Haier 0010401715HC

Contents

Haier AC Remote Control User Manual

Model: 0010401715HC / V9014557

1. Product Overview

This manual provides instructions for the 0010401715HC / V9014557 remote control, designed for use with compatible Haier air conditioners. This remote specifically supports cooling functions.

Remote Control Layout

Front view of the Haier AC remote control with all buttons and LCD screen visible.

Figure 1: Front view of the remote control

The remote control features an LCD display and various buttons for controlling your air conditioner's functions.

2. Setup

2.1 Battery Installation

  1. Locate the battery compartment on the back of the remote control.
  2. Slide the battery cover downwards to open it.
  3. Insert two AAA batteries (not included), ensuring the positive (+) and negative (-) terminals match the markings inside the compartment.
  4. Slide the battery cover back into place until it clicks securely.
Back view of the remote control, showing the battery compartment cover.

Figure 2: Back view with battery compartment

2.2 Initial Use

Once batteries are installed, the remote control is ready for use. Point the remote directly at the indoor unit of your Haier air conditioner. No pairing is typically required for this type of infrared (IR) remote control.

3. Operating Instructions

The remote control features several buttons to manage your Haier AC unit. Refer to Figure 1 for button locations.

  • POWER Button (Green): Turns the air conditioner ON or OFF.
  • TURBO/QUIET: Toggles between Turbo mode for rapid cooling and Quiet mode for reduced noise operation.
  • COOL: Activates the cooling mode. This remote is designed for cooling functions only.
  • SELF CLEAN: Initiates the self-cleaning function of the indoor unit (if supported by your AC model).
  • ECO: Activates energy-saving mode.
  • TEMP ▲ / ▼: Adjusts the desired temperature setting upwards or downwards.
  • SWING (Left/Right): Controls the horizontal airflow direction.
  • SWING (Up/Down): Controls the vertical airflow direction.
  • DRY: Activates dehumidification mode.
  • SLEEP: Activates sleep mode for comfortable nighttime operation.
  • EXTRA FUNCTION: May activate additional features depending on your specific AC model.
  • TIME ON / TIME OFF: Sets a timer for the unit to turn ON or OFF automatically. Use with CONFIRM/CANCEL buttons.
  • LOCK: Locks the remote control buttons to prevent accidental changes. Press again to unlock.
  • LIGHT: Turns the display light of the remote control ON or OFF.
  • RESET: Resets the remote control to factory default settings. Use a pointed object to press this button.
  • CONFIRM / CANCEL: Used to confirm or cancel timer settings and other functions.

4. Maintenance

4.1 Battery Replacement

Replace batteries when the remote control's display becomes dim or when the remote no longer operates the AC unit reliably. Always replace both batteries at the same time with new AAA batteries.

4.2 Cleaning

Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners, abrasive materials, or chemical solvents, as these can damage the remote's surface or internal components.

4.3 Storage

If the remote control will not be used for an extended period, remove the batteries to prevent leakage and corrosion.

5. Troubleshooting

  • Remote not responding:
    • Check if the batteries are correctly inserted and have sufficient power. Replace if necessary.
    • Ensure there is a clear line of sight between the remote control and the air conditioner's receiver. Obstructions can block the infrared signal.
    • Make sure the remote is pointed directly at the AC unit.
  • AC unit not responding to specific functions:
    • Verify that your specific Haier AC model supports the function you are trying to use (e.g., Self Clean, Extra Function).
    • If the remote is locked, press the LOCK button again to unlock it.
  • Remote display is blank or dim:
    • Replace the batteries with new ones.

6. Specifications

FeatureSpecification
Model Number0010401715HC / V9014557
Brand (Remote Manufacturer)XingZhiHua
Compatible AC BrandHaier
Wireless CommunicationInfrared (IR)
Frequency433 MHz
Channel3
UseAir Conditioner
Supported FunctionsCooling only
OriginMainland China
CertificationCE
Power Source2 x AAA Batteries (not included)

7. User Tips

  • Compatibility Check: Before purchasing or using, ensure this remote control is compatible with your specific Haier AC model. Some users have inquired about compatibility with models like HSU-09HV03/R2.
  • Line of Sight: For optimal performance, always ensure a direct and unobstructed line of sight between the remote control's infrared emitter and the AC unit's receiver.
  • Battery Quality: Use high-quality AAA batteries for longer life and consistent performance.

8. Warranty and Support

For warranty information or technical support, please refer to the documentation provided with your original Haier air conditioner unit or contact the seller/manufacturer of the remote control directly. Keep your purchase receipt for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.