Introduction
Thank you for choosing the SUPERFIRE MI80-S High Power LED Flashlight. This device is designed with high-quality materials, featuring an aerospace-grade aluminum alloy body and a high-power LED for intense illumination with low power consumption. It is suitable for a wide range of applications including hiking, climbing, fishing, patrol, inspection, and survival.
Warning: This flashlight produces a high-intensity beam. Do not point directly at anyone's face or look directly into the beam, as this may cause temporary blindness.
Product Structure
The SUPERFIRE MI80-S flashlight is designed for durability and ease of use. Below is a diagram illustrating its main components:

- Waterproof Ring: Ensures water resistance.
- Lens: Protects the LED and focuses the light.
- Reflector Cup: Directs the light from the LED.
- High-power LED: The light source.
- Radiating Rings: Aid in heat dissipation.
- Aluminum Alloy Body: Durable and lightweight casing.
- 18650 Battery: Power source (note: some models may use 21700 battery).
- Tail Switch: For operation and mode selection.
Setup
Battery Installation
- If present, please remove any transparent plastic film from the battery. Do not break the battery wrap (with colors and letters on it). If the battery wrap is broken, do not use it and contact customer service immediately.
- Insert the battery into the flashlight with the positive end (+) pointing towards the head (LED side) of the flashlight, and the negative end (-) pointing towards the tail switch, as shown in the diagram below.

Note: This flashlight uses an 18650 battery (or 21700 for MI80-S 3000mAh version). Please use original batteries and chargers. Using unsupported batteries may cause damage.
Operating Instructions
Power On/Off and Mode Selection
The flashlight features a single rubber push button at its base for all operations.
- To Turn On/Off: Press the tail switch firmly.
- To Change Modes: While the flashlight is on, press the tail switch lightly to cycle through the different lighting modes.
Lighting Modes
The MI80-S offers 5 lighting modes to suit various situations:

- Low: Soft light, ideal for night reading or checking on children.
- Medium: Stable illumination for night hiking or setting up camp.
- High: Powerful 1100 lumens for safety assurance and wilderness search.
- Strobe: For signaling or disorienting.
- SOS: Emergency signaling mode (Morse Code).
Charging the Battery
The battery can be charged using a dedicated battery charging compartment (charger).
Charging Indicator:
- Red light: Indicates the battery is currently charging.
- Blue light: Indicates the battery is fully charged.
Important: Use a 5V/1A charger. Fast charging chargers are not supported. Recharge the battery as soon as possible when the indicator light shows low power.
Maintenance
Battery Care
- Always use the original battery and charger.
- The battery has no memory effect, so it can be recharged at any time.
- If the battery is not used for a long time, recharge and discharge it every 3 months to maintain its condition.
- Keep the battery away from water, moisture, and drops.
Flashlight Care
- Ensure correct battery insertion to prevent damage.
- Avoid constant exposure to sunlight, water, chemicals, or corrosive gases to prevent oxidation of the flashlight's surface.
- Apply Vaseline oil frequently to the screwing parts inside the flashlight to maintain the waterproof O-ring and ensure smooth rotation.
- Keep the lens clean for clear and bright illumination.
- When storing for a long period, remove the battery and store the flashlight in a dry, room-temperature, and non-corrosive environment.
Troubleshooting
If you encounter issues with your SUPERFIRE MI80-S flashlight, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Flashlight does not turn on. | Incorrect battery installation, low battery, or insulating sheet/film not removed. | Ensure battery is inserted correctly (positive end towards head). Charge the battery. Remove any white insulating sheet or transparent protective film from the battery. |
| Battery not charging normally. | Using an unsupported charger, or insulating film not removed. | Use a 5V/1A charger (fast chargers are not supported). Ensure all insulating films are removed from the battery. |
| Dim or flickering light. | Low battery, loose connections, or dirty lens. | Charge the battery. Tighten all parts of the flashlight. Clean the lens. |
| Beam pattern is not uniform (grid shadow, deformed flowering). | Inherent characteristic of the reflector design. | This is a known characteristic for some users and generally does not affect the flashlight's primary function of lighting. |
If problems persist, please contact your dealer or SUPERFIRE customer support.
Specifications
The following table details the technical specifications of the SUPERFIRE MI80-S flashlight:

| Feature | Specification |
|---|---|
| Model | MI80-S |
| Power | 15W |
| Lumen | 780LM (High Beam: 1100LM) |
| Lighting Mode | 5 Modes (Low, Medium, High, Strobe, SOS) |
| Battery Voltage | 3.7V |
| Max Lighting Distance | About 180M |
| Runtime | About 5.5H |
| Lamp Bead Type | SH-U19 |
| Charging Interface Type | AC16 (External Charger) |
| Battery | 21700/3000mAh (Note: Some models may use 18650 battery) |
| Waterproof Class | IP44 |
| Material | Aluminium Alloy |
| Weight | 80g |
| Anti-Drop Height | 1M |
| Product Size | 128*28*28mm |
Key Features Summary
- 100,000 hours LED life
- High capacity long life lithium battery
- High intensity beam
- Aerospace grade aluminium construction
User Tips
- Beam Quality: While the flashlight is very bright, some users have noted a visible grid shadow or deformed flowering in the center of the beam. This is generally considered acceptable for general-purpose lighting but may not suit users who are particular about beam quality.
- Heat Generation: The flashlight can get warm on higher settings. Avoid running it on the brightest setting for extended periods to prevent excessive heat.
- Battery Options: If purchasing the "Without battery" option, ensure you acquire a compatible 18650 or 21700 battery from a reputable source. The seller recommends using their batteries for optimal performance.
- Charging Port: Note that this model typically lacks a built-in charging port and requires an external charger for the battery.
- Lanyard: The flashlight comes with a lanyard for easy carrying and to prevent drops.
- Glow-in-the-Dark Feature: Some units may feature a luminous ring (luminescent phosphor) near the LED that glows faintly green after the flashlight is turned off, adding a unique visual effect.
- Mode Memory: The flashlight typically does not have mode memory and will always turn on in the low mode.
Warranty and Support
Warranty Information
All SUPERFIRE flashlights purchased from our company are covered by a 1-year manufacturer's warranty for quality problems. The warranty period for the battery and charger is 3 months from the date of purchase.
The warranty does not cover problems caused by personal actions or unreasonable usage.
If you experience any quality problems, please contact your dealer or SUPERFIRE customer support. You may be required to send the product back along with proof of purchase.
For further assistance, you can refer to the User Manual (PDF) for additional details.
Contact Support
Should you have any questions or require support, please contact your dealer or the SUPERFIRE Lighting Official Store directly.