Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the Dooya 52 Gearbox. This gearbox is designed for use with Dooya S Rail and Trietex Rail systems, and is compatible with Dooya DT/KT52, DT/KT320, and DT360 series motors. Please read these instructions carefully before installation to ensure proper function and longevity of your product.

Image: Dooya 52 Gearbox with the 'DOOYA TUBULAR MOTOR' logo, indicating brand and product type.
Setup and Installation
Important: Before proceeding, please identify whether your rail system is a Trietex Rail (Type A) or a Dooya S Rail (Type B). Different tracks require specific gearbox configurations.

Image: A comparison showing the cross-sections of a Trietex Rail (labeled A) and a Dooya S Rail (labeled B), highlighting their distinct profiles.
1. Assembly of Rubber Belt for Curtain Motor
Refer to the detailed diagram for visual guidance during assembly.

Image: A comprehensive diagram illustrating the steps for rubber belt assembly, track folding, and the installation of the curtain motor and its wiring.
1.1. Confirmation of Profiled Material Dimension
- S Track: The length of profiled material = Total length of track - 14.8cm.
- A Track (Trietex Rail): The length of profiled material = Total length of track - 14.8cm.
- Example (S track): If the total length of the track is 2M (200cm), the length of the profiled material should be 200cm - 14.8cm = 185.2cm.
1.2. Confirmation of Rubber Belt Dimension
- S Track: The length of rubber belt = (Total length of track x 2) - 4.5cm.
- A Track (Trietex Rail): The length of rubber belt = (Total length of track x 2) - 5.5cm.
- Example (S track): If the total length of the track is 2M (200cm), the length of the rubber belt should be (200cm x 2) - 4.5cm = 395.5cm.
- Note: When cutting the rubber belt, ensure to cut through the middle of the gear apex.
- When assembling the rubber belt fastening button, leave half a gear at both ends.
- If assembling the rubber belt fastening button at the middle point of the rubber belt, leave one gear at the middle of the two rubber belt fastening buttons.
1.3. General Assembly Steps (Refer to diagram for visual details)
- Place the master carrier overlap arm into the profiled material.
- Place the master carrier overlap arm into the fastening button.
- Place the profiled material into the track.
- Place the lower cover into the upper cover and secure them with screws.
- Cover the upper and lower covers with the respective coverboards.
- Place the upper covers onto both sides of the track.
- Insert the leather belt and gears into the upper covers.
- Place the runners into the track as appropriate.
- Place the connection parts into the lower cover and fasten them using a screwdriver.
Important Note: Please confirm whether you have the old type or new type of hook. The installation steps provided are for the new type. If you have the old type, please assemble the hooks after completing step 9.
2. Folding Method for Joint Track (for easy transit)
2.1. Track Folding
- Locate the overlap arm connected to the two ends of the rubber belt.
- Unscrew the overlap arm and the track connection bracket.
- Push the track connection bracket to one end of the track.
- Gently move the overlap arm main body by hand, simultaneously disengaging the track joint point.
- Carefully fold the track.
2.2. Restoring the Track
- Unfold the track.
- Gently combine the track sections.
- Push the track connection bracket to the joint point.
- Screw the track connection bracket back into place and mount the overlap arm.
- The track restoration is now complete.
3. Installation for Curtain Motor and Cable
- Verify the position of the brackets and fix them at an appropriate location on the track.
- Assemble the curtain motor track at the designated place and secure it with screws.
- Assemble the motor into the gearbox.
- Perform a check to ensure all components are correctly assembled.
- Complete the assembly process.
3.1. Wiring Diagram for Motor Connection
| Wire Color | Function |
|---|---|
| Green/Yellow | Earth |
| Brown | Live 2 |
| Blue | Neutral |
| Black | Live 1 |
| White | Neutral |
| Red | Live 1 |
| Black | Live 2 |
| Green | Earth |
Note: The motor operates at 230V/50Hz, 220V/60Hz, or 120V/60Hz depending on the region.
For further detailed instructions, please refer to the official user manual PDF: Dooya 52 Gearbox User Manual (PDF).
Operation
The Dooya 52 Gearbox facilitates the smooth operation of your curtain motor system. Once installed correctly with a compatible Dooya DT/KT52, DT/KT320, or DT360 motor, the system can be controlled using various types of switches.
Common Switches for Curtain Motors
| Model | Type | Functions |
|---|---|---|
| DC27 | Can bounce switch (mechanic) | Open, Close, Stop |
| DC26 | Can not rebound switch (mechanic) | Open, Close, Stop |
| DC29 | Single manual switch (mechanic) | Open, Close, Stop |
| DC865D | Double manual switch | Open, Close, Stop |
| DC866D | Single manual rebound switch (mechanic) | Open, Close, Stop |
Maintenance
The Dooya 52 Gearbox is constructed from high-quality POM (Polyoxymethylene) material, known for its properties similar to metal, offering excellent wear resistance and low noise operation. This design contributes to the gearbox's durability and generally low maintenance requirements.
General Maintenance Tips:
- Cleaning: Periodically inspect the gearbox and surrounding rail area for dust and debris. Clean with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- Inspection: Regularly check for any signs of wear on the gears or housing. Ensure all screws and fasteners remain tight.
- Lubrication: The POM material is designed for low friction. Additional lubrication is generally not required unless specified in the motor's manual or if unusual noise/resistance is observed. Consult a professional if you suspect lubrication is needed.
- Environmental Conditions: Ensure the operating environment is free from excessive moisture or extreme temperatures, which could affect material integrity over time.

