Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the Hikvision DS-KV8413-WME1 IP Video Intercom Door Station. This device is designed for villa door station applications, offering advanced access control and communication features.
Key Features
- Support Wifi for convenient setup without extensive wiring.
- Web configuration interface for easy management.
- Durable aluminum alloy construction with IP65 and IK08 protection ratings.
- Integrated 3-indicator status display.
- Internal Mifare card reader for secure access control.
- Supports 4-channel indoor station access control.
- Advanced noise suppression and echo cancellation for clear audio.
- 2MP HD camera with IR supplement for enhanced night vision.
- Standard Power over Ethernet (PoE) or 12 VDC power supply.
Setup
Package Contents
Before beginning installation, ensure all components are present:
- DS-KV8413-WME1 Door Station
- Mounting accessories
- Quick Start Guide (refer to for initial wiring diagrams)
- Mifare Key Fobs (quantity may vary)
Installation
- Mounting: The DS-KV8413-WME1 supports surface mounting. Choose a suitable outdoor location, ensuring it is within Wi-Fi range if wireless connectivity is desired, and protected from direct heavy impact.
- Wiring: Connect the device using either Power over Ethernet (PoE) for combined power and data, or a 12 VDC power supply and a separate Ethernet cable. Refer to the included Quick Start Guide for detailed wiring diagrams for network, lock control, and alarm inputs/outputs.
- Power On: Once wired, apply power to the device. The integrated indicators will show the device status.
Network Configuration
- Initial Access: Use a web browser to access the device's default IP address (refer to the Quick Start Guide for the default IP and login credentials).
- Network Settings: Configure network parameters, including IP address, subnet mask, gateway, and DNS.
- Wi-Fi Setup: If using Wi-Fi, navigate to the wireless settings in the web interface. Select your Wi-Fi network and enter the password.
- Indoor Station Pairing: Follow the instructions in the indoor station manual to pair it with the DS-KV8413-WME1 door station for full intercom functionality.
Operating Instructions
Doorbell Functionality
- Making a Call: Visitors press one of the four physical buttons on the door station to initiate a call to the corresponding indoor station.
- Receiving a Call: The indoor station will ring, and the user can answer to establish two-way audio and video communication.
Access Control
- Card Access: Present a registered Mifare card to the integrated card reader to unlock the connected door.
- Remote Unlock: Users can remotely unlock the door from the indoor station during an active call.
- Exit Button: Connect an external exit button to the door station for easy egress.
Video Intercom
- Live View: Access the live video feed from the 2MP HD camera via the indoor station or a compatible mobile application.
- Two-Way Audio: Engage in clear conversations thanks to noise suppression and echo cancellation technologies.
- Night Vision: The IR supplement ensures clear video even in low-light conditions.
Maintenance
Cleaning
- Regularly clean the camera lens and the front panel with a soft, damp cloth.
- Avoid using harsh chemicals or abrasive cleaners, as these can damage the surface or lens.
- Ensure the device is powered off before cleaning if possible, or exercise caution around electrical connections.
Firmware Updates
- Check the Hikvision official website periodically for firmware updates.
- Updating firmware can improve performance, add new features, and enhance security.
- Follow the instructions provided with the firmware update package carefully.
Environmental Considerations
The DS-KV8413-WME1 is rated IP65 for dust and water resistance and IK08 for vandal resistance, making it suitable for outdoor environments. However, extreme conditions can still affect its lifespan. Ensure proper drainage around the installation area and avoid direct, prolonged exposure to harsh weather if possible.
Troubleshooting
No Power/Device Not Starting
- Check power connections (PoE or 12 VDC). Ensure the power source is active and providing the correct voltage.
- Verify network cable integrity if using PoE.
No Network Connectivity
- Wired Connection: Check the Ethernet cable connection to the router/switch. Ensure the network port LED indicators are active.
- Wi-Fi Connection: Verify Wi-Fi settings in the web interface. Ensure the device is within range of the Wi-Fi access point and the password is correct.
- IP Address Conflict: Check for duplicate IP addresses on your network.
Poor Audio/Video Quality
- Audio: Ensure the microphone and speaker are not obstructed. Check for excessive background noise. The device features noise suppression and echo cancellation, but extreme conditions can still impact quality.
- Video: Clean the camera lens. Ensure adequate lighting; the IR supplement should assist in low light. Check network bandwidth for potential bottlenecks.
Card Reader Not Working
- Ensure the Mifare card is correctly registered in the system.
- Present the card firmly and correctly to the card reader area.
- Check for any physical obstructions or damage to the card reader.
Specifications
| Category | Parameter | Value |
|---|---|---|
| System Parameters | Operating System | Embedded Linux |
| ROM | 32 MB | |
| RAM | 256 MB | |
| CPU | Embedded MCU Processor | |
| Video Parameters | Lens | 1 |
| Main Stream Resolution | 1920 × 1080 | |
| Sub Stream Resolution | 640 × 480 | |
| FOV | Horizontal: 124°, Vertical: 75° | |
| Audio Parameters | WDR | Support |
| Supplement Light | IR supplement | |
| Video Compression | H.264 | |
| Audio Compression | G.711 U, G.711 A | |
| Audio Input | Built-in omnidirectional microphone | |
| Audio Output | Built-in loudspeaker (More than 80 dB within 30 cm) | |
| Audio Quality | Noise suppression and echo cancellation | |
| Capacity | User Capacity | 2000 |
| Card Capacity | 10000 | |
| Network Parameters | Communication Protocol | TCP/IP, RTSP |
| Wired Network | 10/100 Mbps self-adaptive Ethernet | |
| Wi-Fi Standard | Wi-Fi 802.11 b/g/n | |
| Wireless Frequency | Received Frequency | 2.4 to 2.4835GHz |
| Transmitted Frequency | 2.4 to 2.4835GHz | |
| Bandwidth | 20/40 MHz | |
| Frequency Power | 802.11b:15 dBm +/- 1.5 dBm, 802.11g:15 dBm +/- 1.5 dBm, 802.11n(ht20):14 dBm +/- 1.5 dBm, 802.11n(ht40):12 dBm +/- 1.5 dBm | |
| Authentication | Card Reading Frequency | 13.56 MHz |
| Device Interfaces | Alarm Input | 4 |
| Network Interface | 1 | |
| TAMPER | 1 | |
| Exit Button | 2 Max. | |
| RS-485 | 1 | |
| TF Card | 1 (reserved) | |
| Lock Control | 2 | |
| Door Contact Input | 2 | |
| Power Interface | 1 | |
| General | Buttons | 4 |
| Installation | Surface mounting | |
| Indicator | 3 | |
| Weight | 380 g | |
| Protective Level | IP65, IK08 | |
| Working Temperature | -40°C to 53°C (-40°F to 127.4°F) | |
| Working Humidity | 10% to 95% | |
| Dimensions | 174 mm × 91 mm × 29 mm | |
| Application Environment | Outdoor | |
| Power Consumption | < 10 W |
User Tips
- Weather Protection: While the DS-KV8413-WME1 has IP65 weather resistance, consider installing it under a small overhang or in a location with some protection from direct, heavy rain or snow to prolong its lifespan and maintain optimal performance.
- Wi-Fi Signal Strength: For reliable wireless operation, ensure the door station is installed within a strong Wi-Fi signal area. Use a Wi-Fi analyzer tool during installation to check signal strength.
- Card Management: Regularly review and update your Mifare access card list through the web interface to ensure only authorized individuals have access.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official Hikvision website or contact your authorized Hikvision dealer. Keep your purchase receipt and product serial number handy when contacting support.