1. Introduction
Foreword
Thank you for purchasing our 5.5-inch high bright touch screen monitor. Please read this manual carefully before using the unit. Have a great experience!
Caution
- Please avoid heavy impact and dropping the product onto the ground.
- The screen is made of glass. Do not drop the screen towards the ground. Keep away from injury if the screen is broken.
- Keep the product away from heat sources and avoid prolonged exposure to the sun, as the LCD screen may be damaged.
- To avoid damaging the product, do not disassemble or repair the unit yourself without adjustable components.
- To better maintain the LCD screen and protect the cover, follow these guidelines:
- Refrain from using hard objects to hit the screen.
- Do not force to wipe the screen.
- Do not use chemical solutions to clean the screen.
- Do not spray any detergent on the screen.
- Do not write on the screen directly.
- Do not stick anything on the screen.
- Simply wipe with a clean soft cloth and ensure no water is on the screen.
2. Key Features
- 5.5-inch 1920x1080 full HD IPS screen.
- Touch screen and intuitive button operation for diverse needs.
- High Brightness 1600nits, visible in sunlight.
- Supports 3D LUT Log to REC.709 and user 3D LUT upload (up to 32).
- Sony F970 external install and power kit design for external equipment, simplifying photography setup.
- Includes Waveform, Vectorscope, RGB Histogram, Focus Assist, Monochrome, and other functions for accurate exposure and focus.
- Multiple power supply modes: DC IN 12V, Type-C 5V, and NP-F battery slot.
- Stereo Earphone output.
- DC 8.4V power out to power your DSLR camera or mirrorless camera.
3. Package Contents
The F5 PROX monitor package typically includes the following items:

Image: FEELWORLD F5 PROX Package Contents
- FEELWORLD F5 PROX Monitor
- Micro HDMI Cable
- Tilt Arm
- Type-C to USB Adapter
- Disassemble Wrench
- Sunshade
- User Manual
- Power Adapter
4. Product Overview
4.1 Front Panel Instruction
The front panel features the 5.5-inch display and an indicator light. After connecting power, the indicator light is red. Long pressing the EXIT/U button turns the monitor on, and the light turns yellow. Once a signal is connected, it turns green.
4.2 Rear Panel Instruction
The rear panel includes a Battery Lock, NP-F Battery Slot, and the F970 External Power Kit. A 1/4" screw hole is also present for mounting.

Image: Rear Panel Layout
4.3 Top Button Instruction
The top panel features several buttons for control and navigation:

Image: Top Panel Buttons
| Button | Function when OSD is not displayed | Function when OSD is displayed |
|---|---|---|
| F1 | Custom button F1 | / |
| F2 | Custom button F2 | / |
| F3 | Custom button F3 | / |
| TOUCH | Turn ON/OFF touch function | / |
| MENU | Display OSD Main menu | Return to previous OSD menu |
| V | Decrease volume or backlight | Select next menu item; Decrease or adjust value of selected parameter |
| ^ | Increase volume or backlight | Select previous menu item; Increase or adjust value of selected parameter |
| EXIT/U | Power On/Off button | Return/Exit Menu |
4.4 Bottom Port Instruction
The bottom of the monitor provides several ports:
- DC OUT 8.4V: DC power output interface (barrel connector, polarity: center positive) for powering your DSLR or mirrorless camera via a separately available DC coupler.
- 3.5mm Earphone Port: For stereo earphone output.
- DC IN 5V (Type-C): Type-C power input. Recommended for local power supply only, not for connecting other devices to provide loop-out power.
4.5 Left Port Instruction
The left side of the monitor features the HDMI input and output ports, along with a DC power input.
- HDMI IN: HDMI signal input, up to 4K@60Hz.
- HDMI OUT: HDMI signal output, up to 4K@60Hz.
- DC IN 12V: DC power input (5.5mm outer, 2.1mm inner), supports 7 ~ 24V wide voltage.
5. Power Supply Ways
The monitor offers multiple power options:
- NP-F Battery Plate: The rear cover is equipped with an F970 battery plate, compatible with Sony F970 series batteries (F970, F960, F950, F930, F770, F750, F730, F570, F550, F530). It is recommended to use standard original NP-F batteries. When using battery power, the DC OUT 8.4V interface and external install and power kit can power other devices. For powering other devices, a larger capacity battery is recommended for longer use.
- DC IN 12V: The left side has a DC 12V input power port (5.5mm outer, 2.1mm inner) supporting 7 ~ 24V. A DC power adapter needs to be purchased separately. When using an external adapter, it's recommended to use at least a 3A power adapter if powering other equipment.
- Type-C 5V: The bottom of the monitor has a Type-C 5V input power port. This port can be connected to a power bank for power supply (at least 5V/2A). It is not used for data transmission and is recommended for local power supply only.
Remark: Please remove the battery from the monitor if you don't use it for a long time.

Image: Multiple Power Supply Options
6. Sony F970 External Install and Power Kit
The F5 PROX features a Sony F970 external install and power kit on its back. This kit allows you to mount and power external equipment such as wireless transmitters, LED lights, or video converters using a Sony F970 battery.

Image: F970 External Kit with Wireless Transmitter

Image: F970 External Kit with LED Light
The kit has two cross grooves, allowing you to adjust the position of the external device by loosening 2 screws (up/down or left/right) or install the kit upside down. If the kit is not needed, it can be removed.
Note: Before disassembling the kit, ensure the monitor is turned off, and then remove the battery or power adapter.
6.1 Moving the Kit
- Loosen the 2 screws.
- Use both hands to move the kit up.
- Move the round holes to align with the corresponding 2 screws. (The kit can also be installed upside down.)

