Introduction
This manual provides detailed instructions for the safe and efficient operation of your Radtel RT-490 Six Band Amateur Ham Radio. The RT-490 is a versatile two-way radio designed for amateur use, featuring six frequency bands, 256 channels, and AM air frequency reception. Please read this manual thoroughly before using your radio to ensure proper functionality and to familiarize yourself with all its features.
Package Contents
Carefully unpack your Radtel RT-490 and verify that all items listed below are present and in good condition. If any items are missing or damaged, please contact your retailer.
- 1 x Radtel RT-490 Radio Unit (None GPS/Bluetooth Version)
- 1 x Li-ion Battery Pack with USB-C Charging Port
- 1 x AC Power Adapter (US or EU type, depending on region)
- 1 x Desktop Charger Cradle
- 1 x Dual Band Antenna
- 1 x Belt Clip
- 1 x User Manual (English)
Product Overview
Familiarize yourself with the various parts and controls of your RT-490 radio.
Controls and Display
| Component | Description |
|---|---|
| Antenna | Transmits and receives radio signals. |
| Selector On/Off Volume Knob | Rotates clockwise to power on and increase volume; counter-clockwise to decrease volume and power off. |
| PTT (Push-To-Talk) Button | Press and hold to transmit, release to receive. (Side Key 1) |
| Side Keys (PF2, PF3) | Programmable function keys. Default functions include FM Radio, Monitor, TX Power, Scan. |
| SOS/Alarm Key | Orange button near the antenna. Long press to activate SOS function, short press or PTT to exit. |
| LCD Display | Large color screen displaying frequency, channel name, status icons, and menu options. |
| Keypad | Alphanumeric keys for frequency input, channel selection, and menu navigation. |
| Menu Key | Used to enter and confirm menu selections. |
| Navigation Keys (Up/Down/Left/Right) | Used to navigate through menus and adjust settings. |
| Exit/Cancel Key | Used to cancel input or exit from menus. |
| Microphone | For voice input during transmission. |
| Status LED | Red indicates transmission (TX), Green indicates reception (RX). |
| Accessory Jack | For connecting programming cables, external microphones, or headsets. |
Setup
1. Battery Installation
To install the battery:
- Ensure the radio is powered off.
- Align the battery pack with the battery compartment on the back of the radio.
- Gently push the battery into place until it clicks securely.
- To remove, slide the battery release latch (if present) and pull the battery out.
2. Antenna Attachment
Screw the dual-band antenna clockwise onto the connector on top of the radio until it is finger-tight. Do not overtighten.
3. Charging the Battery
The RT-490 battery can be charged using the provided desktop charger or directly via its USB-C port.
- **Using the Desktop Charger:**
- Connect the AC power adapter to the desktop charger cradle.
- Plug the AC adapter into a wall outlet.
- Place the radio (with battery installed) into the charger cradle. Ensure the charging contacts align.
- The charging indicator light on the cradle will show the charging status (e.g., red for charging, green for fully charged).
- **Using the USB-C Port:**
- Connect a USB-C cable (not included, but compatible with the battery's port) to the battery's USB-C charging port.
- Connect the other end of the USB-C cable to a compatible USB power source (e.g., a USB wall adapter, computer USB port).
- The battery has an internal charging circuit and indicator.
Note: Fully charge the battery before initial use for optimal performance.
Operating Instructions
1. Power On/Off and Volume Control
To power on the radio, rotate the Selector On/Off Volume knob clockwise. Continue rotating clockwise to increase the volume. To decrease volume, rotate counter-clockwise. To power off, rotate the knob fully counter-clockwise until it clicks.
2. Frequency Bands
The Radtel RT-490 supports six frequency bands:
- 136-180MHz (Transmit/Receive)
- 200-260MHz (Transmit/Receive)
- 350-400MHz (Transmit/Receive)
- 400-520MHz (Transmit/Receive)
- 108-136MHz (AM Receive Only) - Aviation Band
- 66-108MHz (FM Receive Only) - Commercial FM Radio Broadcast
3. Keypad Functions
The keypad allows for direct frequency input, channel selection, and access to various functions.
- **P1 Key:**
- Short Press: Toggles between VFO A and VFO B.
- Long Press (in memory mode): Switches between frequency, name, and channel number display.
- **P2 Key:**
- Short Press: Changes between VFO mode and channel memory mode.
- Long Press: Activates/deactivates the ANI (Automatic Number Identification) display function.
