1. Introduction
Thank you for choosing the WOLFBOX Upgraded WDR Rear Camera. This camera is designed to enhance your driving safety by providing clear, high-quality rear-view footage in various lighting and weather conditions. Featuring advanced WDR (Wide Dynamic Range) technology, IP68 waterproofing, and high-temperature resistance, it ensures reliable performance. This manual provides essential information for installation, operation, maintenance, and troubleshooting.
Compatibility: This camera is specifically designed for use with WOLFBOX dash cam models G840S, G930, G850 PRO, G900, G910, T10, T10 Plus, and D07.
2. Package Contents
Please check the package for the following items:
- WOLFBOX Upgraded WDR Rear Camera Unit
- Mounting Bracket (pre-attached or separate)
- Connection Cable
Image: WOLFBOX Upgraded WDR Rear Camera unit.
3. Setup and Installation
The installation process is designed to be straightforward, often utilizing the same connector as your existing camera.
3.1. General Installation Steps
- Disconnect Old Camera: If replacing an existing camera, unplug its connection cable from your main dash cam unit.
- Connect New Camera: Plug the connection cable of the WOLFBOX Upgraded WDR Rear Camera into the designated rear camera port on your compatible WOLFBOX dash cam.
- Route Cable: Carefully route the connection cable from the dash cam to the desired mounting location for the rear camera, ensuring it does not interfere with vehicle operations or safety features.
- Mount Camera: Securely mount the rear camera using the provided bracket. Ensure the camera has a clear, unobstructed view of the rear of your vehicle.
- Test: Power on your dash cam system and verify that the rear camera feed is displayed correctly. Adjust the camera angle as needed.
3.2. Internal Mounting with Iron Plate (If Applicable)
If you are installing the rear camera inside the car and require additional mounting support, follow these steps:
Image: Four-step installation guide for mounting the rear camera inside the car using an iron plate.
- Step 1: The rear camera requires the use of an iron plate for internal mounting.
- Step 2: Remove the original iron plate from the camera if one is pre-attached, or prepare the separate iron plate.
- Step 3: Install the two iron plates together (if applicable) and securely attach them to the rear camera using screws.
- Step 4: Adjust the angle of the camera and mount it securely inside the car at your desired location.
4. Operating Features
Your WOLFBOX Upgraded WDR Rear Camera is equipped with several advanced features to ensure optimal performance:
4.1. WDR & Super Night Vision
This camera utilizes WDR (Wide Dynamic Range) technology, which automatically balances the light and dark areas of the video. This results in vivid videos and images even in strong or low light conditions, significantly improving night vision. WDR restores true colors and compensates for light and dark spots within a single frame, reducing glare from headlights and ensuring clarity.
Image: WDR Super Night Vision in action, showing clear view in city traffic at night.
Image: Comparison of WDR vs standard 1080P image quality, showing reduced glare from headlights with WDR.
4.2. IP68 Level Waterproof
The camera boasts an IP68 waterproof rating, making it highly resistant to water and dust. You can confidently use it in various weather conditions, including rain, snow, fog, and even extreme heat, without compromising performance.
Image: IP68 Level Waterproof demonstration with water droplets on the camera.
4.3. Clear Recording in Various Conditions
The camera is engineered to provide clear recordings whether you are driving on rainy days, dark roads, in foggy weather, or during snowy nights.
Image: Clear Recording in Various Conditions (Rainy Days, Dark Roads, Foggy Weather, Snow Nights).
5. Maintenance
- Cleaning the Lens: Regularly clean the camera lens with a soft, lint-free cloth. For stubborn dirt, use a small amount of lens cleaning solution. Avoid abrasive materials that could scratch the lens.
- Cable Inspection: Periodically check the connection cable for any signs of wear, damage, or loose connections.
- Mounting Security: Ensure the camera remains securely mounted. Re-tighten any screws or adjust the bracket if necessary.
- Temperature Range: While the camera is designed for high-temperature resistance (Operating: -20°C to 70°C, Storage: -30°C to 80°C), avoid prolonged exposure to extreme temperatures outside this range when possible.
6. Troubleshooting
- No Image Displayed:
- Ensure the camera cable is securely connected to both the camera and the main dash cam unit.
- Verify that the main dash cam unit is powered on and functioning correctly.
- Check if the correct input source is selected on your dash cam's display.
- Image is Blurry or Unclear:
- Clean the camera lens thoroughly.
- Ensure the camera is securely mounted and not vibrating.
- Check if the protective film (if any) has been removed from the lens.
- Image is Too Bright or Too Dark (Glare):
- The WDR feature should automatically handle most lighting conditions. If issues persist, ensure your dash cam's firmware is up to date.
- Adjust the camera angle slightly to minimize direct glare from strong light sources.
7. Specifications
| Feature | Specification |
|---|---|
| Camera Resolution | 1920x1080 (1080P) |
| Frames Per Second (FPS) | 25 |
| Chipset Manufacturer | HISILICON |
| Waterproof Rating | IP68 |
| Operating Temperature | -20°C to 70°C (-4°F to 158°F) |
| Storage Temperature | -30°C to 80°C (-22°F to 176°F) |
| Assembly Mode | Portable Recorder (Refers to the main DVR unit) |
8. User Tips
- Users have noted the camera provides a clear image with true wide dynamic range, effectively showing light sources and surrounding details with minimal glare.
- The image may appear slightly underexposed at night, which can be beneficial as it resembles a regular mirror, preventing blinding while still retaining crucial information in dark areas.
- The camera significantly improves clarity and reduces glare from car lights during nighttime driving compared to standard cameras.
9. Frequently Asked Questions (FAQ)
- Q: Is this camera compatible with the Wolfbox 900 Tripro or G900 Pro?
- A: Yes, this camera is compatible with the G900 series, including the G900 Pro.
- Q: Does it fit the G880 Wolfbox?
- A: No, this camera is not suitable for G840H, G880, or G700 models.
- Q: Does it include the cable to connect to the mirror/dash cam?
- A: Yes, the connection cable required to link the camera to your main dash cam unit is included.
10. Warranty and Support
WOLFBOX provides a 1-year free-replacement warranty for quality problems. If you encounter any issues with your product, please contact WOLFBOX customer support for assistance. Please refer to your purchase documentation for specific contact details.