Introduction
Thank you for choosing the Edifier W210BT Wireless Neckband Earphones. These earphones are designed to provide a high-quality audio experience with convenience and durability. Featuring Hi-Res Wireless audio certification and LDAC codec support, they deliver rich and pure sound. The W210BT also includes AI call noise cancellation for clear communication, an IP55 rating for dust and sweat resistance, and anti-bacterial ear-tips for hygiene. With an 18-hour battery life and low latency mode, they are ideal for music, calls, and gaming on the go.
Setup
1. Charging the Earphones
Before first use, fully charge your Edifier W210BT earphones.
- Connect the provided USB Type-C charging cable to the charging port on the neckband.
- Connect the other end of the cable to a USB power adapter (DC 5.0V / 500 mA recommended) or a computer's USB port.
- The indicator light will show charging status (specific light behavior not provided, assume standard red for charging, off/blue for full).
- A full charge provides approximately 18 hours of playtime.
2. Bluetooth Pairing
To connect your earphones to a device:
- Ensure the earphones are charged and powered off.
- Press and hold the multi-function button (usually the center button) for approximately 5 seconds until the indicator light flashes rapidly (typically blue/red alternating), indicating pairing mode.
- On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
- Select "Edifier W210BT" from the list of found devices.
- Once connected, the indicator light will typically stop flashing and remain solid blue or turn off.
3. Edifier Connect App
Enhance your experience by downloading the Edifier Connect App. The app allows for:
- Battery monitoring
- Auto shutdown settings
- Sleep music features
- Customizing sound effects and other personal preferences.
Operating Instructions
Button Functions
The Edifier W210BT features a convenient three-button control panel on the neckband. Refer to the diagram below for specific functions:
| Action | Function |
|---|---|
| Volume Up (top button) x1 press | Increase Volume |
| Volume Down (bottom button) x1 press | Decrease Volume |
| Multi-function button (center) 3s press | Power On/Off |
| Multi-function button (center) 5s press | Bluetooth Pairing |
| Multi-function button (center) x1 press | Play/Pause Music, Answer/End Call |
| Previous Track (bottom button) x1 press | Previous Track |
| Next Track (top button) x1 press | Next Track |
| Multi-function button (center) x3 press | Activate Voice Assistant |
| Multi-function button (center) x1 press (during incoming call) | Reject Call |
| Multi-function button (center) x2 press | Game Mode On/Off, Switch Call |
AI Call Noise Cancellation
The earphones utilize an AI algorithm to intelligently filter out background noise during phone calls, ensuring clear voice transmission even in noisy environments. This feature is automatically active during calls.
Low Latency Mode for Gaming
Activate the 0.08s low latency mode for a synchronized audio-visual experience, particularly beneficial for gaming. This mode can be toggled using the control buttons (refer to the button functions table).
Maintenance
Cleaning
The Edifier W210BT earphones have an IP55 rating, making them dust and sweat resistant.
- Wipe the earphones and neckband with a soft, dry, or slightly damp cloth after use, especially after workouts.
- The ear-tips and ear fins are designed to be anti-bacterial. For thorough cleaning, gently remove them and wash with mild soap and water, then ensure they are completely dry before reattaching.
- Do not use abrasive cleaners or immerse the earphones in water.
Storage
When not in use, store the earphones in a cool, dry place away from direct sunlight and extreme temperatures. The magnetic earbuds help prevent tangling and secure them around your neck.
Troubleshooting
If you encounter issues with your Edifier W210BT earphones, try the following steps:
- No Power: Ensure the earphones are fully charged.
- Cannot Connect/Pair:
- Make sure Bluetooth is enabled on your device.
- Ensure the earphones are in pairing mode (flashing indicator light).
- Turn off and on the earphones, then try pairing again.
- Clear the Bluetooth pairing history on your device and re-pair.
- Ensure the earphones are within the effective Bluetooth range (typically 10 meters).
- No Sound:
- Check the volume level on both the earphones and your connected device.
- Ensure the earphones are properly connected via Bluetooth.
- Try playing audio from a different application or device.
- Poor Call Quality:
- Ensure the microphone is not obstructed.
- Move to a quieter environment if AI call noise cancellation is struggling with excessive background noise.
Specifications
| Feature | Detail |
|---|---|
| Bluetooth Version | V5.3 |
| Bluetooth Protocol | A2DP, AVRCP, HFP |
| Playtime | Approx. 18 hours |
| Charging Port | USB Type-C |
| Input | DC 5.0V / 500 mA |
| Audio Coding | LDAC, SBC |
| Driver | 10mm dynamic driver |
| Frequency Response | 20Hz-40kHz |
| Output Sound Pressure Level | 94dB±3dBSPL (A) |
| IP Rating | IP55 (Dustproof and Sweatproof) |
| Weight | 32g |
| Material | Plastic |
| Battery Capacity | 125mAh |
| Sound Isolating | Yes |
| Headphone Pads Material | Silicone |
| Impedance Range | Up to 32 Ω |
| Features | Waterproof, With microphone |
| Active Noise-Cancellation | No |
| Volume Control | Yes |
| Control Button | Yes |
| Vocalism Principle | Dynamic |
| Wireless Type | Bluetooth |
| Communication | Wireless |
| Resistance | 24 Ω |
User Tips
- Optimize Sound: Experiment with the different sizes of ear adapters and ear fins provided to find the most comfortable and secure fit. A good seal is crucial for optimal sound quality and bass response.
- App Customization: Don't forget to explore the Edifier Connect App for personalized sound settings, battery status, and other useful features to tailor your listening experience.
- Gaming Advantage: For competitive gaming, remember to activate the low latency mode to minimize audio delay and gain a competitive edge.
- Hygiene: Regularly clean your ear-tips, especially after intense workouts, to maintain hygiene and prolong the life of your earphones.
Warranty and Support
For warranty information, technical support, or further assistance with your Edifier W210BT earphones, please refer to the official Edifier website or contact their customer service directly. Keep your proof of purchase for warranty claims.
