1. Introduction
This manual provides comprehensive instructions for the HZTZ 58mm Bluetooth Thermal Receipt Printer, model 5890K. Designed for commercial retail POS systems, this compact and efficient printer offers high-quality, low-cost thermal printing without the need for ink or ribbons. It features Bluetooth, USB, and Ethernet connectivity, supports various operating systems including Android, iOS, and Windows, and is compatible with cash drawer drivers. Please read this manual thoroughly before operating the device to ensure proper usage and longevity.
2. Safety Information
- Ensure the printer is connected to a power source within the specified voltage range (220-240V ±10%).
- Do not expose the printer to water or excessive humidity.
- Avoid placing the printer in direct sunlight or near heat sources.
- Keep out of reach of children.
- Do not attempt to disassemble or repair the printer yourself. Contact qualified service personnel if needed.
- Use only approved accessories and power adapters.
3. Package Contents
Please check the package contents upon unboxing:
- HZTZ 58mm Thermal Receipt Printer (Model 5890K)
- Power Adapter
- USB Cable
- Thermal Paper Roll
- Driver CD (for Windows)
- User Manual
4. Product Overview
Familiarize yourself with the printer's components and interfaces.


Key Features:
- Suitable for all types of commercial retail POS systems.
- High-quality and low-cost printing.
- Low noise and high-speed printing (90mm/s).
- Supports cash drawer driver.
- Easy paper installation and maintenance.
- No ribbons or ink cartridges required (thermal printing).
- Supports multiple languages.
- Interface: Bluetooth + USB + Ethernet.
5. Setup Instructions
5.1 Loading Thermal Paper
- Gently press the cover release buttons on both sides of the printer to open the top cover.
- Insert the thermal paper roll into the paper compartment, ensuring the printing side faces upwards and the paper feeds smoothly from the bottom of the roll.
- Pull a small length of paper out past the paper exit.
- Close the top cover firmly until it clicks into place.
5.2 Power Connection
- Connect the power adapter to the printer's power interface.
- Plug the power adapter into a suitable electrical outlet.
- Press the power button to turn on the printer. The power light should illuminate.
5.3 Connecting to Devices
The printer supports Bluetooth, USB, and Ethernet connections.

5.3.1 Bluetooth Connection (for Android/iOS)
- Ensure the printer is powered on and within range of your mobile device.
- On your mobile device, go to Bluetooth settings and turn on Bluetooth.
- Search for available devices. The printer should appear as "Printer_XXXX" or similar.
- Select the printer to pair. If prompted for a password, enter "0000" or "1234".
- Once paired, you can use compatible POS applications (e.g., Loyverse, Kyte) to print.
5.3.2 USB Connection (for Windows/Linux)
- Connect the printer to your computer using the provided USB cable.
- Insert the driver CD into your computer's CD-ROM drive.
- Follow the on-screen instructions to install the printer drivers. If no CD drive, drivers can usually be downloaded from the manufacturer's website.
- After installation, the printer should be recognized by your operating system.
5.3.3 Ethernet Connection (for Network Printing)
If your model supports Ethernet, connect an Ethernet cable from your network router/switch to the printer's Ethernet port. Configure network settings via the printer's utility software or web interface as per your network setup.
6. Operating Instructions
6.1 Printing a Test Page
To confirm the printer is functioning correctly after setup:
- With the printer powered off, hold down the "FEED" button.
- While holding "FEED", press the "POWER" button to turn on the printer.
- Release both buttons once the printer starts printing. A test page containing printer information should be printed.
6.2 Printing from Applications
Once connected, you can print receipts from your chosen application:
- For Mobile Apps (Android/iOS): Open your POS application (e.g., Loyverse, Kyte), select the print option, and ensure the HZTZ printer is selected as the output device.
- For PC Applications (Windows/Linux): Open your POS software or document, select "Print", choose the HZTZ printer from the list of available printers, and click "Print".

