Introduction
The QINLIFE Y80-2X is a high-performance Bluetooth headset designed for motorcycle helmets, offering seamless communication, entertainment, and navigation features. It boasts Bluetooth 5.0 connectivity, CVC DSP dual intelligent noise reduction, IP67 waterproofing, and a long-lasting 1000mAh battery for extended use. This manual provides detailed instructions for the proper installation, operation, and maintenance of your Y80-2X headset.

Package Contents
Before proceeding with installation, please verify that all items listed below are included in your package:

- Y80-2X Intercom Host (1 or 2 units depending on package)
- Base (1 or 2 units)
- Integrated Full/Half Helmet Microphone (1 or 2 units)
- Type-C Charging Cable (1 or 2 units)
- User Manual (1 unit)
- Velcro Installation Package (1 unit)
Setup and Installation
The Y80-2X headset is designed for easy installation and compatibility with various helmet types.
1. Helmet Compatibility
- The soft microphone set is suitable for full-face helmets and rally helmets.
- The hard microphone set is suitable for half-face helmets, open-face helmets, and retro helmets.

2. Mounting the Headset
The headset features a split installation design for convenience and secure attachment.
- Attach the clip-on base to the side of your helmet. Ensure it is securely fastened.
- Use the provided Velcro pads to position the speakers inside the helmet, aligning them with your ears for optimal sound.
- Attach the microphone to a suitable position inside the helmet, ensuring it is close to your mouth for clear voice pickup.
- Slide the Y80-2X intercom host onto the mounted base until it clicks into place.

Operating Instructions
Familiarize yourself with the controls and functions of your Y80-2X headset for an optimal experience.

1. Power On/Off and Pairing
- Power On/Off: Use the designated button (labeled "Turn on/off play" in the diagram) to power the device on or off.
- Bluetooth Pairing: When powered on for the first time or after a reset, the headset will enter pairing mode. Search for "QINLIFE Y80" on your mobile device's Bluetooth settings and connect.
2. Intercom Function
The Y80-2X supports intercom communication between two riders and is compatible with other brands of Bluetooth headsets/walkie-talkies.
- Initiating Intercom: Press the "Intercom key" to establish a connection with another paired Y80-2X headset or compatible device.
- Intercom Range: The maximum talking distance is up to 1000 meters, with stable performance typically between 300 to 500 meters in outdoor environments.


3. Phone Calls
- Automatic Answering: Incoming calls are answered automatically after a voice announcement of the telephone number, eliminating the need for manual operation.
- Ending Calls: Use the designated button (labeled "hang up" in the diagram) to end a call.

4. Music Playback and Navigation
- Play/Pause: Use the designated button (labeled "play/Pause" in the diagram) to control music playback.
- Volume Adjustment: Touch the volume buttons to adjust the audio level. "Short Press the last song and Long Press the volume down" and "Short press down and long press volume up" indicate specific controls.
- Track Control: Short press the appropriate buttons for previous/next track.
- Smart Connection: The headset can connect to two mobile phones simultaneously, allowing you to switch between music, navigation, and calls with one button. The high-fidelity HIFI pronunciation unit ensures excellent sound quality.


5. Voice Assistant
Activate your mobile phone's AI voice assistant for hands-free control.
- Activation: Short press the "Voice assistant" button to wake up the voice assistant (e.g., Siri, Google Assistant).
- Commands: Use voice commands for tasks like playing music, navigating, or making calls.

Maintenance and Care
Proper maintenance ensures the longevity and optimal performance of your Y80-2X headset.
1. Waterproofing
The headset features an IP67 waterproof rating, making it highly resistant to dust and rain. It is designed to withstand splashes and brief immersion but is not suitable for prolonged submersion.
- Wipe the unit with a dry or slightly damp cloth to clean.
- Avoid using harsh chemicals or abrasive cleaners.
- Ensure the Type-C charging port cover is securely closed when not charging to maintain water resistance.

2. Battery Charging
The Y80-2X is equipped with a built-in 1000mAh polymer lithium battery, featuring a Qualcomm Bluetooth chip for lower power consumption and longer endurance.
- Charging: Connect the headset to a 5V/1A power source using the provided Type-C charging cable.
- Charging Time: A full charge typically takes approximately 2.5 hours.
- Battery Life: Enjoy up to 30 hours of call time and about 25 hours of music playback (at maximum volume). The standby time is approximately 18 months, with an overall endurance of up to 32 hours.


Troubleshooting
If you encounter issues with your Y80-2X headset, refer to the following common problems and solutions:
- No Power: Ensure the battery is charged. Connect to a power source and check the charging indicator.
- Cannot Pair: Make sure the headset is in pairing mode. Turn off and on your phone's Bluetooth, then try searching again. Ensure no other devices are actively connected to the headset.
- Poor Audio Quality/Noise:
- Check speaker and microphone placement inside the helmet.
- The headset features CVC DSP dual intelligent noise reduction. Ensure the microphone is not obstructed.
- Move closer to the intercom partner if experiencing range issues.
- Intercom Not Connecting: Ensure both headsets are within range and in intercom pairing mode. Verify compatibility if connecting to a non-Y80-2X device.
- Buttons Unresponsive: Ensure the headset is not wet or excessively dirty. Try restarting the device.

Specifications
| Feature | Detail |
|---|---|
| Model Name | Y80-2X |
| Item Type | Helmet Headset |
| Bluetooth Version | 5.0 |
| Max Number Of Talkers | 2 People |
| Maximum Intercom Distance | 1000m (effective outdoor range 300-500m) |
| Special Features | Noise Reduction (CVC DSP), Waterproof, Intercom |
| Applicable Helmet Type | Universal, Open face, Flip Up Helmet, Full Face, MOTOCROSS, Half Helmet, MODULAR |
| Power Supply Mode | Built-in Battery |
| Battery Capacity | 3.7V 1000mAh Polymer Lithium |
| Connection Mode | Wire, Bluetooth |
| Item Weight | 48g (Bare machine: 60g/2.12oz) |
| Dimensions (L*W*H) | 85*35*51mm / 3.35*1.38*2 inches |
| External Testing Certification | CE |
| Waterproof Rating | IP67 (also IPX6) |
| Working Speed | Up to 100KM/H |
| Working Voltage | 3.7V |
| Charging Interface | Type-C |
| Ambient Light | Support on and off |
| Charging Time | ≤2.5 hours |
| Call Time | 30 hours |
| Standby Time | About 18 months |
| Playing Time (Music) | About 25 hours (at maximum volume) |
| SNR | 78dB |
| Frequency Response | 100Hz~18KHz |
| Bluetooth Identification Name | QINLIFE Y80 |
User Tips
- Voice Assistant: Utilize the one-click voice assistant feature for hands-free control of your phone's functions, enhancing safety while riding.
- Helmet Fit: Ensure your helmet and the headset components (speakers, microphone) are properly fitted for optimal sound clarity and microphone performance, especially for noise reduction.
- Battery Management: For long rides, fully charge your headset before departure. The 1000mAh battery provides substantial endurance.
- Intercom Range: While the maximum range is 1000m, practical outdoor range is typically 300-500m. Keep this in mind for group rides.
- Physical Buttons: The physical button design is intended for ease of use with gloves. Familiarize yourself with the button layout before riding.
- Dual Device Connectivity: Take advantage of the smart connection feature to pair with two devices simultaneously, allowing seamless switching between navigation, music, and calls.
Warranty and Support
For any product-related inquiries, technical support, or warranty claims, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific contact information and warranty terms.