NEWBOLER LIG008 / LIG610 Series

Contents

NEWBOLER Bicycle Light User Manual

Models: LIG008 Series (10000mAh, 8000mAh, 4000mAh) & LIG610 (2000mAh)

1. Safety Warnings

  • Please use a 5V/2A charger. Fast charging is not supported and may damage the device.
  • Do not look directly into the light beam or shine it into the eyes of others, as this may cause temporary vision impairment.
  • When the internal temperature of the bicycle lamp reaches 65 ℃, the lumen output will automatically decrease. This is a normal protective mechanism to prevent battery damage from high temperatures.
  • The device is IPX5 waterproof, meaning it is protected against low-pressure water jets from any direction. However, it is not 100% waterproof. Do not submerge it in water or use it for extended periods in heavy rain.

2. Product Overview

The NEWBOLER Bicycle Light is a versatile and powerful lighting solution for cycling, designed for both mountain biking (MTB) and road cycling. It features a durable aluminum alloy shell, multiple lighting modes, and USB Type-C rechargeable batteries. Some models also include a power bank function for charging other devices.

NEWBOLER Bicycle Light with mounting brackets
NEWBOLER Bicycle Light with mounting brackets.
User Manual cover for LIG610 model
User Manual cover for LIG610 model.

3. Specifications

Below are the detailed specifications for the NEWBOLER Bicycle Light series:

NEWBOLER Bicycle Light Specifications
FeatureLIG008-10000mAhLIG008-8000mAhLIG008-4000mAhLIG610-2000mAh
MaterialAluminum Plastic Shell
Waterproof LevelIPX5
Voltage5V/2A
LEDP9*5TG3 LED*3
Lumens (Max)6000 Lumen3000 Lumen2000 Lumen
Battery Capacity10000 mAh8000 mAh4000 mAh2000 mAh
Charging Time~10 hrs~9 hrs~4.5 hrs~3 hrs
Working Time3-8.5 hrs2.5-7.5 hrs2.5-4.5 hrs2-3.5 hrs
Range200-500M150-300M~200M
Power Bank FunctionYESYESYESNO
Lighting Modes4 Modes5 Modes
Weight (LIG008)150g145g
Size (LIG008)164*45*38mm91*41*30mm
Detailed specifications for LIG008 bicycle light
Detailed specifications for LIG008 bicycle light.

LIG305 Bicycle Taillight Specifications (if included)

FeatureSpecification
MaterialABS shell
Weight55g
Size70*20*20mm
ColorRed
Lumens (Max)30 lumens
Battery210mAh
Battery Life4-8h
Charging MethodUSB charging port
Charging Time1-1.5 hours
Lighting ModesAlternating slow flash, full light flash, alternating fast flash, normally on
LIG305 Taillight product information and dimensions
LIG305 Taillight product information and dimensions.

4. Installation

Front Light Installation

The bicycle light comes with two types of brackets: a normal bracket and an extend bracket, allowing for flexible mounting on handlebars with diameters between 22.2mm and 33mm.

  1. Choose the appropriate bracket (normal or extend) for your handlebar setup.
  2. Attach the bracket to your bicycle handlebar. Ensure it is securely tightened.
  3. Slide the bicycle light onto the bracket until it clicks into place.
  4. Adjust the angle of the light to ensure optimal illumination of the path ahead.
Diagram showing steps to install the bicycle front light bracket
Steps for installing the bicycle front light bracket.
Image of the normal bracket for handlebar mounting
Normal bracket for handlebar mounting.
Image of the extend bracket for handlebar mounting
Extend bracket for handlebar mounting.

Taillight Installation (if included)

  1. Attach the silicone strap to the taillight bracket.
  2. Secure the taillight bracket to your bicycle's seat post using the silicone strap.
  3. Ensure the taillight is facing backward and is securely fastened. The taillight is 360° adjustable.
Diagram showing steps to install the bicycle taillight
Steps for installing the bicycle taillight.

