AUTOPMALL TK913 Mini GPS Tracker

Contents

TKSTAR TK913 Mini GPS Tracker User Manual

Model: TK913 Mini GPS Tracker | Brand: AUTOPMALL

1. Overview

The TKSTAR TK913 Mini GPS Tracker is a versatile and waterproof device designed for real-time tracking of vehicles and assets. It operates on existing 2G GSM/GPRS networks and GPS satellites, offering remote monitoring via SMS, mobile app, and web platform. Key features include GPS and LBS dual positioning for accurate location, a powerful built-in magnet for easy installation, and a long-lasting 1500mAh Li-ion battery providing up to 25 days of standby time. The device supports various alarms such as overspeed, shock/vibration, low battery, and geo-fence, ensuring comprehensive monitoring. It also includes a remote voice monitor function and stores GPS data in its internal memory if network signal is lost.

TKSTAR TK913 Mini GPS Tracker
Figure 1: TKSTAR TK913 Mini GPS Tracker device.
TK913 Features: Realtime Tracking, Powerful Magnet, Waterproof IP65, Voice Monitor
Figure 2: Key features of the TK913 tracker including real-time tracking, powerful magnet, IP65 waterproof rating, and voice monitor.

2. Setup

2.1 Package Contents

Before you begin, ensure all items are present in the package:

  • 1 x TK913 Main Unit
  • 1 x USB Charging Cable
  • 1 x User Manual (this document)
  • 1 x Original Box

Note: SIM Card and SD Card are NOT included and must be purchased separately.

Package contents of TK913 GPS tracker
Figure 3: Contents of the TK913 package.

2.2 SIM Card Installation

The TK913 tracker requires a Nano SIM card to function. Ensure the SIM card supports 2G GSM network, can make calls, send messages, and has GPRS network capabilities. The SIM card must have sufficient balance and the call ID display function enabled with call transfer turned off.

  1. Open the rubber cover on the device.
  2. Insert the Nano SIM card into the SIM card slot with the chip facing down.
  3. Ensure the SIM card is correctly inserted. Only GSM SIM cards work with this model.
TK913 device with SIM card slot, USB port, and indicator light labeled
Figure 4: Device ports and SIM card slot. Note the indicator light, SIM card slot, and USB port.
Diagram showing Normal SIM, Micro SIM, and Nano SIM card types
Figure 5: Illustration of different SIM card sizes. Use a Nano SIM card for this device.

2.3 Turning On the Device

After inserting the SIM card:

  • The indicator light will turn on when the SIM card is inserted.
  • The device will acquire a GPS location when a GPS signal is available, and an LBS location if no GPS signal is present.
  • The device automatically turns off when the SIM card is removed.

2.4 Admin Number Setting

To ensure all SMS operations are controlled by a specific number, set an admin number. After setting, only this number can send commands to the device.

Command: admin123456 [your mobile phone number]

(Replace [your mobile phone number] with your actual phone number, not the tracker's SIM card number.)

Reply: admin ok

To cancel the admin number:

Command: noadmin123456

Reply: noadmin ok

2.5 GPRS Activation and APN Setting

For online tracking via app or web platform, GPRS must be activated and the Access Point Name (APN) configured. Each SIM card carrier has its own APN settings. You can find this information online or by inserting the SIM card into a mobile phone.

Step 1: Activate GPRS

Command: gprs123456

Reply: gprs ok

Step 2: Set APN

Command: apn123456 [APN content]

Reply: apn ok

If your APN requires a username and password:

Command (Username): apnuser123456 [APN username]

Reply: apnuser ok

Command (Password): apnpasswd123456 [APN password]

Reply: apnpasswd ok

(Note: There is a small blank space after 123456 in each command.)

2.6 Tracking Platform Setup

The TK913 offers a lifetime free tracking software accessible via web server and mobile application.

  • Web Server: Access the platform at www.mytkstar.net. Log in using the IMEI/ID number found on the back cover of the device and the default password 123456.
  • Mobile App: Search for "TKSTAR GPS" in the Apple App Store (iOS) or Google Play Store (Android), or scan the QR code provided in the manual. Select "Log in by IMEI/ID" and use the same credentials as the web server.
Screenshot of TKSTAR GPS mobile app and web interface
Figure 6: TKSTAR GPS mobile application and web server interface for tracking.

