Interest Maker 18650 Type-C LCD Display Battery Capacity Tester

Contents

18650 Lithium Battery Capacity Tester Module User Manual

Model: 18650 Type-C LCD Display Battery Capacity Tester

1. Introduction

This manual provides detailed instructions for the safe and effective use of your 18650 Lithium Battery Capacity Tester Module. This device is designed for measuring the internal resistance and capacity of 18650 lithium batteries, supporting both charging and discharging functions with a maximum of 9 cycles in automatic mode.

Important Safety Note: During charging and discharging, some components may generate local high temperatures (60-80°C). Ensure the operating environment is open and uncovered. It is highly recommended to use a fan for heat dissipation. The 18650 battery holder is designed for flat-head batteries to ensure a firm connection.

Video: Product overview and basic operation demonstration.

2. Specifications

  • Model Number: 18650 Type-C LCD Display Battery Capacity Tester
  • Type: Household Battery Tester
  • DIY Supplies: Electrical
  • Brand Name: Interest Maker
  • Origin: Mainland China
  • Certification: CE
  • Battery Included: No
  • High-concerned chemical: None
  • Working Power Supply: DC5V external power supply or 18650 battery (both required)
  • Applicable Batteries: Suitable for batteries meeting stop discharge voltage of 2.5~3.5V and charging at 4.2V
  • Power Supply Interface: Type-C interface (self-contained power supply line, C-port mobile phone line)
  • System Language: Chinese, English
  • Test Quantity: 1-way charging and discharging measurement (right battery only)
  • Internal Resistance Measurement: Supported, using DC two-wire method.
  • Charging Function: Supported, 1-way program control (max 1A), 1-way hardware control (max 0.5A).
  • Discharge Function: Supported, 1 channel (max 1A discharge), stops automatically when conditions met.
  • Automatic Charging and Discharging: Supported, battery fully charged at end of auto mode (stop voltage ≥ 2.8V).
  • Cyclic Charging and Discharging: Supported, adjustable for 1-9 cycles.
  • Status Prompt: Supported
  • Stop Discharge Voltage: 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V, 3.5V (11 gears adjustable)
  • Discharge Current: Two resistance circuits, max 1A, non-adjustable, independent modification not supported.
  • Charging Voltage: Controlled by dedicated battery charging chip, max 0.5A/1A, full charge 4.2V.
  • Power Off Saving: Saves set parameters, not measurement data.
  • Product Weight: 80g (net weight), 120g (including packaging)
  • Product Size: 110 × 88 × 30mm
  • Package Size: 153 × 100 × 42mm (corrugated paper box)

3. Product Components and Interface

Labeled diagram of the 18650 Lithium Battery Capacity Tester Module components

Diagram: Labeled components of the battery tester.

  1. Working battery compartment (hardware control supports up to 0.5A charging, without metering charging capacity)
  2. 1.77 inch display screen
  3. Charging indicator light for working battery compartment (on during charging, off when fully charged)
  4. Type-C 5V power supply interface
  5. "ON/OFF/Menu" button
  6. "Adjust" button
  7. Start/Stop button
  8. Test ② Type-C external discharge interface
  9. Test ① Charging and discharging 18650 battery compartment (software controls up to about 1A charging and discharging)
  10. 10W 8 Ω J discharge cement resistance

Note: Test ② (8) and Test ① (9) cannot be tested simultaneously.

Front view of the 18650 Lithium Battery Capacity Tester Module

Image: Front view of the tester, showing battery compartments and display.

Close-up of the battery compartment showing positive and negative terminals

Image: Close-up of a battery compartment, highlighting the positive and negative terminals.

Side view of the tester with approximate dimensions (110mm x 88mm x 30mm)

Image: Side view of the tester with approximate dimensions.

Back view of the tester showing the circuit board and QR code

Image: Back view of the tester.

4. Setup

4.1. Powering On/Off

  • Power On: The device powers on automatically when connected to a DC5V external power supply via the Type-C interface or when an 18650 battery is inserted into the working battery compartment (left side). If the device is off but power is connected, click the "ON/OFF/Menu" button to power on.
  • Power Off: Press and hold the "ON/OFF/Menu" key to shut down the machine when it is turned on.
Instructions for powering the device on and off

Image: Visual guide for ON/OFF operations.

4.2. Language Switching

The system supports both Chinese and English languages.

