1. Introduction
The SUMRY MPS-V MAX Series 10.2kW 48VDC Hybrid Solar Inverter is a high-efficiency pure sine wave inverter designed for both on-grid and off-grid solar power systems. It features dual PV input, dual MPPT solar charge controllers, and dual AC output, providing reliable and continuous power for various applications. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your inverter.


2. Safety Information
Please read all instructions and warnings carefully before installation and operation. This inverter generates high voltage and current. Improper installation or use can result in serious injury or death. Only qualified personnel should perform installation and maintenance.
- Ensure proper grounding.
- Do not disassemble the inverter.
- Keep away from flammable materials.
- Ensure adequate ventilation.
- Disconnect all power sources before servicing.
3. Setup and Installation
This section outlines the physical installation and wiring connections for the inverter. Refer to the diagrams for correct port identification and connection procedures.
3.1 Unboxing and Inspection
Carefully remove the inverter from its packaging. Inspect the unit for any physical damage. Ensure all components listed in the packing list are present.
3.2 Physical Dimensions and Port Overview
The inverter has dimensions of 537mm (Length) x 390mm (Width) x 130mm (Height).


3.3 Wiring Connections
Follow these steps for wiring the inverter:
- Battery Connection: Connect the battery cables to the inverter's battery terminals. Ensure correct polarity (positive to positive, negative to negative). The inverter supports various battery types including Flooded, Gel, Lithium-iron phosphate, Lithium-ion, and AGM/Sealed.


- PV Input Connection: Connect your solar panels to the PV1 and PV2 input terminals. Ensure the PV array open circuit voltage and operating voltage are within the specified ranges.
- AC Input Connection: Connect the AC input from your utility grid or generator to the AC IN terminals.
- AC Output Connection: Connect your AC loads to the MAIN OUT and SECOND OUT terminals. The inverter features dual AC outputs.
- Communication Port: Connect the RS-232/RS-485/WIFI communication port for monitoring and control via the dedicated app.

4. Operating Instructions
The inverter is designed for user-friendly operation with a clear LCD display and touch buttons.
4.1 Powering On/Off
Once all connections are secure, switch on the battery breaker (if applicable), then the AC input breaker, and finally the inverter's power switch. To power off, reverse the sequence.
4.2 LCD Display and Function Buttons
The LCD display provides real-time information about the inverter's status, input/output voltages, battery status, and more. Use the function buttons to navigate menus and adjust settings.

LED Indicator Messages:
| LED Indicator | Color | Messages |
|---|---|---|
| INV/AC | Green | Solid On: Output is powered by utility in Line mode. Flashing: Output is powered by battery or PV in battery mode. |
| CHG | Green | Solid On: Battery is fully charged. Flashing: Battery is charging. |
| FAULT | Red | Solid On: Fault occurs in the inverter. Flashing: Warning condition occurs in the inverter. |
Function Keys:
| Function Key | Description |
|---|---|
| ESC | To exit setting mode |
| UP | To go to previous selection |
| DOWN | To go to next selection |
| ENTER | To confirm the selection in setting mode or enter setting mode |
4.3 Remote Monitoring and Control
The inverter supports remote monitoring and control via a dedicated mobile application (available for iOS and Android) using WiFi or GPRS. This allows you to check system status, adjust settings, and receive alerts from anywhere.

5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your SUMRY Hybrid Solar Inverter.
- Cleaning: Keep the inverter's vents and surfaces clean and free from dust and debris to ensure proper heat dissipation.
- Connection Checks: Periodically inspect all wiring connections for tightness and signs of corrosion.
- Battery Health: Monitor battery voltage and health, especially for lead-acid batteries, to ensure they are functioning correctly.
- Environmental Conditions: Ensure the inverter is operating within its specified temperature and humidity ranges.
6. Troubleshooting
This section provides guidance on common issues. Refer to the LED indicator messages for initial diagnosis.
6.1 Common Issues and Solutions
- No Power Output: Check AC input, battery connections, and PV input. Ensure all breakers are on.
- Fault LED On: Refer to the LED Indicator Messages table (Figure 8) for the specific fault code and consult the full manual for detailed troubleshooting steps.
- Warning LED Flashing: Indicates a warning condition. Check system parameters via the LCD or app to identify the specific warning.
6.2 Protection Features
The inverter is equipped with comprehensive protection features to ensure safe operation:

7. Specifications
| Attribute | Value |
|---|---|
| Model Number | vmax 10.2kw |
| Rated Power | 10.2kW |
| Output Power | 1 - 200 KW |
| Output Type | SINGLE |
| Output Frequency | 50/60hz |
| Input Voltage | 220/230/240VAC |
| Selectable Voltage Range | 170-280VAC (for personal computers), 90-280VAC (for home appliances) |
| Frequency Range | 50hz/60hz (auto sensing) |
| AC Voltage Regulation (Battery Mode) | 230VAC±5% |
| Wave Form | Pure Sine Wave |
| Battery Voltage | 48VDC |
| Maximum PV Array Open Circuit Voltage | 102VDC (Note: Images indicate 90-500VDC MPPT range) |
| MPPT Range @ Operating Voltage | 30-80VDC (Note: Images indicate 90-450VDC MPPT range) |
| Maximum AC Charging Current | 20 or 30A (Note: Images indicate 140A/160A for solar charging) |
| Standby Power Consumption | 2W |
| Size (D*W*H) | 550*350*150mm (Note: Images indicate 537*390*130mm) |
| Weight | 17kg |
| Is Smart Device | No (Note: WiFi/GPRS for app monitoring is available as an option) |
| Certification | CE, RoHS, WEEE |
Note: Some specifications may vary slightly between different data sources (JSON vs. images). Please refer to the product label on your specific unit for the most accurate information.
8. User Tips
- Parallel Operation: The inverter supports parallel operation, allowing you to connect multiple units to increase overall power capacity. Consult the detailed wiring diagrams in the comprehensive manual for proper parallel setup.
- Appliance Compatibility: This inverter is capable of powering a wide range of appliances, including high-power devices like radial compressors (e.g., 2.5kW at 220V), provided the total load does not exceed the inverter's rated output.
- Battery-less Operation: The inverter can operate without a battery, directly utilizing solar power or grid/generator input to supply loads.

9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the SUMRY Official Store or your authorized dealer. Keep your purchase receipt as proof of purchase for warranty claims.