Miyota 1L45

Contents

Miyota 1L45 Quartz Movement Instruction Manual

Model: 1L45 | Brand: Miyota

Introduction

This manual provides essential information for the proper handling, installation, and maintenance of your Miyota 1L45 quartz watch movement. The Miyota 1L45 is a reliable Japanese-made quartz movement featuring a 2-pin design and a small second hand function.

Note: Installation of watch movements requires specialized tools and expertise. It is highly recommended that installation be performed by a qualified watchmaker or technician.

Product Overview

Front view of Miyota 1L45 quartz watch movement with battery, stem, and gear.
Figure 1: Front view of the Miyota 1L45 movement. Visible components include the battery (SR621SW), coil, and setting stem opening. The movement is marked 'MIYOTA 1L45', 'NO JEWELS', and 'JAPAN'.
Back view of Miyota 1L45 quartz watch movement showing the gear train.
Figure 2: Back view of the Miyota 1L45 movement, illustrating the intricate gear train and mounting points.

The Miyota 1L45 is a compact quartz movement designed for watches requiring a small second display. It is known for its reliability and precision.

Setup and Installation

  1. Preparation: Ensure your workspace is clean, dust-free, and well-lit. Use appropriate watchmaking tools, including non-magnetic tweezers and screwdrivers.
  2. Battery Installation: The movement comes with a pre-installed SR621SW battery. If replacing, carefully remove the old battery and insert the new one with the positive (+) side facing up, as indicated on the movement (see Figure 1).
  3. Stem Insertion: Gently insert the watch stem (crown) into the movement's stem opening. Ensure it clicks into place. Do not force the stem, as this can damage the setting mechanism.
  4. Dial and Hands Attachment: Carefully attach the watch dial to the movement. Then, using specialized tools, attach the hour, minute, and small second hands. Ensure hands are properly aligned and do not touch each other or the dial.
  5. Casing: Place the assembled movement, dial, and hands into the watch case. Secure the movement using movement clamps or screws if applicable to your watch case.
  6. Case Back Closure: Close the watch case back securely, ensuring any gaskets are properly seated to maintain water resistance (if applicable to your watch).
Example of a gold pocket watch, illustrating a potential application for the movement.
Figure 3: An example of a watch where a movement like the Miyota 1L45 might be installed.

Operating Instructions

  • Time Setting: Pull the crown out to the time-setting position. Rotate the crown to adjust the hour and minute hands to the correct time. Push the crown back in to start the movement.
  • Small Second Hand: The small second hand operates continuously once the movement is running.
  • Initial Start-up: After battery installation or replacement, the movement should start automatically once the crown is pushed back into the normal operating position. If it does not start, gently tap the watch or check battery contact.

Maintenance

  • Battery Replacement: The typical lifespan of an SR621SW battery is approximately 2-3 years, depending on usage. Replace the battery promptly when the watch stops or runs intermittently. Always use a fresh, high-quality SR621SW (364) battery.
  • Cleaning: Keep the movement free from dust and moisture. Avoid exposing the watch to extreme temperatures or strong magnetic fields.
  • Professional Servicing: For optimal performance and longevity, consider having your watch serviced by a professional watchmaker every few years.

Troubleshooting

Problem Possible Cause Solution
Watch does not run after installation.
  • Dead or low battery.
  • Improper battery contact.
  • Stem not fully pushed in.
  • Movement damage during installation.
  • Replace battery with a new SR621SW.
  • Check battery contacts for proper seating.
  • Ensure crown is fully pushed into the normal operating position.
  • Consult a professional watchmaker.
Watch runs intermittently or loses time.
  • Low battery.
  • Dirt or debris in the movement.
  • Magnetic interference.
  • Replace battery.
  • Have the movement cleaned by a professional.
  • Demagnetize the watch or keep it away from strong magnetic sources.
Hands do not move when setting time.
  • Stem not properly engaged.
  • Damaged setting mechanism.
  • Re-insert the stem carefully, ensuring it clicks into place.
  • Consult a professional watchmaker.

Specifications

Feature Detail
Movement Type Quartz
Caliber 1L45
Manufacturer Miyota (Citizen Watch Co.)
Origin Japan
Jewels 0 (No Jewels)
Functions 2-hand with small second at 6 o'clock position
Battery Type SR621SW (364)
Stem Type 2-pin
Dimensions Specific dimensions (height, length, width) are not provided in the available data. This is a compact movement typically used in wristwatches.

User Tips

  • Professional Installation: For best results and to avoid damage, always have the movement installed by a professional watchmaker. Many users report perfect functionality when installed correctly.
  • Check Compatibility: Before purchasing, carefully measure the dimensions of your watch case and existing movement to ensure the Miyota 1L45 is a suitable replacement.
  • Handle with Care: Watch movements are delicate. Avoid touching the gears or electronic components directly with bare hands. Use appropriate tools and handle gently.

Warranty and Support

For any issues or questions regarding your Miyota 1L45 movement, please contact the seller or a certified watch repair center. It is recommended to retain your purchase receipt for any warranty claims.

Miyota movements are renowned for their quality, but proper installation and care are crucial for their longevity.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.