  1. Ensure the device is shut down.
  2. Press and hold the "Adjust" key to start the machine. Release the key after the screen lights up.
  3. Wait 10 seconds after starting the machine for it to shut down automatically.
  4. Reboot the device to complete the language switch.
Instructions for switching the display language between Chinese and English

Image: Visual guide for language switching.

5. Operating Instructions

5.1. Interface Display

The 1.77-inch display screen shows various parameters during operation:

Detailed explanation of the display interface elements

Image: Display interface with numbered labels.

  • ① Real-time voltage
  • ② Real-time current
  • ③ Real-time power
  • ④ Cumulative capacity (mAh)
  • ⑤ Accumulated energy (mWh)
  • ⑥ Cumulative run time (hhh:mm:ss)
  • ⑦ Internal resistance of battery (mR)
  • ⑧-1: Working mode menu
  • ⑧-2: Stop voltage menu
  • ⑧-3: Cycle times menu
  • ⑨ Status indication (e.g., STA:STOP, STA:CHG, STA:DSG, STA:END)

5.2. Measuring Internal Resistance

The product uses a DC 2-wire method for internal resistance testing. For highest accuracy, test fully charged batteries. Results are for reference and comparison within the same batch of batteries. For professional-grade accuracy, a 4-wire AC method instrument is recommended.

Test Method:

After installing the battery, wait a few seconds for the data to stabilize. The battery voltage and internal resistance parameters will then be displayed. Data loading may have a slight delay during battery insertion/removal.

Image showing the display during internal resistance measurement

Image: Display showing internal resistance measurement.

Display showing infinite resistance when no battery is installed

Image: Display when no battery is installed (infinite resistance).

Display showing 88 mOhm internal resistance with a battery installed

Image: Display showing internal resistance with a battery installed.

Internal Resistance Accuracy Reference:

Table comparing internal resistance measurements of this product versus other brands

Table: Comparison of internal resistance measurements.

5.3. Setting Parameters

  1. Navigate Menu: Click the "ON/OFF/Menu" button to cycle through menu options.
  2. Select Mode: When the "MODE" option is highlighted, click the "Adjust" button to switch between modes (AUTO, CHG, DSG).
  3. Image showing how to adjust the mode setting

    Image: Adjusting the operating mode.

  4. Set Stop Discharge Voltage: When "STOP" is highlighted, click "Adjust" to change the stop discharge voltage (range 2.5V~3.5V, 11 adjustable gears). This setting is not applicable in "CHG-charging mode".
  5. Image showing how to set the stop discharge voltage

    Image: Setting the stop discharge voltage.

  6. Set Loop Times: When "LOOP" is highlighted, click "Adjust" to set the number of cycles (1-9). This is only valid in "AUTO" mode and invalid in "CHG" and "DSG" modes.
  7. Image showing how to set the loop times for cyclic testing

    Image: Setting the number of test loops.

5.4. Starting/Stopping a Program

Click the "Start/Stop" button to initiate or halt the selected program.

Image showing the Start/Stop button

Image: Location of the Start/Stop button.

Upon completion, the program will display "STA:END".

Display showing 'STA:END' indicating program completion

Image: Program completion status.

5.5. Charging Batteries

Warning: Charging generates heat. Ensure adequate heat dissipation.

5.5.1. Right Test ① Battery Charging (Program Controlled)

  1. Connect a DC5V external power supply to the Type-C interface.
  2. Set the mode to "CHG" using the "ON/OFF/Menu" and "Adjust" buttons.
  3. Display showing 'MODE:CHG' for charging mode

    Image: Setting the mode to CHG.

  4. Insert the 18650 battery into the right battery compartment (Test ①).
  5. Click "Start/Stop" to begin charging. The display will show "STA:CHG". Only time is recorded during charging; capacity and energy are not measured.
  6. Display showing charging status and parameters

    Image: Charging in progress.

  7. The program stops automatically when charging is complete, displaying "STA:END".

5.5.2. Left Working Battery Compartment Charging (Hardware Controlled)

Connect a DC5V external power supply. The left battery compartment (Power supply battery) charges automatically via hardware control, with a maximum current of approximately 0.5A. The red indicator light will be on during charging and turn off when fully charged.

Close-up of the left battery compartment with charging indicator

Image: Left battery compartment and charging indicator.

5.6. Measuring Battery Capacity (Discharge)

Warning: Discharging generates significant heat from the cement resistance. Do not touch it and ensure enhanced heat dissipation.

Battery capacity can only be measured after a full discharge cycle.

