1. Introduction
Thank you for choosing the Andoer Tripod Smartphone Vlog Video Kit. This kit is designed to enhance your smartphone video recording experience, making it ideal for vlogging, interviews, live streaming, online makeup tutorials, video chatting, and more. It includes a high-quality microphone, an LED video light, a universal phone clamp, a remote shutter, and a tripod stand. This manual provides detailed instructions for setup, operation, and maintenance of both the KIT-05LM (tall tripod) and KIT-01LM (handle tripod) variants.
2. Package Contents
Please check the package to ensure all items are present:
- 1 x Tripod Stand (Tall for KIT-05LM, Handle for KIT-01LM)
- 1 x Cold Shoe Phone Clamp
- 1 x Microphone
- 1 x LED Video Light
- 1 x Remote Control
3. Specifications
Common Specifications for KIT-05LM & KIT-01LM
| Component | Specification |
|---|---|
| Main Material | Plastic |
| Phone Clamping Range | 5.4-8.3cm / 2.13-3.27in |
| Remote Shutter Power Supply | Button cell CR2032 3V/210mAh (Included) |
| Package Size | 24.5 * 20.5 * 4cm / 9.64 * 8.07 * 1.57in |
| Package Weight | 339g / 11.96oz |
LED Light Specifications
| Feature | Specification |
|---|---|
| Illuminance (0.5m) | White light ≥600Lux |
| Power | Max. 5W |
| Lamp Bead Quantity | 49pcs |
| Color Temperature | 6500K (±200K) |
| Power Supply | 2pcs AA batteries (Not included) |
| Working Time | 60 minutes at maximum power output |
Microphone Specifications
| Feature | Specification |
|---|---|
| Transducer Type | Electret condenser |
| Polar Pattern | Super-cardioid |
| Frequency Response | 20Hz-18kHz |
| Sensitivity | -42dB±3dB |
| Impedance | 2000Ω |
| Length | 13.5cm / 5.31in |
| Power Supply | 1pc AAA battery (Not included) |
| Interface | 3.5mm TRRS plug |
Tripod Specific Specifications
| Model | Working Height | Fold Length |
|---|---|---|
| KIT-05LM (Tall Tripod) | 34-105cm / 13.39-41.34in (without phone clamp) | 35cm / 13.78in |
| KIT-01LM (Handle Tripod) | 10cm / 3.94in (without phone clamp) | 16cm / 6.3in (handle grip: 13cm / 5.12in) |
4. Setup Guide
4.1 Battery Installation
- **LED Video Light**: Open the battery compartment on the back of the LED light. Insert 2 x AA batteries (not included), ensuring correct polarity. Close the compartment.
- **Microphone**: Open the battery compartment on the microphone. Insert 1 x AAA battery (not included), ensuring correct polarity. Close the compartment.
- **Remote Control**: The remote control comes with a pre-installed CR2032 button cell battery. If replacement is needed, refer to the remote's specific instructions.
4.2 Assembly
- **Attach Phone Clamp to Tripod**: Screw the cold shoe phone clamp onto the 1/4-inch screw on top of the tripod stand. Tighten securely.
- **Mount LED Light**: Slide the LED video light onto one of the cold shoe mounts on the phone clamp or the microphone.
- **Mount Microphone**: Slide the microphone onto the remaining cold shoe mount on the phone clamp or the LED light.
- **Connect Microphone to Smartphone**: Plug the 3.5mm TRRS plug of the microphone into your smartphone's 3.5mm audio jack. If your smartphone does not have a 3.5mm jack (e.g., Type-C or Lightning port), an appropriate adapter cable (not included) is required.
5. Operating Instructions
5.1 Using the Tripod Stand
- **KIT-05LM (Tall Tripod)**: Extend the tripod legs and adjust the height using the locking clips on each section. The working height can be adjusted from 34cm to 105cm. The tripod head allows for free tilting and 360-degree horizontal rotation. Loosen the knob to adjust, then tighten to secure.
- **KIT-01LM (Handle Tripod)**: Unfold the tripod legs to use it as a stable tabletop stand. When folded, it can be used as a comfortable handgrip for mobile shooting.
5.2 Using the Phone Clamp
Gently pull apart the spring-loaded arms of the phone clamp and insert your smartphone. Ensure the phone is securely held. The clamp can also be flipped 90 degrees to switch between horizontal and vertical shooting modes.
5.3 Using the LED Video Light
Press the ON/OFF button on the back of the LED light to turn it on or off. The light is dimmable, allowing you to adjust brightness to meet different shooting needs. Simply press and hold the ON/OFF button to cycle through brightness levels.
5.4 Using the Microphone
The microphone features a cardioid pickup pattern and a noise-reduction sponge windshield to capture clear audio. For KIT-05LM, the microphone has an external switch to select between camera and smartphone working modes. Ensure the correct mode is selected for your device. No adapter cable is required for this switch functionality.
5.5 Using the Remote Control
- **Pairing**: Turn on Bluetooth on your smartphone. Press and hold the power button on the remote control until the indicator light flashes, indicating it's in pairing mode. Select the remote control from your smartphone's Bluetooth device list to pair.
- **Operation**: Once paired, use the remote control to trigger your smartphone's camera shutter for photos or start/stop video recording. The remote has separate buttons for iOS and Android devices.
6. Maintenance
- Keep all components clean and dry. Use a soft, dry cloth to wipe surfaces.
- Avoid exposing the kit to extreme temperatures, humidity, or direct sunlight.
- Remove batteries from the LED light and microphone if not in use for extended periods to prevent leakage.
- Store the kit in a protective bag or case when not in use to prevent damage.
7. Troubleshooting
- Microphone not working:
- Ensure the AAA battery in the microphone is correctly installed and has sufficient charge.
- Verify the microphone's 3.5mm TRRS plug is fully inserted into your smartphone's audio jack or adapter.
- If using an adapter (for Type-C or Lightning ports), ensure it is functional and compatible.
- For KIT-05LM, check that the microphone's camera/smartphone mode switch is set to the correct position for your device.
- Test the microphone with another device if possible to isolate the issue.
- Check your smartphone's audio input settings to ensure the external microphone is selected.
- LED Light not turning on:
- Ensure 2 x AA batteries are correctly installed and have sufficient charge.
- Check the battery compartment for any corrosion or loose connections.
- Try replacing the batteries with new ones.
- Remote Control not pairing or working:
- Ensure Bluetooth is enabled on your smartphone.
- Make sure the remote control is in pairing mode (flashing indicator light).
- Check if the CR2032 button cell battery needs replacement.
- Ensure you are selecting the correct device in your smartphone's Bluetooth settings.
- The remote control has separate buttons for iOS and Android; ensure you are pressing the correct one for your device.
8. User Tips
- For optimal audio quality, ensure the microphone is positioned correctly towards the sound source and the sponge windshield is used to minimize wind noise.
- When using the tall tripod (KIT-05LM) at maximum height, ensure it is placed on a stable, flat surface to prevent tipping.
- Always secure your smartphone firmly in the phone clamp before adjusting the tripod or moving the setup.
9. Warranty and Support
For warranty information or technical support, please refer to the seller's official website or contact their customer service directly. Keep your purchase receipt as proof of purchase.