3. Operating Instructions

3.1 SMS Tracking

You can track the device by calling its SIM card number or sending an SMS command.

  • Call Tracking: Call the SIM card phone number in the tracker. You will receive a Google Maps link of the device's position.
  • SMS Command: Send G123456# to the SIM card phone number in the tracker. You will receive a Google Maps link.

The SMS reply will include latitude, longitude, speed, time, battery percentage, device ID, and a Google Maps link. The device supports GPS and LBS tracking. GPS accuracy is 5-10 meters, while LBS accuracy is 100-1000 meters.

Realtime tracking on Google Maps via mobile, tablet, and computer
Figure 7: Real-time tracking interface on various devices.
Multiple positioning ways: LBS and GPS location accuracy
Figure 8: Comparison of LBS and GPS location accuracy.

3.2 Alarm Settings

The tracker supports various alarms that send notifications to the admin number.

  • Overspeed Alarm:

    Setting Command: speed123456 [speed value] (e.g., speed123456 070 for 70km/h)

    Reply: speed ok

    If the unit exceeds the set speed, it will send "speed alarm!" to the admin number every 5 minutes.

    Canceling Command: nospeed123456

    Reply: nospeed ok

  • Shake/Vibration Alarm:

    Ensure the tracker is stationary for 5 minutes for this function to activate.

    Setting Command: shock123456

    Reply: shock ok

    The tracker will send "sensor alarm!" to the admin number when it detects a shock.

    Canceling Command: noshock123456

    Reply: noshock ok

  • Movement Alarm:

    When the unit is immobile for 10 minutes, you can set a movement alarm.

    Setting Command: move+password

    If the device moves 500m, it will send "Move Alarm+Latitude and longitude" to the authorized number.

  • Low Battery Alarm: The device automatically sends an alarm when the battery level drops below 30%.
Multiple alarms: Movement, Low Battery, Overspeed, Vibrate
Figure 9: Visual representation of various alarm types.

3.3 Device Working Modes (Sleep Modes)

Smart sleep modes help conserve battery life.

  • Sleep by Time Mode:

    Setting Command: sleep123456 time

    Reply: sleep time ok

    In this mode, the tracker works for 5 minutes after being woken up, then returns to sleep. GPS shuts off, and GSM operates in low consumption. SMS commands or calls can wake up the tracker.

  • Sleep by Shock Sensor Mode (Factory Default):

    Setting Command: sleep123456 shock

    Reply: sleep shock ok

    If no shock is detected for 5 minutes, the tracker enters "sleep by shock" mode. GPS shuts off, and GSM operates in low consumption. Vibration, SMS, or calls can wake up the tracker.

Comparison of Sleep Modes vs. No Sleep Modes for battery saving
Figure 10: Illustration of battery saving through sleep modes.

3.4 Remote Voice Monitor

You can remotely monitor the audio around the device.

  1. Send Monitor+Password to the device (e.g., monitor123456 if default password is used). The device will enter monitor mode.
  2. Call the SIM number in the device. It will automatically answer, allowing you to listen to the surrounding environment.
Voice monitor feature of TK913 GPS tracker
Figure 11: Remote voice monitoring capability.

3.5 Geo-fence

Set up a virtual safety zone. If the tracker enters or exits this area, it will send an alarm.

This feature is typically configured via the web platform or mobile app.

Geo-fence feature showing a virtual safety zone on a map
Figure 12: Geo-fence setup for defining safe zones.

3.6 History Route Playback

The app and web server can record and store tracking data for up to 6 months, allowing you to review the device's historical routes at any time.

History route playback on a map interface
Figure 13: History route playback feature on the tracking platform.