Image: Adjusting the F970 External Kit
6.2 Removing the Kit
- Gently lift the kit upwards and carefully disassemble the 2P power cord.
- Remove the 2 screws.
6.3 Reinstalling the Kit
First, screw the 2 screws back into the screw holes on the monitor's back. Install the 2P power cable into the cutout, align the kit's round hole with the screw, push the kit to the screw at the center of the cross, then tighten the screws.
7. Mounting Points
7.1 1/4"-20 Thread Points
The monitor features four 1/4"-20 thread points (top, bottom, right side, and back center) for easy connection to hot shoe mounts, tripods, or other fixed installations.

Image: Multiple Mounting Points
7.2 Tilt Arm Mounting
The monitor secures to your camera using the included Tilt Arm via a shoe mount or 1/4"-20 thread.

Image: Tilt Arm Mounting
- Allows the monitor to rotate 360 degrees for viewing convenience.
- Provides secure and lightweight mounting via shoe mount or 1/4"-20 thread.
- Includes its own shoe mount for accessories like a microphone, LED light, or wireless receiver.
- Two small dots on the tilt arm align with the monitor for stable installation, allowing rotation without loosening screws.
8. Sunshade Installation
The portable sunshade helps resist strong light during outdoor shooting. It is easy to install and portable.

Image: Monitor with Sunshade
To install the sunshade:
- First, lock the Sunshade Frame tightly with the monitor.
- Open the sunshade and match the sticker on the sunshade inside to the marked part of the sunshade frame.
- Smooth and press the 3 sides on the sunshade to complete the installation.
11. How to Load LUTs
The F5 PROX supports loading custom 3D LUTs to preview filming looks in the field. You can upload up to 32 custom LUTs.

Image: Loading Custom 3D LUTs
11.1 File Requirements
- LUT file format suffix must be
.cube. - Single file size not to exceed 7.9Mb.
- Supports LUT-3D-Size 16, 17, 32, 33, 64, 65.
Remark: LUT file names must be in English or Arabic numerals.
11.2 Steps for Loading
- Ensure your USB flash drive is inserted into a Type-C to USB adapter and connected to the monitor's Type-C interface.
- Enter the main menu, navigate to LUT > Lut Import, and click Confirm to load. The monitor will automatically detect the USB flash drive.
If a valid LUT file is found, the monitor will load the LUT files and display "[n] name" (where [n] is the quantity number). If loading is successful, the screen will show "complete[n]". The quantity of LUT files should be under 32.
11.3 How to Clear Imported LUTs
Insert an empty USB flash drive into the monitor. Enter the main menu, navigate to LUT > Lut Import, and click Confirm. The imported LUTs will be cleared.
12. Technical Parameters
| Parameter | Value |
|---|---|
| Panel Size | 5.5" touch screen |
| Resolution | 1920 × 1080 pixels |
| Dot Pitch | 0.069 (H) × 0.069 (V) mm |
| Aspect Ratio | 16:9 |
| Brightness | 1600cd/m² |
| Contrast | 1000:1 |
| Viewing Angle | 80°/80° (L/R) 80°/80° (U/D) |
| Backlight | LED |
| Adjustable Backlight | Yes |
| Input | HDMI 1.4/2.0 compatible (HDCP 1.4 supported) |
| Output | HDMI 1.4/2.0 compatible (HDCP 1.4 supported), 3.5mm stereo headphone jack |
| Power In | DC IN 12V, Barrel (5.5mm outer, 2.1mm inner); DC IN 5V (Type-C) (Note: Use 5V/2A or more than 2A Type-C power supply) |
| Power Out | DC OUT 8.4V, Barrel (5.5mm outer, 2.1mm inner) |
| HDMI Input/Output Support Format | 480i/576i/480p/576p; 720p (60/59.94/50/30/29.97/25/24/23.98); 1080i (60/59.94/50); 1080p (60/59.94/50/30/29.97/25/24/23.98); 3840×2160p (60/50/30/29.97/25/24/23.98); 4096×2160p (60/50/30/29.97/25/24/23.98) |
| Power Input Voltage | 7~24V |
| Power Consumption | ≤9W |
| Unit Size (mm) | 148L x 93H x 21.75D (mm) |
| Unit Weight | 245g (with F970 external install and power kit) |
| Mount Points | 1/4"-20 thread points |
| Working Temperature | -20°C ~ 50°C |
| Storage Temperature | -30°C ~ 60°C |
13. Troubleshooting
13.1 Only Black and White or Monochrome Picture
- Check saturation, brightness, and contrast adjustments in the menu.
- Check if "Check Field" is set to black, white, or monochrome image mode.
13.2 No Image After Power On
- Verify that the signal cable is connected correctly and in good condition.
- Ensure you are using the standard adapter to connect the monitor. If powered by battery, check that the battery is fully charged.
13.3 Earphone No Sound
Check if the Volume control is open. Press the volume button and try to increase the volume.
If you encounter other problems, please contact our technical support.
14. User Tips
- For optimal outdoor visibility, utilize the included sunshade, especially in direct sunlight, even with the high 1600nit brightness.
- When powering external devices via the F970 kit or DC OUT, consider using a higher capacity NP-F battery to extend overall run-time.
- Familiarize yourself with the custom shortcut buttons (F1-F3) to quickly access frequently used monitoring functions, enhancing workflow efficiency.
- Regularly check for firmware updates to ensure your monitor has the latest features and performance improvements.
15. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official FEELWORLD website or contact your authorized dealer. Product specifications are subject to change without prior notice as product features and performance are continuously improved.
A detailed user manual in PDF format is available for download from the manufacturer's website: FEELWORLD F5 PROX User Manual (PDF)
16. Product Video
Video: Overview of the FEELWORLD F5 PROX monitor's features and use cases.



