Introduction
This manual provides essential information for the safe and efficient operation of your T&G TG656 Portable Bluetooth Speaker. Please read it thoroughly before using the device and retain it for future reference.

Setup
1. Initial Charging
Before first use, fully charge the speaker. Connect the speaker to a 5V/1000mA USB power source using the provided charging cable. The charging port is located at the rear of the device.

2. Power On/Off
Press and hold the Power/Mode button (usually indicated by a power symbol or 'M') for a few seconds to turn the speaker ON or OFF.

3. Bluetooth Pairing
- Ensure the speaker is powered on and in Bluetooth mode (short press the Power/Mode button to cycle modes until you hear a Bluetooth prompt).
- On your mobile device, enable Bluetooth and search for available devices.
- Select "TG656" from the list of devices.
- Once paired, the speaker will indicate a successful connection, and you can begin playing audio.
4. True Wireless Stereo (TWS) Pairing
To pair two TG656 speakers for TWS stereo sound:
- Ensure both speakers are powered on and not paired with any mobile device.
- In Bluetooth Mode, without pairing, press the "Play/Pause" key for 4 seconds on either speaker until you hear a hint and the button light stops flashing. This speaker is now in TWS pairing mode.
- The two speakers will automatically connect to each other.
- Once TWS paired, connect your mobile phone to one of the speakers via Bluetooth as described in step 3.
5. Other Audio Inputs
- TF Card: Insert a TF (MicroSD) card into the TF card slot. The speaker will automatically switch to TF card mode and begin playback.
- USB Playback: Insert a USB flash drive into the USB playback port. The speaker will automatically switch to USB mode and begin playback.
- AUX Input: Connect an audio device using a 3.5mm AUX cable to the AUX Play port. Short press the Power/Mode button to switch to "Line In" mode.
Operating Instructions
Refer to the button diagram in the Setup section for button locations.
- Power On/Off: Long press the Power/Mode button.
- Mode Switch: Short press the Power/Mode button to cycle through USB, TF card, Bluetooth (BT), and FM radio modes. For AUX input, ensure the cable is connected, then switch to "Line In" mode.
- Play/Pause: Short press the Play/Pause button.
- Next Song / Volume Up: Short press the "Next Song" button for the next track/FM station. Long press to increase volume.
- Previous Song / Volume Down: Short press the "Previous Song" button for the previous track/FM station. Long press to decrease volume.
- Call Handling (Bluetooth Mode):
- When a call comes in, short press the Play/Pause button to answer hands-free.
- Short press again to hang up the call.
- Press twice to redial the last call.
- FM Radio: In FM Mode, short press the Play/Pause button to automatically search for and save stations.
- LED Flashing Light: Short press the LED Light button for different light options. Long press to turn the LED lights On/Off.
Maintenance
Cleaning
Wipe the speaker with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure all ports are dry before charging or connecting other devices.
Water Resistance
The TG656 speaker is waterproof. While it can withstand splashes and rain, do not submerge it in water for extended periods. Ensure the charging port cover is securely closed to maintain water resistance.

Battery Care
- Charge the speaker regularly, even if not in use, to maintain battery health.
- Avoid exposing the speaker to extreme temperatures.
- Do not attempt to replace the battery yourself.
Troubleshooting
| Problem | Possible Solution |
|---|---|
| Speaker does not turn on. | Ensure the battery is charged. Connect to a power source and try again. |
| Cannot pair via Bluetooth. |
|
| No sound from speaker. |
|
| Poor FM radio reception. |
|
| TWS pairing fails. |
|
Specifications
| Feature | Detail |
|---|---|
| Model | TG656 |
| Bluetooth Version | 5.3 |
| Working Distance | Up to 10 meters |
| Signal-to-Noise Ratio (SNR) | ≥ 95 dB |
| Battery Capacity | 1500mAh |
| Normal Volume Playback Time | Approximately 2 hours |
| Speaker Driver | 52mm * 2 |
| Power Output | 4Ω / 8W * 2 (16W PMPO) |
| Frequency Response | 120Hz - 18KHz |
| Charging Input | 5V / 1000mA (USB) |
| Dimensions (L*W*H) | 85.5mm * 85.5mm * 161mm |
| Weight | 560g |
| Waterproof | Yes |
| Playback Functions | Radio, MP3 |
| Supported Media | FM, TF card, USB, AUX |
| Material | Plastic (Cabinet) |
| Audio Crossover | Full-Range |
| Number of Loudspeaker Enclosure | 2 |
| Feature | Play Video (Note: This feature typically refers to playing audio from video content on a connected device, not video playback on the speaker itself.) |
Note: Specifications are subject to change without prior notice.
User Tips
- For optimal sound quality, ensure the speaker is placed on a stable surface.
- When using the FM radio, extending the charging cable (if connected) can sometimes act as an antenna to improve reception.
- To maximize battery life, avoid playing music at maximum volume for extended periods.
- The strap design allows for easy portability; utilize it to hang the speaker on a backpack or bicycle for outdoor activities.

Warranty and Support
For warranty information, technical support, or service inquiries, please contact the retailer or manufacturer directly. Keep your purchase receipt as proof of purchase.





