacity | 12Gbps |
| Packet Forwarding Rate | 8.928Mpps |
| MAC Address Table Size | 1K |
| Jumbo Frame | 9.6Kbytes |
| Transfer Mode | Store and Forward |
| Communication Mode | Full-Duplex & Half-Duplex |
| VLAN Support | YES |
| Function | VLAN Support, Extend Mode |
| Power Input | DC12-55V (4-PIN Industrial Terminals, DC 2.1) |
| Network Protocols | IEEE802.3, IEEE802.3i, IEEE802.3u, IEEE802.3ab, IEEE802.3z |
| Network Media | 10BASE-T: Cat5 or more UTP (≤100 m) 100BASE-TX: Cat5 or more UTP (≤100 m) 1000BASE-TX: Cat5 or more UTP (≤100 m) |
| Working Temperature | -40°C to 75°C |
| Storage Temperature | -40°C to 85°C |
| Working Humidity | 10%~90% (non-condensing) |
| Storage Humidity | 5%~95% (non-condensing) |
| Protection | IP30, 4KV Lightning Protection, 8KV Anti-static, EMC4 |
| Product Dimensions | 120mm x 87mm x 30mm |
| Certification | CE, FCC, RoHS |
9. Warranty and Support
HORACO provides a 2-year free warranty for this product. Additionally, customers are entitled to lifetime professional technical support. For any technical assistance or warranty claims, please contact HORACO customer service.