Image: Visual representation of the Dooya 52 Gearbox's advantages, including POM material, wear resistance, silent stability, and tight structure.
Troubleshooting
If you encounter issues with your Dooya 52 Gearbox, consider the following common troubleshooting steps:
- Motor Not Responding:
- Check the power supply to the motor.
- Verify all wiring connections according to the wiring diagram in the Setup section.
- Ensure the control switch is functioning correctly.
- Curtain Movement is Jerky or Slow:
- Inspect the rail for any obstructions or debris.
- Check the rubber belt for proper tension and alignment.
- Examine the gearbox and motor for any visible damage or excessive wear.
- Unusual Noise from Gearbox:
- Ensure all components are securely fastened and there are no loose parts.
- Check for any foreign objects lodged in the gearbox or rail mechanism.
- If the noise persists, contact customer support for further assistance.
- Curtain Does Not Stop at End Limits:
- Refer to your motor's specific manual for instructions on setting or resetting travel limits.
For complex issues or if the problem persists after basic troubleshooting, it is recommended to contact a qualified technician or the seller for support.
Specifications
| Attribute | Detail |
|---|---|
| Model Number | Dooya 52 Gearbox |
| Compatibility | Dooya S Rail, Trietex Rail, Dooya DT/KT52, DT/KT320, DT360 Motors |
| Material | POM (Polyoxymethylene) |
| Dimensions (Approx.) | Length: 9.5 cm (3.7 inches) Width: 5.1 cm (2.0 inches) Height: 4.1 cm (1.6 inches) |
| Battery Included | No |
| Wattage | -- (Gearbox is a mechanical component, wattage depends on the motor) |
| EU LVD Voltage | High voltage: Above 50Vac or 75Vdc (Pertains to compatible motors) |
| High-concerned chemical | None |
| Origin | Mainland China |

Image: Diagram showing the dimensions of the Dooya 52 Gearbox: 9.5cm (3.7inch) length, 5.1cm (2.0inch) width, and 4.1cm (1.6inch) height.
User Tips
- Rail Type Verification: Always double-check the type of curtain rail you have (Trietex Rail or Dooya S Rail) before ordering or installing the gearbox, as different rail types require specific gearbox configurations. Refer to the comparison image in the Setup section.
- Component Matching: Ensure that the gearbox is correctly matched with your specific Dooya motor model (DT/KT52, DT/KT320, DT360) for optimal performance.
- Careful Assembly: Pay close attention to the rubber belt and hook installation steps, especially regarding the 'old type' vs. 'new type' hook distinction, to avoid reassembly.
Warranty and Support
For any questions, technical assistance, or support regarding your Dooya 52 Gearbox, please contact the seller directly. They can provide specific guidance related to your purchase and any potential warranty claims.
Additional item guides and documents, including a detailed user manual in PDF format, are available. You can access the PDF here: Dooya 52 Gearbox User Manual (PDF).
