Introduction
This manual provides detailed instructions for the YKR-T/011E universal remote control. This remote is designed to operate various air conditioner units, including those from AUX and LORIOT, and can also replace models YKR-T/012E and YKR-T/013E. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your remote control.
Setup
Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide open the battery compartment cover.
- Insert two (2) AAA batteries, ensuring that the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Operating Instructions
Point the remote control directly at the air conditioner's receiver when operating. Ensure there are no obstructions between the remote and the unit.
- ON/OFF: Press this button to turn the air conditioner unit on or off.
- MODE: Cycles through the available operating modes: COOL, HEAT, FAN, DRY, and AUTO.
- COOL: Directly selects the cooling mode.
- HEAT: Directly selects the heating mode.
- SPEED: Adjusts the fan speed (e.g., Low, Medium, High, Auto).
- TIMER: Used to set a specific time for the air conditioner to turn on or off automatically.
- +/- (Temperature Adjustment): Increases or decreases the desired temperature setting.
- L/R SWING: Controls the horizontal movement of the air conditioner's louvers.
- U/D SWING: Controls the vertical movement of the air conditioner's louvers.
- MENU/OK: Accesses additional settings or confirms selections within a menu.
Specifications
| Feature | Specification |
|---|---|
| Model Number | YKR-T/011E |
| Frequency | 433 MHz |
| Channel | 4 |
| Wireless Communication | IR (Infrared) |
| Use | Air Conditioner |
| Package | Yes |
| Support APP | No |
Maintenance
Cleaning
- Wipe the remote control with a soft, dry cloth.
- Do not use liquid cleaners, abrasive pads, or chemical solvents, as these may damage the remote's surface or internal components.
Battery Replacement
- Replace batteries when the remote's operating range decreases significantly or the display becomes dim.
- Always replace both batteries at the same time.
- Remove old batteries promptly to prevent leakage, which can damage the remote.
Troubleshooting
- Remote not responding: Check if the batteries are inserted correctly with the right polarity. Replace old batteries with new ones. Ensure there are no obstructions between the remote control and the air conditioner's infrared receiver.
- Limited operating range: This usually indicates low battery power. Replace the batteries. Also, ensure you are pointing the remote directly at the AC unit's receiver.
- AC unit not responding to specific functions: While this is a universal remote, some advanced or brand-specific functions of your AC unit might not be supported. Refer to your air conditioner's original manual for its specific features.
User Tips
- For optimal performance, ensure the remote is compatible with your specific air conditioner model. While designed for AUX and LORIOT, compatibility with other brands like BASIC, HALO, or Bissell should be verified with your AC unit's manual or manufacturer.
- Keep the remote control away from direct sunlight and heat sources to prevent damage to the LCD display and internal components.
- Avoid dropping the remote control, as this can cause internal damage.
Warranty and Support
This remote control is typically covered by a standard manufacturer's warranty. For any issues, technical support, or warranty claims, please contact the seller or the manufacturer directly. Keep your purchase receipt as proof of purchase.