5. Operation

Front Light Modes (LIG008 Series)

Press the ON/OFF button to cycle through the following 4 modes:

  • Near Light: Provides a wide, close-range beam for general visibility.
  • High Beam Bright: Offers a powerful, focused beam for maximum distance illumination.
  • Far and Near Full Light: Combines both near and high beams for comprehensive coverage.
  • Flashing: A pulsating light mode for increased visibility during the day or in low-light conditions.
Comparison of different brightness modes: High Beam, Low Beam, High Light
Comparison of different brightness modes: High Beam, Low Beam, High Light.
Image showing the Near Light mode illumination
Near Light mode illumination.
Image showing the High Beam Bright mode illumination
High Beam Bright mode illumination.
Image showing the Far and Near Full Light mode illumination
Far and Near Full Light mode illumination.
Image showing the Flashing mode
Flashing mode.

Front Light Modes (LIG610 Model)

The LIG610 model features 5 modes:

  • Click to open: Cycle through Near Light, Far Light, Far and Near Full Light, and Flicker modes with short presses.
  • Long press to open: Activates the Daytime Running Light mode.

Anti-glare Design

The front light features a cut-off line design to prevent dazzling oncoming pedestrians or cyclists, enhancing safety for everyone on the road.

Comparison of anti-glare bicycle light vs. other bike lights
Comparison of anti-glare bicycle light vs. other bike lights, showing the cut-off line.

Taillight Modes (LIG305)

The LIG305 taillight offers the following lighting modes:

  • Alternating slow flash
  • Full light flash
  • Alternating fast flash
  • Normally on

6. Charging

The NEWBOLER Bicycle Light is USB Type-C rechargeable. Use a standard 5V/2A charger for optimal charging. Fast chargers are not supported.

  • Connect the provided USB Type-C cable to the charging port on the light and to a compatible USB power source.
  • Indicator Light Status:
    • Low battery: Flashing blue light
    • Fully charged: Solid blue light
  • Refer to the specifications table for approximate charging times for each model.
USB Type-C charging for the bicycle light, showing indicator lights
USB Type-C charging for the bicycle light, showing indicator lights.

7. Power Bank Function (LIG008 Series Only)

The LIG008 series bicycle lights can also function as a power bank, providing a 5V/1A output to charge your mobile phone or other small electronic devices.

  • Locate the USB output port on the bicycle light.
  • Connect your device's charging cable to the USB output port on the bicycle light.
  • The light will begin charging your device.
Bicycle light acting as a power bank, charging a smartphone
Bicycle light acting as a power bank, charging a smartphone.

8. Maintenance

  • Cleaning: Wipe the light with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Storage: Store the light in a cool, dry place when not in use. Avoid extreme temperatures.
  • Battery Care: For optimal battery life, charge the light regularly, even if not used frequently. Avoid fully discharging the battery for extended periods.
  • Water Exposure: While IPX5 rated, avoid prolonged exposure to water. If the light gets wet, dry it thoroughly before charging or using.
Bicycle light being sprayed with water, demonstrating IPX5 waterproof rating
Bicycle light being sprayed with water, demonstrating IPX5 waterproof rating.

9. Troubleshooting

  • Light not turning on: Ensure the battery is charged. Press and hold the power button for a few seconds to activate.
  • Light output decreases: This is a normal safety feature if the internal temperature reaches 65 ℃. Allow the light to cool down.
  • Not charging: Ensure the charging cable is securely connected and the charger is 5V/2A. Check the charging indicator light.
  • Power bank function not working: Ensure the bicycle light has sufficient charge. Some models (LIG610) do not support power bank functionality.

10. User Tips

  • For night riding, consider using the 'Far and Near Full Light' mode for maximum visibility and a wide flood beam, as this provides both close-range and distant illumination.
  • To extend battery life during longer rides, use lower lumen modes when possible and reserve the highest brightness for critical situations.
  • Always ensure the light is securely mounted to prevent it from falling off during rides.

11. Frequently Asked Questions (FAQ)

Q: How bright is this light, and does it provide wide and flood illumination for night riding? What about battery life?
A: The NEWBOLER bicycle lights offer various lumen outputs, up to 6000 lumens for LIG008 models, providing excellent brightness. The 'Far and Near Full Light' mode is designed to offer both wide (flood) and focused (spot) illumination, ideal for comprehensive visibility during night riding. Battery life varies by model and mode, ranging from 2 to 8.5 hours. Refer to the 'Specifications' section for detailed battery life per model.

12. Product Demonstration Video

Product demonstration video showcasing the NEWBOLER bicycle light's features, installation, and waterproof capabilities.

13. Additional Resources

For more detailed information, including warranty terms and comprehensive support, please refer to the official user manual PDF:

View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.