7. Maintenance
7.1 Cleaning the Printer Head
Regular cleaning ensures optimal print quality and extends the life of the printer head.
- Turn off the printer and disconnect the power cable.
- Open the top cover.
- Use a soft, lint-free cloth dampened with isopropyl alcohol to gently wipe the thermal print head.
- Allow the print head to dry completely before closing the cover and reconnecting power.
7.2 General Cleaning
- Wipe the exterior of the printer with a soft, dry cloth.
- Do not use abrasive cleaners or solvents.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Printer does not power on. | No power, faulty power adapter. | Check power cable connection. Ensure outlet is working. Try a different power adapter if available. |
| No printing. | No paper, paper jammed, incorrect connection, driver issue. | Check paper roll and reload if empty. Clear any paper jams. Verify USB/Bluetooth/Ethernet connection. Reinstall drivers if necessary. |
| Poor print quality. | Dirty print head, low quality thermal paper. | Clean the print head (see Maintenance section). Use high-quality thermal paper. |
| Bluetooth connection fails. | Printer not in pairing mode, incorrect password, interference. | Ensure printer is discoverable. Re-enter pairing password. Move closer to the printer. |
| 58mm printer not printing horizontal lines well. | Limitation of 58mm printer design. | This is a known characteristic for 58mm thermal printers. For better horizontal line printing, an 80mm printer is recommended. |
9. Specifications
| Feature | Detail |
|---|---|
| Brand Name | HZTZ |
| Model | 5890K |
| Type | Thermal Printer (Receipt Printer Bluetooth) |
| Print Method | Thermal Line Printing |
| Print Speed | 90mm/sec (Black Print Speed) / 20ppm |
| Max. Resolution | 203dpi (384 dots/line) |
| Paper Width | 57.5 +/-0.5mm (Max Paper Size 58mm) |
| Rolling Paper Diameter | 50mm |
| Consumable Type | Thermal Paper (No Ink/Ribbon needed) |
| Interface Type | Bluetooth (V4.0, compatible with 3.0 and 2.0), USB-B, Ethernet port |
| Supports Network Printing | Wireless (Bluetooth), Wired (Ethernet) |
| Application | For Commercial (POS Systems) |
| Use | Thermal Printer |
| Voltage | 220-240V (±10%) |
| Power Input | DC 12V/3A |
| Cash Drawer Control | DC 12V/1A |
| Reliability | 100km TPH Life |
| Dimensions (L x W x H) | Approx. 20cm x 16cm x 13cm |
| Weight | Approx. 0.85kg |
| Battery Included | No |
| Compatible OS | Windows, Android, iOS, Linux |
| Command Set | ESC/POS |
| Character Set | ANK character, Font A, Font B, Font C, Simplified/Traditional Chinese |
| Barcode Types | UPC-A/E, JAN13 (EAN13)/8 (EAN8), ITF, Codebar, Code 39/93/128 |
| Certification | CE |
10. User Tips
- For optimal performance and to avoid issues with horizontal lines, consider using an 80mm thermal printer if your application requires precise horizontal line printing, as 58mm printers may not render horizontal frames perfectly.
- Always ensure the thermal paper is loaded correctly with the printing side facing up. Incorrect loading will result in blank prints.
- If using a mobile application, ensure it is compatible with generic ESC/POS thermal printers and supports Bluetooth connectivity.
- Keep the printer's firmware updated if updates become available, as this can improve compatibility and performance.
11. Warranty and Support
The product comes with a manufacturer's warranty. For specific warranty details and duration, please refer to your purchase documentation or contact the seller directly.
Technical Support
For technical assistance, troubleshooting, or any product-related inquiries, please contact the seller or manufacturer using the following information:
- Mob/WhatsApp: +86 136 2287 7533
- Email: hztz.fiona@outlook.com
- Online Support: Consult customer service via the platform where the product was purchased.
When contacting support, please have your product model (5890K) and a detailed description of the issue ready.