Haswing Protruar G Electric Trolling Motor

1. Introduction

Thank you for choosing the Haswing Protruar G Transom Mount Electric Trolling Motor. This manual provides essential information for the safe operation, installation, maintenance, and troubleshooting of your new trolling motor. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

2. Specifications

The following table outlines the key technical specifications for the Haswing Protruar G Trolling Motor:

3. Key Features

• Brushless Motor with Gear Box: Provides efficient and powerful propulsion.
• Stepless Speed Control: Digital technology offers smooth, precise forward and reverse speed adjustments.
• 7-Level Tilting Position: Allows for easy adjustment of the motor's angle to suit various water depths and conditions.
• Folding Handle: The tiller handle features a 100° folding function for convenient storage and transport.
• 5-Level Battery Power Display: Integrated display on the motor head shows current battery charge status.
• Prop-Clutch: Designed to break away when the propeller is blocked, preventing damage to the prop and motor.
• Kill Switch: For immediate power cut-off in emergencies, enhancing safety.

4. Safety Information

Always prioritize safety when operating your trolling motor. Failure to follow safety guidelines can result in injury or damage to equipment.

• Read and understand all instructions before use.
• Always wear a personal flotation device (PFD) when on the water.
• Ensure the kill switch lanyard is properly attached to the operator before starting the motor.
• Keep hands, feet, and clothing clear of the propeller at all times, especially when the motor is running.
• Do not operate the motor if the propeller is damaged or obstructed.
• Ensure all electrical connections are secure and waterproof.
• Use only recommended battery types (2 x 105AH deep cycle battery for 24V operation).
• Avoid operating the motor in shallow water where the propeller may strike obstacles.

5. Setup

Follow these steps to set up your Haswing Protruar G trolling motor:

1. Unpacking: Carefully remove all components from the packaging. Verify that all parts are present according to the packing list.



2. Mounting: Attach the motor to the transom of your boat using the integrated transom mount bracket. Ensure the bracket is securely tightened to prevent movement during operation.
3. Battery Connection: Connect the motor to a 24V power source using two 105AH deep cycle batteries (not included). Ensure correct polarity (+ to + and - to -) and secure all connections. It is recommended to use an inline fuse for protection.
4. Shaft Depth Adjustment: Adjust the motor shaft depth using the depth collar to ensure the propeller is submerged at an appropriate level, avoiding hitting the bottom or operating too close to the surface.
5. Kill Switch Attachment: Securely attach the kill switch lanyard to the designated point on the motor and to the operator.

6. Operating Instructions

Once the motor is properly set up, follow these steps for operation:

1. Pre-Operation Check: Before starting, ensure the propeller is clear of obstructions and the motor is fully submerged.
2. Engage Kill Switch: Ensure the kill switch lanyard is properly connected.
3. Power On: Turn the tiller handle to the desired speed setting. The motor features stepless forward and reverse speed control for precise maneuvering.
4. Steering: Use the tiller handle to steer the boat. The motor offers 360° lockable steering for full control.
5. Tilting: If needed, adjust the motor's tilt angle using the 7-level tilting mechanism to navigate different water depths or to lift the motor out of the water.
6. Monitoring Battery: Regularly check the 5-level battery power display on the motor head to monitor your remaining charge.
7. Stopping the Motor: To stop, return the tiller handle to the neutral position. In an emergency, pull the kill switch lanyard.

7. Maintenance

Regular maintenance will extend the life and performance of your trolling motor:

• After Each Use: Rinse the motor with fresh water, especially after use in saltwater, to prevent corrosion. Wipe down all surfaces.
• Propeller Inspection: Periodically inspect the propeller for weeds, fishing line, or damage. Clear any obstructions. If the propeller is damaged, replace it.
• Battery Care: Keep batteries charged and clean. Store them in a cool, dry place. Follow battery manufacturer's guidelines for charging and maintenance.
• Electrical Connections: Check all electrical connections for corrosion or looseness. Clean and tighten as necessary.
• Storage: When not in use, store the motor in a dry, protected area. The folding handle allows for compact storage.

8. Troubleshooting

If you encounter issues with your trolling motor, refer to the following common problems and solutions:

• Motor Not Starting:
  • Check battery connections for tightness and corrosion.
  • Ensure batteries are fully charged.
  • Verify the kill switch is properly engaged.
• Reduced Power/Speed:
  • Check battery charge level using the power display.
  • Inspect propeller for obstructions (weeds, fishing line) or damage.
  • Ensure electrical connections are secure.
• Unusual Noise/Vibration:
  • Inspect propeller for damage or imbalance.
  • Check for loose components on the motor shaft or mount.
• Propeller Not Turning:
  • Check for obstructions around the propeller.
  • Verify the motor is receiving power.

If problems persist after attempting these solutions, contact customer support.

9. Warranty and Support

For warranty information, technical support, or replacement parts, please contact the seller or refer to the official Haswing website. Keep your purchase receipt as proof of purchase.