- **Menu Key:** Press to enter the main menu. Use navigation keys to select options, then press Menu again to confirm.
- **Navigation Keys (Up/Down/Left/Right):**
- Short Press: Navigates through menu options or adjusts values.
- Long Press: Quickly changes menu options or scan direction.
- **Exit/Cancel Key:** Cancels current input or exits the current menu.
- **Numeric Keypad (0-9):** Used for direct frequency input, channel number entry, and DTMF tone generation.
- **`*` Key:**
- Short Press: Cycles between "reverse", "talk around", and normal modes.
- Long Press: Initiates frequency scanning.
- **`#` Key:**
- Short Press: Enters DTMF tones. Use `*` to end if less than 6 digits, then press PTT to send.
- Long Press: Locks or unlocks the keypad.
- **SOS/Alarm Key (Orange Button):** Long press to activate SOS function, short press or PTT to exit SOS.
4. Menu Navigation and Functions
To access the radio's advanced features, use the Menu key to enter the main menu. The menu structure is as follows:
- Press the Menu key.
- Use the Up/Down Navigation Keys to scroll through the menu options.
- Press Menu again to select an option.
- Use the Up/Down Navigation Keys to adjust the setting or select a sub-option.
- Press Menu to confirm your selection.
- Press the Exit/Cancel Key to exit the menu and return to normal operation.
Key Functions Overview:
- **SQL (Squelch Level):** Adjusts the receiver sensitivity (0-9). Higher levels require stronger signals to open the squelch.
- **STEP (Frequency Step):** Sets the tuning increment for VFO mode (e.g., 2.5K, 5K, 6.25K, 10K, 12.5K, 20K, 25K, 50K).
- **MEMCH (Memory Channel):** Stores or recalls channels (000-256). The RT-490 has 256 memory channels.
- **DELCH (Delete Channel):** Deletes a specified memory channel (000-256).
- **R-CTCSS/T-CTCSS (Receive/Transmit CTCSS):** Sets Continuous Tone-Coded Squelch System tones (67.0Hz-254.1Hz) for privacy and interference reduction.
- **R-DCS/T-DCS (Receive/Transmit DCS):** Sets Digital Coded Squelch codes (DO23N-D7541).
- **TOT (Time Out Timer):** Prevents accidental long transmissions by limiting TX time (30s, 60s, etc.).
- **TXP (Transmit Power):** Selects High (H) or Low (L) transmit power.
- **SAVE (Battery Save):** Activates power-saving modes (Normal, Super, Deep) to extend battery life.
- **VOX (Voice Operated Transmit):** Allows hands-free transmission when voice is detected. Adjustable sensitivity levels (1-9).
- **W/N (Wide/Narrow Band):** Selects wide or narrow band operation.
- **LANGUAGE:** Sets the display language (English, Chinese).
- **BCL (Busy Channel Lockout):** Prevents transmission on an occupied channel.
- **SCAN (Scanning):** The radio supports three scanning methods:
- **TO (Time Operation):** Stops scanning for a set time when a signal is detected, then resumes.
- **CO (Carrier Operation):** Stops scanning when a signal is detected and remains on that frequency until the signal disappears.
- **SE (Search Operation):** Stops scanning when a signal is detected and remains on that frequency.
- **FM Radio:** Accesses the commercial FM broadcast band (66-108MHz).
- **DTMF (Dual-Tone Multi-Frequency):** For sending signaling tones.
- **ANI (Automatic Number Identification):** Displays the radio's ID.
- **AUTOLOCK (Automatic Keypad Lock):** Automatically locks the keypad after a set time.
- **MDF-A/MDF-B (Multi Display Function A/B):** Configures what information is shown on the A and B bands of the display (Frequency, Channel Number, Channel Name).
- **TDR (Dual Watch):** Monitors two frequencies simultaneously.
- **RESET:** Resets the radio to factory default settings (VFO or ALL).
5. FM Radio Function
To use the commercial FM radio broadcast function:
- Activate the FM function via a programmable side key (PF2 or PF3). The display will show the current FM frequency.
- Use the Up/Down navigation keys or the numeric keypad to change the frequency (65-108MHz).
- To automatically scan for FM stations, press the `*` key (if programmed for this function).
- Adjust the volume using the Selector On/Off Volume knob.
- To exit FM mode, press the designated FM function key again.
6. DTMF Encoding
The RT-490 supports DTMF tone generation:
- **Quick DTMF:** Press and hold the PTT button, then use the numeric keys (`0-9`, `*`, `#`) to input the desired DTMF sequence. Release PTT to transmit.
