WAYXIN T2 Motorcycle Bluetooth Intercom Helmet Headset

1. Introduction

The WAYXIN T2 is a motorcycle helmet intercom system designed to enhance communication and entertainment for riders. It supports two-person intercom communication over a distance of up to 30 meters, featuring DSP and CVC noise reduction for clear sound. Equipped with an intelligent Bluetooth 5.0 chip, it offers stable connectivity for auto-answering calls, hands-free calling, voice assistant activation, and audio playback, significantly improving riding safety and experience. Its robust IP67 waterproof design ensures reliable performance in various outdoor weather conditions.

Figure 1: WAYXIN T2 Intercom highlighting key features.

2. Package Contents

Please check the package contents upon unboxing to ensure all components are present:

• 1 x WAYXIN T2 Host Unit
• 1 x Headset & Microphone (available in Boom Microphone for half-face helmets or Button Microphone for full-face helmets)
• 1 x Mounting Bracket (Clip-on type)
• 1 x Pasting Bracket (Adhesive type)
• 1 x Type-C Charging Cable
• 1 x User Manual

Figure 2: Package contents for the Boom Microphone version.

Figure 3: Package contents for the Button Microphone version.

3. Specifications

4. Installation

The WAYXIN T2 offers two primary installation methods to suit different helmet types and preferences:

4.1 Microphone Selection

Choose the appropriate microphone type based on your helmet:

• Boom Microphone: Recommended for half-face helmets, off-road helmets, and summer helmets. This microphone extends closer to your mouth.
• Button Microphone: Recommended for full-face helmets. This microphone is designed to be placed inside the helmet near the mouth area.

Figure 4: Microphone types for different helmets.

4.2 Mounting the Host Unit

The host unit can be attached to your helmet using either the clip bracket or the paste bracket.

1. Clip Bracket Installation:
   • Open the metal piece of the clip bracket.
   • Plug the clip into the edge of your helmet, ensuring it is securely fastened.
   • Slide the WAYXIN T2 host unit into the bracket until it clicks into place.
2. Paste Bracket Installation:
   • Clean the desired mounting area on your helmet thoroughly.
   • Tear off the red protective film from the adhesive paste bracket.
   • Firmly press the paste bracket onto the edge of the helmet and hold for a few seconds to ensure strong adhesion.
   • Slide the WAYXIN T2 host unit into the bracket until it clicks into place.

Figure 5: Two methods for installing the host unit.

5. Setup and Pairing

5.1 Connecting to Your Phone (Bluetooth Pairing)

Follow these steps to pair your WAYXIN T2 with your smartphone or other Bluetooth-enabled device:

1. With the WAYXIN T2 powered off, press and hold the dedicated "phone" button on the unit until the red and blue indicator lights begin to flash alternately. This indicates pairing mode.
2. On your smartphone, navigate to the Bluetooth settings menu.
3. Search for available devices and select "WAYXIN T2" from the list.
4. Once connected, the product's LED indicator will show a steady blue light.

Note: If your mobile phone has specific Bluetooth permission settings, please grant the necessary permissions for the WAYXIN T2 to function correctly.

5.2 Connecting Intercoms (Rider-to-Rider Pairing)

To establish intercom communication between two WAYXIN T2 units:

1. Ensure both WAYXIN T2 units are powered ON.
2. On the first unit, press and hold the "intercom" button for approximately 4 seconds until it enters pairing mode (blue light flashes rapidly).
3. On the second unit, click the "intercom" button to search for the first unit.
4. Once successfully paired, both units' blue lights will flash simultaneously.
5. To enter intercom mode, click the "intercom" button on either unit. The intercom status will be indicated by a flashing purple light.

Figure 6: Phone and intercom pairing instructions.

6. Operating Instructions

The WAYXIN T2 offers several functions for enhanced riding communication and entertainment:

• Intercom Communication: Once paired, two riders can communicate wirelessly up to 30 meters apart. Activate intercom mode by pressing the intercom button.
• Phone Calls: When connected to your smartphone via Bluetooth, the device supports automatic call answering. You can also make and receive calls hands-free.
• Voice Assistant: Access your phone's voice assistant (e.g., Siri, Google Assistant) directly from the intercom unit. Refer to your phone's manual for specific voice command functions.
• Audio Playback: Stream music, podcasts, or GPS navigation audio from your paired smartphone directly to your helmet speakers.
• Noise Reduction: The integrated DSP and CVC noise reduction technologies actively reduce environmental noise, such as wind and engine sounds, for clearer audio during calls and intercom use.

Figure 7: Bluetooth connectivity with smart devices.

Figure 8: DSP and CVC noise reduction in action.

7. Maintenance

To ensure the longevity and optimal performance of your WAYXIN T2 intercom, please follow these maintenance guidelines:

• Cleaning: Wipe the unit with a soft, damp cloth. Avoid using harsh chemicals, solvents, or abrasive cleaners.
• Water Protection: Although the device is IP67 waterproof, always ensure the Type-C charging port cover is securely closed when not charging to maintain its water resistance.
• Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: For long-term storage, charge the battery to approximately 50% every few months to prevent deep discharge and extend battery life.
• Cable Care: Handle the charging cable and headset wires gently to prevent damage.

8. Troubleshooting

If you encounter any issues with your WAYXIN T2, please refer to the following common troubleshooting steps:

9. User Tips

Based on common user experiences, here are some tips for optimizing your WAYXIN T2:

• Microphone Placement: For best voice clarity, especially at higher speeds, ensure your chosen microphone (boom or button) is positioned as close to your mouth as possible without obstructing your vision or comfort.
• Speaker Positioning: Take time to correctly position the speakers inside your helmet, aligning them with your ears for optimal sound quality and volume.
• Charging Habits: While the battery life is substantial, it's good practice to fully charge the unit before long rides to ensure uninterrupted communication and entertainment.
• Firmware Updates: Check the manufacturer's website periodically for any available firmware updates, which may improve performance or add new features.

10. Warranty and Support

Your WAYXIN T2 Motorcycle Bluetooth Intercom Helmet Headset comes with a manufacturer's limited warranty.

• Main Unit Warranty: A 12-month limited warranty covers defective items from the date of receipt. This warranty does not cover items damaged due to misuse or improper handling after receipt.
• Accessories Warranty: Accessories included with the unit (e.g., headset, microphones, cables) come with a 3-month warranty.

For warranty claims or technical support, please contact your retailer or the manufacturer directly, providing your order number and a detailed description of the issue.