1. Introduction and Product Overview
The GAIA Diluent NP003 is a high-quality permanent solvent and thinner designed for use with model tools and oily paints, specifically Gaia Color and Gaianotes lacquer-based paints. This product is formulated to provide excellent thinning capabilities for both brush and airbrush applications, and also serves as an effective cleaning agent for your tools.
This manual provides essential information on the safe handling, proper usage, and storage of the GAIA Diluent NP003 to ensure optimal results and user safety.

2. Safety Information
WARNING: This product is a strong solvent and is flammable. Read all safety instructions carefully before use.
- No Open Flames: Keep away from heat, sparks, open flames, and hot surfaces. No smoking.
- Ventilation: Use only in a well-ventilated area. Ensure adequate air circulation to prevent vapor accumulation.
- Keep Out of Reach of Children: Store this product securely where children cannot access it.
- Avoid Ingestion and Inhalation: Do not swallow. Avoid breathing vapors. Use a respirator if ventilation is insufficient.
- Eye Contact: If product gets into eyes, immediately flush with plenty of water for several minutes. Seek medical attention promptly.
- Skin Contact: If product comes into contact with skin, wash thoroughly with soap and water.
- Personal Protective Equipment (PPE): Always wear appropriate chemical-resistant gloves and eye protection (safety goggles) when handling this product.
- Intended Use: Do not use this product for any purpose other than its intended use as a paint diluent and tool cleaner.

3. Product Components
The GAIA Diluent NP003 product consists of a single bottle containing the permanent solvent. The specific volume for this model is 250ml.
- GAIA Diluent NP003s (250ml): 1 bottle of solvent.
4. Setup and Preparation
Before using the GAIA Diluent NP003, ensure your workspace is properly prepared:
- Ventilation: Work in a well-ventilated area, preferably outdoors or in a room with an exhaust fan.
- Personal Protection: Don safety goggles and chemical-resistant gloves.
- Surface Protection: Cover your work surface with newspaper or a protective mat to prevent spills from damaging the area.
- Tools and Materials: Have your model paints, mixing cups, stirring sticks, and application tools (brushes, airbrush) ready.
- Waste Container: Prepare a designated container for solvent waste and cleaning rags.
5. Operating Instructions
The GAIA Diluent NP003 is primarily used for thinning lacquer-based paints and cleaning tools.
5.1. Paint Dilution
This diluent is suitable for Gaia Color and Gaianotes lacquer-based paints. The ideal mixing ratio can vary depending on the paint's consistency, desired finish, and application method (brush or airbrush).
- For Brush Painting: Start with a paint-to-diluent ratio of approximately 2:1 to 3:1 (paint:diluent). Add the diluent gradually while stirring until the paint reaches a smooth, workable consistency.
- For Airbrush Painting: A thinner consistency is usually required. Start with a paint-to-diluent ratio of 1:1 to 1:2 (paint:diluent). Test the consistency on a scrap piece before applying to your model. The paint should flow smoothly through the airbrush without clogging or sputtering.
Always mix in small batches and test the consistency before full application.
5.2. Tool Cleaning
The NP003 diluent is also effective for cleaning brushes, airbrushes, and other tools used with lacquer-based paints.
- Brushes: Dip the brush into a small amount of diluent and gently swirl to dissolve paint residue. Wipe the brush on a paper towel and repeat until clean. Finish by washing with soap and water.
- Airbrushes: After painting, empty any remaining paint from the airbrush cup. Pour a small amount of diluent into the cup and spray it through the airbrush until clear. Disassemble and clean individual parts as needed, using diluent and cotton swabs or specialized brushes.
6. Maintenance and Storage
Proper maintenance and storage are crucial for the longevity of the product and your safety.
- After Use: Ensure the bottle cap is tightly sealed immediately after each use to prevent evaporation and maintain product integrity.
- Storage Conditions: Store the diluent in a cool, dark, and well-ventilated place. Keep it away from direct sunlight, heat sources, and any potential ignition sources.
- Container Integrity: Do not transfer the diluent to unlabeled containers. Keep it in its original packaging.
- Disposal: Dispose of used diluent and paint-soaked rags according to local environmental regulations. Do not pour down drains.
7. Troubleshooting
Here are some common issues and their solutions when using paint diluents:
- Paint too thick after mixing: Add a small amount more diluent, stir thoroughly, and re-test.
- Paint too thin/runs: This indicates too much diluent. Add more paint to the mixture to thicken it, or start with a fresh batch using less diluent.
- Poor paint adhesion: Ensure the surface of your model is clean, dry, and properly primed before painting. The diluent ratio should not be excessively high.
- Airbrush clogging: The paint mixture might be too thick, or the airbrush needs thorough cleaning. Ensure proper dilution and clean your airbrush regularly.
8. Specifications
| Attribute | Detail |
|---|---|
| Item Type | GAIA Diluent Model T |
| Brand Name | Erilles |
| Model | NP003s |
| Origin | Japan (Jp) |
| Volume | 250ml |
| Approx. Package Weight | 0.4 kg |
| Approx. Package Dimensions | 20cm x 18cm x 10cm |
9. User Tips
- For best results, always use the diluent with compatible lacquer-based paints.
- When airbrushing, experiment with different dilution ratios to find the perfect flow for your specific airbrush and paint. A good starting point is often a 1:1 ratio.
- Clean your airbrush immediately after use to prevent paint from drying inside and causing clogs.
- Store the diluent in a cool, dark place to maintain its effectiveness over time.
10. Warranty and Support
For any product-related inquiries, technical assistance, or concerns, please contact the seller or manufacturer directly. Keep your purchase records for reference.