  1. Ensure the working battery (left compartment) is fully charged. An external 5V power supply is not strictly required for discharge mode if the working battery is charged. If keys become unresponsive without external power, replace the working battery.
  2. Image showing the Type-C power input and battery polarity

    Image: Type-C power input and battery polarity.

  3. Set the mode to "DSG" using the "ON/OFF/Menu" and "Adjust" buttons.
  4. Display showing 'MODE:DSG' for discharge mode

    Image: Setting the mode to DSG.

  5. Set the desired stop discharge voltage (e.g., 3.0V).
  6. Display showing 'STOP:3.0V' for stop discharge voltage setting

    Image: Setting the stop discharge voltage.

  7. Insert the 18650 battery into the right battery compartment (Test ①).
  8. Click "Start/Stop" to begin discharging. The display will show "STA:DSG". Time, capacity, and energy are recorded.
  9. Display showing discharge status and parameters

    Image: Discharge in progress.

  10. The program stops automatically when the stop discharge voltage is reached, displaying "STA:END".

Capacity Test Accuracy Reference:

Example test results for five LGABB4 18650 batteries (nominal 2600mAh) in AUTO mode:

Table showing capacity test results for multiple batteries

Table: Capacity test results.

5.7. Automatic Mode (Capacity Division and Running Cycle)

This mode performs a full charge-discharge cycle to measure capacity, with adjustable loop times.

  1. Connect a DC5V external power supply.
  2. Set the mode to "AUTO" using the "ON/OFF/Menu" and "Adjust" buttons.
  3. Display showing 'MODE:AUTO' for automatic mode

    Image: Setting the mode to AUTO.

  4. Set the desired stop discharge voltage.
  5. Set the desired number of loop times (1-9).
  6. Insert the 18650 battery into the right battery compartment (Test ①).
  7. Click "Start/Stop" to run the program.

The program will cycle through charging ("STA:CHG") and discharging ("STA:DSG"). During charging, only time is recorded. During discharging, time, capacity, and energy are recorded. If LOOP=1, the program ends after charging. If LOOP > 1, the battery will re-enter discharge mode after charging, and capacity/energy will be re-measured for each discharge cycle. The program completes when all cycles are finished, the battery is fully charged, and "STA:END" is displayed.

Display showing the automatic mode cycle process

Image: Automatic mode cycle process.

Measured Capacity Reference (AUTO Mode):

For a discharged battery, a single automatic mode cycle test yielded a capacity of 2608mAh over 9 hours, 59 minutes, and 26 seconds.

Display showing measured capacity and time in AUTO mode

Image: Measured capacity and time in AUTO mode.

Note:

  • When LOOP > 1, the capacity metering only records the discharge capacity of the last cycle, not the average capacity.
  • Capacity, energy, and time data will be reset automatically when the machine is shut down or the mode is switched.
Display showing data reset after mode switch

Image: Data reset indication.

6. Maintenance

  • Keep the device clean and dry. Avoid exposure to moisture or extreme temperatures.
  • Regularly inspect the battery compartments for any debris or corrosion. Clean with a dry, soft cloth if necessary.
  • Ensure proper ventilation during operation, especially during charging and discharging cycles, to prevent overheating of components. Consider using an external fan for prolonged use.
  • Handle the device with care to avoid physical damage to the circuit board or display.

7. Troubleshooting

  • Inaccurate Internal Resistance Reading: If the battery voltage is insufficient, the internal resistance display may show an excessively high value. Reinstall the battery for measurement after it is fully charged.
  • Unresponsive Keys (without external power): If the device's keys become unresponsive when operating solely on the working battery, replace the working battery in the left compartment with a fully charged one.
  • No Display/Power: Ensure the DC5V external power supply is correctly connected to the Type-C interface or that a charged 18650 battery is inserted into the working battery compartment.
  • Discharge Cement Resistance Overheating: This is normal during discharge. Ensure adequate ventilation and do not touch the resistance during operation.

8. User Tips

  • Always ensure batteries are inserted with correct polarity to prevent damage to the tester and battery.
  • For consistent internal resistance measurements, always test batteries when they are fully charged.
  • When performing capacity tests, especially in AUTO mode with multiple cycles, monitor the device for excessive heat and provide additional cooling if necessary.
  • Remember that the capacity and energy data are reset when the device is shut down or the mode is changed. Note down results before changing settings or powering off.

9. Warranty and Support

For any issues, technical support, or warranty inquiries, please contact the seller, "Interest Maker Store", directly through your purchase platform. Provide your order details and a clear description of the problem for efficient assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.