3.7 Time Setting

To set the local time zone (factory setting is GMT 0):

Command: timezone123456 [local time zone] (e.g., timezone123456 +1)

Reply: time ok

3.8 Reset Hardware

To reset the device hardware:

Command: begin123456

Reply: begin ok

4. Maintenance

4.1 Battery Information

The device is equipped with a built-in 3.7V 1500mAh rechargeable Li-ion battery, offering a standby time of up to 25 days. Charging input is DC 5V-1.0A. The battery level is indicated in tracking messages and alarms are sent when it drops below 30%.

Outstanding features including big backup battery and IP65 waterproof
Figure 14: Features highlighting the large backup battery and IP65 waterproof rating.

4.2 Waterproof Rating

The TK913 has an IP65 waterproof rating, meaning it can resist splashes of water. It is not designed to be submerged in water.

4.3 General Care

  • GPS tracking works best outdoors.
  • Do not disassemble the device without authorization.
  • Ensure the SIM card is correctly inserted and functional.

5. Troubleshooting (FAQ)

ProblemSolution
Fail to turn onCheck if the battery is charged.
No GSM signal
  • Check if the SIM card is installed correctly.
  • Check if the SIM card is a GSM network card.
  • Ensure the PIN code is not turned on.
  • Ensure no calls are diverted.
No GPS signalA more open view of the sky is recommended to ensure the device can receive the GPS signal normally.
No reply to SMS commandCheck if the password is wrong or the command format is incorrect.
No reply to calling & No alarm messageEnsure an authorized/admin phone number is correctly set up.
Platform position differs from actual position
  • If there is no uploading position time or GPS signal, call the device phone number. If the reply is like "Pic 2" (LBS tracking), it means no GPS signal. The position shown is the last GPS location.
  • If the reply is like "Pic 1" (GPS tracking), it means the device has not yet reached the uploading time.

6. Specifications

FeatureSpecification
Dimensions (L x W x H)55 x 36 x 21mm (1.8'' x 1.18'' x 0.69'')
Weight58g
NetworkGSM/GPRS (2G) or 4G (depending on model)
Band (2G)GSM 850/900/1800/1900Mhz
GPS Sensitivity-159dBm
GPS Accuracy5m
Charging InputDC 5V-1.0A
BatteryBuilt-in 3.7V 1500mAh rechargeable Li-ion Battery
Standby TimeUp to 25 days
Time to First Fix (Cold Status)45s
Time to First Fix (Warm Status)35s
Time to First Fix (Hot Status)1s
Storage Temperature-40°C to +85°C
Operation Temperature-20°C to +55°C
Humidity5%-95% non-condensing
Waterproof RatingIP65
GPS Geographic LocationEurope (Note: Device works worldwide, but this might refer to a default map region or specific SKU variant)
Special FeaturesInternet Connected
CertificationCE, RoHS
Table of 2G TK913 Product Parameters
Figure 15: Detailed product parameters for the 2G TK913 model.
Worldwide compatibility map with note about 2G network closures
Figure 16: Worldwide compatibility information, including a note on countries that have closed 2G networks.

7. Warranty and Support

The TKSTAR TK913 Mini GPS Tracker comes with a one-year warranty. For detailed warranty terms, service, and additional support, please refer to the official user manual PDF or contact the seller.

A comprehensive user manual in PDF format is available for download: View User Manual (PDF).

8. User Tips

  • Network Compatibility: Before purchasing, verify if your region still supports 2G GSM networks. Some countries (e.g., Australia, Japan, China Taiwan, South Korea, Singapore, Canada, New Zealand) have closed their 2G networks. If you are in such a region, consider ordering a 4G version of the GPS tracker if available.
  • Multi-Device Tracking: The tracking platform and app support managing multiple devices simultaneously. If you purchase more than one tracker, you can typically view all of them from a single admin account.
  • Battery Life: The stated standby time is up to 25 days. Actual battery life can vary based on usage frequency, signal strength, and chosen sleep modes. Utilizing the "Sleep by time" or "Sleep by shock sensor" modes can significantly extend battery duration.
  • Outdoor Use: For optimal GPS accuracy, ensure the device has a clear view of the sky. LBS tracking is available indoors or in areas with poor GPS signal but offers lower accuracy.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.