- **DTMF After Editing:**
- In standby mode, press the `#` key to enter the DTMF editing menu.
- Input the DTMF sequence using the numeric keypad. If less than 6 digits, press `#` to finish editing.
- Press the PTT button to transmit the edited DTMF sequence.
- To delete the encoding, press the Exit/Cancel key. To exit the DTMF editing mode, press the Exit/Cancel key again.
7. GPS Function (Not Available on This Model)
Please note that this specific Radtel RT-490 model is designated as "None GPS" and does not include GPS functionality. If you have a GPS-enabled version of the RT-490, you would typically access GPS features by pressing the Right Navigation Key to enter the GPS interface. This interface would display coordinates, allow for return-to-origin functions, and provide real-time direction and distance information.
8. Programming the Radio
The Radtel RT-490 can be programmed using PC software.
PC Software (CPS) Programming
The RT-490 can be programmed using dedicated PC software (CPS - Customer Programming Software) for Windows. This software allows for comprehensive customization of channels, frequencies, and various radio settings.
- Download the free RT-490 programming software from the official Radtel website: https://www.radtels.com/pages/software-download.
- Locate the ZIP file (e.g., "Radtel RT-490 6 Bands Radio Software") and extract its contents.
- Run the installer (e.g., "mysetup.exe") to install the "Multiband" CPS software on your Windows PC.
- Connect your RT-490 radio to your PC using a compatible programming cable (sold separately).
- Launch the "Multiband" software and follow the on-screen instructions to read/write radio data.
Bluetooth Programming (Not Available on This Model)
This specific Radtel RT-490 model is designated as "None Bluetooth" and does not support Bluetooth programming. For models that include Bluetooth functionality, programming can typically be done wirelessly via an Android smartphone app:
- Download the "Super Walkie-Talkie" app from the Android Play Store or Radtel's website.
- Enable Bluetooth on your radio (Menu #51) and your smartphone.
- Pair your smartphone with the radio (look for a "walkie-talkie" device).
- Open the "Super Walkie-Talkie" app and connect to the radio to begin wireless programming.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | Radtel |
| Model Number | RT-490 |
| Frequency Range | 6 Bands: 136-180MHz (TX/RX), 200-260MHz (TX/RX), 350-400MHz (TX/RX), 400-520MHz (TX/RX), 108-136MHz (AM RX), 66-108MHz (FM RX) |
| Storage Channels | 256 |
| Output Power | 3W-5W |
| Battery Capacity | 2000mAh USB-C Li-ion Battery |
| Battery Included | Yes |
| Rechargeable Battery Included | Yes |
| Walkie Talkie Type | Portable |
| Material | Metal |
| Display | Yes (Color LCD) |
| Waterproof / Water-Resistant | No |
| Maximum Range | 3km-5km |
| GPS Functionality | No (None GPS version) |
| Bluetooth Functionality | No (None Bluetooth version) |
| Origin | Mainland China |
Troubleshooting
If you encounter issues with your Radtel RT-490, please refer to the following common problems and solutions:
| Problem | Possible Cause / Solution |
|---|---|
| Radio does not power on | Battery is low or not installed correctly. Charge the battery or re-install it. Ensure the volume knob is rotated clockwise past the 'off' click. |
| Cannot transmit (TX) |
|
| Cannot receive (RX) |
|
| Keypad is unresponsive | Keypad lock is active. Long press the `#` key to unlock. |
| Poor audio quality |
|
If the problem persists after trying these solutions, consider performing a factory reset (Menu #53, "ALL" option). Note that this will erase all custom settings.
User Tips
- **USB-C Charging:** The included battery pack features a convenient USB-C charging port, allowing you to charge it directly with a standard USB-C cable and power source, in addition to the desktop charger. This offers flexibility for charging on the go.
- **Programmable Side Keys:** Utilize the PC programming software to customize the side keys (PF2, PF3) for frequently used functions like FM radio, monitor, or transmit power adjustment. This can significantly improve ease of use during operation.
- **Channel Naming:** When programming channels via the PC software, take advantage of the channel naming feature. Assigning descriptive English names to your channels makes it much easier to identify and select contacts or specific frequencies.
Support & Documentation
For further assistance or detailed technical information, please refer to the official user manual PDF. This document contains comprehensive guides and diagrams that may not be fully covered in this summary.
**Official User Manual (PDF):** You can access the full user manual in PDF format at: Radtel RT-490 User Manual (PDF)