Bakon BK906

Contents

Bakon BK906 Soldering Iron Handle User Manual

Model: BK906 | Brand: Bakon

1. Introduction

The Bakon BK906 Soldering Iron Handle is an original accessory designed for use with Bakon BK60, BK90, and BK881 soldering stations. This handle incorporates advanced heating technology and ergonomic design to provide efficient and reliable soldering performance. It features a lightweight build, rapid heating capabilities, and a durable construction for extended use in various electronic repair and assembly tasks.

Bakon BK906 Soldering Iron Handle connected to a soldering station

Figure 1: Bakon BK906 Soldering Iron Handle

2. Key Features

  • High-Frequency Eddy Current Heating Technology: The heating core is made of pure silver wire, ensuring strong power and rapid temperature recovery for efficient soldering.
  • Diagram illustrating high-frequency eddy current heating technology with sensing core and electromagnetic heating

    Figure 2: High-Frequency Eddy Current Heating Diagram

  • Pure Silicone Protective Sleeve: Provides a soft grip and enhanced resistance to high temperatures, improving user comfort and safety.
  • Close-up of the pure silicone protective sleeve on the soldering iron handle

    Figure 3: Silicone Protective Sleeve

  • Seven-Hole Connector: Specifically designed for seamless compatibility with Bakon BK60, BK90, and BK881 soldering stations.
  • Close-up of the seven-hole connector on the soldering iron handle

    Figure 4: Seven-Hole Connector

  • Special Tail Design: Engineered to be more flexible and resistant to breakage, enhancing the handle's durability.
  • Image showing the special tail design of the soldering iron handle for improved flexibility

    Figure 5: Special Tail Design

  • Lightweight and Ergonomic: Weighing approximately 105g, it reduces user fatigue during prolonged operation.
  • Pluggable Heating Element: Allows for easy and quick replacement of the heating element, minimizing downtime.
  • Disassembled view of the soldering iron handle showing the plug-in heating element and tip

    Figure 6: Pluggable Heating Element

  • Optimized Heat Transfer: The heating core sensor is in close contact with the soldering iron tip, reducing heat loss and ensuring sensitive temperature control.
  • Durable Ceramic Inner Core: The metal sleeve filled with a ceramic inner core contributes to a longer service life and rapid temperature rise.

3. Specifications

FeatureSpecification
Model NumberBK906
WeightApprox. 105g
Heating CoreBK1380
Applicable Soldering StationBK60, BK90, BK881
Handle Cord LengthApprox. 1.1 meters (soft PVC cord)
Suitable Soldering Iron TipBK600
Temperature Stability±2°C
Resistance of Soldering Iron Tip to Ground<2Ω
Potential of Soldering Iron Tip to Ground<2mV
SizeL85mm x D4.4mm
Use Voltage24VAC
Heating Resistance2.8Ω ±8% (at 23℃±2℃)
Pressure Test1500vAC, 1 Second, leakage current not more than 5mA (at 23℃±3℃)
Insulation ResistanceNot less than 1 x 10 ohm (at 500VDc, 23℃±3℃)
CertificationCE
OriginMainland China

4. Setup Instructions

  1. Compatibility Check: Ensure your soldering station is a Bakon BK60, BK90, or BK881 model, as the BK906 handle is designed for these specific units.
  2. Connecting the Handle: Locate the 7-pin socket on your compatible Bakon soldering station. Align the 7-pin connector of the BK906 handle with the socket and gently push it in until it clicks securely into place.
  3. Video 1: Demonstrates connecting the 7-pin socket and auto-start for the soldering station.

  4. Installing/Replacing the Heating Element and Tip:
    1. Unscrew the retaining nut at the base of the soldering iron tip.
    2. Carefully pull out the existing heating element and tip assembly.
    3. Insert the new plug-in heating element (BK1380) into the handle, ensuring it seats correctly.
    4. Place the desired soldering iron tip (e.g., BK600) onto the heating element.
    5. Secure the assembly by screwing the retaining nut back into place.
  5. Video 2: Shows the plug-in heating element replacement process.

  6. Initial Power-Up: Once the handle is securely connected, power on your soldering station. The station should automatically detect the handle and initiate heating.

5. Operating Instructions

  1. Temperature Setting: Use the controls on your Bakon soldering station to set the desired temperature for the BK906 handle. Refer to your soldering station's manual for specific temperature adjustment procedures.
  2. Rapid Heating: The high-frequency eddy current heating technology ensures the handle reaches the set temperature quickly.
  3. Soldering: Once the desired temperature is reached, the handle is ready for use. Apply solder to the joint, ensuring proper contact between the tip, component, and pad.
  4. Automatic Sleep Function: When placed in a compatible iron holder (such as the BK512 iron holder, if your station includes one), the soldering station may feature an automatic sleep function to conserve energy and prolong tip life.
  5. Video 3: Illustrates the auto-start for the soldering station and the use of the BK512 iron holder.

6. Maintenance

  1. Tip Cleaning: Regularly clean the soldering iron tip using a damp sponge or brass wool (often found in iron holders like the BK512) to remove excess solder and oxidation. This maintains optimal heat transfer and extends tip life.
  2. Heating Element Replacement: The plug-in heating element is designed for easy replacement. If you notice a significant drop in heating performance or temperature stability, replace the heating core as described in the Setup section.
  3. Handle Cord Care: The soft PVC handle cord is designed for durability. Avoid sharp bends or excessive pulling to prevent damage.
  4. General Cleaning: Keep the handle and connector free from dust and debris. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.

7. Troubleshooting

No Heat or Insufficient Heat:
  • Ensure the 7-pin connector is fully and securely inserted into the soldering station.
  • Check if the soldering station is powered on and set to the correct temperature.
  • Inspect the heating element and tip for visible damage. Replace if necessary.
  • Verify that the heating core sensor is in close contact with the soldering iron tip.
Unstable Temperature:
  • Ensure the tip is clean and properly tinned.
  • Check the connection of the handle to the station.
  • The soldering station may require temperature compensation, which can often be adjusted via software settings on the station itself.
  • Video 4: Shows temperature testing and compensation capabilities of a Bakon soldering tester.

Handle Feels Loose:
  • Tighten the retaining nut that secures the tip and heating element assembly.
  • Ensure the 7-pin connector is fully engaged.

8. User Tips

  • Tin Your Tip: Always tin the soldering iron tip with a small amount of solder before and after each use. This prevents oxidation and ensures efficient heat transfer.
  • Choose the Right Temperature: Use the lowest effective temperature for your soldering task to protect components and prolong tip life.
  • Keep it Clean: A clean tip is crucial for good solder joints. Regularly wipe the tip on a damp sponge or brass wool.
  • Proper Storage: When not in use, place the handle in its designated holder to activate the auto-sleep function and prevent accidental burns or damage.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your complete Bakon soldering station or contact your authorized Bakon dealer. Keep your purchase receipt as proof of purchase for any warranty claims.

© 2023 Bakon. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.