1. Product Overview
The Hikvision DS-KD8003-IME1(B) is an original, upgradeable video intercom module designed for robust and reliable access control and communication. It features a 2 MP HD fisheye camera with IR supplement light, noise suppression, and echo cancellation for clear audio-visual communication. This module supports various mounting options and can be integrated into complex security systems.
Key Features
- 2 MP HD video intercom function
- Access control function
- Noise suppression and echo cancellation
- Low illumination performance
- Tampering alarm supported
- Fisheye camera with IR supplement light
- Supports sub-modules' access (max. 7)
- Nametag customization
- Easy to use and extend

Image: Key features and a typical apartment system application diagram for the DS-KD8003-IME1(B) module.
2. Specifications

Image: Detailed specifications table, appearance, interfaces, and terminals diagram for the DS-KD8003-IME1(B) module.
Detailed Specifications
| Category | Parameter | Description |
|---|---|---|
| System Parameters | Processor | Embedded MCU Processor |
| Operation System | Embedded Linux operation system | |
| Operation Method | Physical button | |
| Video Parameters | Camera | Low illumination 2 MP HD IR camera |
| Video Compression Standard | H.264 | |
| Resolution | Main stream: 1920 × 1080 | |
| BLC | Supported | |
| DNR | Supported | |
| WDR | Supported | |
| Anti-flicker | 50 Hz, 60 Hz | |
| Field of View | Horizontal: 180°; Vertical: 96° | |
| Audio Parameters | Audio Input | Built-in omnidirectional microphone |
| Audio Output | Built-in loudspeaker (More than 85 dB within 20 cm) | |
| Audio compression standard | G.711 U | |
| Audio compression rate | 64 kbps | |
| Audio quality | Noise suppression and echo cancellation | |
| Light Supplement | Light supplement mode | IR supplement light |
| Network Parameters | Ethernet | 10/100 Mbps self-adaptive Ethernet |
| Network Protocol | TCP/IP, RTSP | |
| Alarm Parameters | Tampering | 1 |
| Interfaces | Module | 1 |
| Connecting | 1 | |
| Door contact | 2 | |
| Input | 2 | |
| Exit button | 2 | |
| I/O input | 4 | |
| Debug | 1 | |
| Door control | 2, breakdown voltage: 36 V | |
| Performance | Card capacity | Max. 10000 |
| User capacity | Max. 2000 | |
| Linked indoor station | Max. 500 | |
| Linked sub door station | Max. 16 | |
| General | Physical button | 1 |
| Power Supply | 12 VDC/PoE (IEEE 802.3af) | |
| Power consumption | 4 W | |
| Working temperature | -40° C to +55° C (-40° F to 131° F) | |
| Working humidity | 10% to 95% | |
| Installation | Flush mounting, surface mounting | |
| Dimension | 98 mm × 99.8 mm × 43.9 mm (3.86" × 3.93" × 1.73") | |
| Weight | 520 g (with packaging), 375 g (without packaging) |
3. Installation & Setup
Mounting Options
The DS-KD8003-IME1(B) supports both flush and surface mounting, utilizing various accessory frames. Ensure you select the correct accessory for your desired installation type.
- Flush Mounting: Use accessories like DS-KD-ACF1 (single module) or DS-KD-ACF2 (two modules).
- Surface Mounting: Use accessories like DS-KD-ACW1 (single module) or DS-KD-ACW2 (two modules).
- Rain Shield: DS-KABD8003-RS2 is a rain shield compatible with DS-KD-ACW2 (surface mount for two modules), but not with DS-KD-ACF2 (flush mount for two modules).

Image: DS-KD-ACF1 Flush Mounting Accessory for a single module.

Image: DS-KD-ACW1 Surface Mounting Accessory for a single module.

Image: DS-KD-ACF2 Flush Mounting Accessory for two modules.

Image: DS-KD-ACW2 Surface Mounting Accessory for two modules.

Image: DS-KABD8003-RS2 Rain Shield, compatible with DS-KD-ACW2.
Wiring and Connections
Refer to the 'Appearance and Interfaces' diagram in the specifications section for detailed port identification. The module supports 12 VDC or Power over Ethernet (PoE) for power. Connect to your network via the 10/100 Mbps self-adaptive Ethernet port. Ensure all connections are secure and follow local electrical codes.
4. Operation
Basic Intercom Functions
- Initiating a Call: Press the physical button on the module to initiate a call to a linked indoor station.
- Access Control: The module supports access control functions, including card capacity for up to 10,000 cards and user capacity for up to 2,000 users. If a keypad module (e.g., DS-KD-KP) is connected, access codes can also be used.
- Door Unlocking: Doors can be unlocked via the linked indoor station, client software, or the mobile application.
Sub-Module Integration
The DS-KD8003-IME1(B) can support up to 7 sub-modules, allowing for expanded functionality such as keypads (DS-KD-KP), card readers (DS-KD-M), or additional buttons. Refer to the specific sub-module manuals for their individual operation.
Video: A 360-degree view of a Hikvision intercom module, showcasing its design and various components including a camera, card reader, and keypad.
5. Maintenance
- Cleaning: Regularly clean the module's surface, especially the camera lens and physical button, with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Firmware Updates: Check the official Hikvision website periodically for firmware updates. Keeping the firmware up-to-date ensures optimal performance, security, and access to new features.
- Environmental Conditions: Ensure the module operates within its specified temperature (-40° C to +55° C) and humidity (10% to 95%) ranges to prevent damage.
6. Troubleshooting
- No Power: Verify the power supply (12 VDC or PoE) is correctly connected and functioning. Check power cables for damage.
- No Video/Audio: Ensure network cables are securely connected. Check network configuration and IP settings. Verify camera lens and microphone/speaker are clear of obstructions.
- Access Control Issues: Confirm that cards or access codes are correctly programmed and assigned to users. Check the connection to any external door control devices.
- Module Not Responding: Try restarting the module by disconnecting and reconnecting power. If the issue persists, check network connectivity and consult the official Hikvision support resources.
7. User Tips
- Network Stability: A stable network connection is crucial for reliable video and audio transmission. Ensure your network infrastructure is robust.
- Regular Testing: Periodically test the intercom's functionality, including calling, audio, video, and door unlocking, to ensure it's working correctly.
- Security Best Practices: Use strong, unique passwords for device access and regularly review access logs if available.
- Environmental Protection: If installing outdoors, ensure proper sealing and consider additional protective measures against harsh weather, even with rain shields.
8. Warranty and Support
For warranty information, please refer to the terms and conditions provided by your seller or the official Hikvision warranty policy. For technical support, product documentation, and software downloads, visit the official Hikvision support website or contact your local distributor.