1. Introduction
This manual provides essential information for the safe and effective installation, operation, and maintenance of your SHIMANO Acera/ALTUS rear derailleur. Please read this manual thoroughly before use and keep it for future reference. This product is designed for 7/8 speed mountain, road, and gravel bicycles.
2. Safety Information
Warning Symbol & Notice
WARNING:
- This product is not a toy and is not suitable for children under 16 years old without adult supervision.
- Keep all small parts (e.g., screws, pulleys) away from infants and toddlers to avoid choking hazards.
- Always wear appropriate protective gear (helmet, gloves, knee pads) when operating the bicycle with this derailleur.
- Do not use the product in traffic without proper training.
- Ensure the derailleur is correctly installed and adjusted before use. Improper installation may cause chain slippage, leading to falls or serious injury.
- Do not modify the derailleur's structure or components. Unauthorized modifications void compliance and safety guarantees.
- This product is not intended for use with children's bicycles (refer to EN 14765 for children-specific requirements).
- Keep the derailleur away from corrosive substances (acids, solvents) and extreme temperatures to prevent mechanical failure.
Additional Safety Notes:
- Regularly inspect the derailleur for wear, damage, or loose connections.
- Replace worn parts immediately using genuine Shimano accessories.
3. Product Overview
The SHIMANO Acera/ALTUS rear derailleurs are designed for reliable and smooth shifting performance on mountain, road, and gravel bikes. They are compatible with 7 and 8-speed drivetrains.
Figure 1: Comparison of SHIMANO RD-M310 (left) and RD-M360 (right) rear derailleurs.
Figure 2: SHIMANO Acera RD-M3020 rear derailleur.
Video 1: Demonstrating the movement and features of the RD-M360 and RD-M310 derailleurs.
4. Specifications
General Specifications:
- Derailleur Groupset Type: Mechanical Derailleur system
- Type: Rear Derailleur
- Material: Alloy
- Origin: Jp(origin)
- Components: Derailleurs
- High-concerned chemical: None
Model-Specific Specifications:
| Feature | RD-M3020-8 (ACERA M3000 Series) | RD-M310 (ALTUS) | RD-M360 (ACERA) |
|---|---|---|---|
| Compatible Chains | HG 8/7/6 Speed | 7S/8S | 7/8 Speed |
| Total Capacity (Tooth Change Range) | 45T | For 7/8 speed | Long Cage, up to 34T max sprocket |
| Low-position sprocket max tooth | 40T | N/A | 34T |
| Low-position sprocket min tooth | 30T | N/A | N/A |
| Max/Min Chainring Teeth Difference | 20T | N/A | N/A |
| Guide wheel tooth combination | 11T | N/A | N/A |
| Guide | SGS | N/A | SGS |
| Top Standard Spring Type | Dual Servo | N/A | N/A |
| High-position sprocket max tooth | 12T | N/A | N/A |
| High-position sprocket min tooth | 11T | N/A | N/A |
| Weight | ~299.5g | ~286.0g | ~303g |
Note: Weights are approximate and may vary. The origin might be changed due to different production batches.
Figure 3: RD-M310 weight measurement.
Figure 4: RD-M360 weight measurement.
Figure 5: RD-M3020 weight measurement.
5. Setup and Installation
Proper installation is crucial for the performance and safety of your derailleur. If you are unsure about any steps, it is highly recommended to seek assistance from a professional bicycle mechanic.
General Installation Steps:
- Mounting the Derailleur: Attach the rear derailleur to the derailleur hanger on your bicycle frame. Ensure it is securely tightened to the manufacturer's specifications.
- Chain Installation: Route the bicycle chain through the derailleur pulleys correctly.
- Cable Routing: Connect the derailleur cable to the derailleur and route it according to your bicycle's frame design. Ensure there are no kinks or excessive friction in the cable housing.
- Limit Screw Adjustment: Adjust the high (H) and low (L) limit screws to prevent the chain from overshifting off the smallest or largest cogs of the cassette.
- B-Tension Adjustment: Adjust the B-tension screw to set the proper distance between the upper derailleur pulley and the cassette cogs.
- Indexing Adjustment: Fine-tune the shifting by adjusting the cable tension using the barrel adjuster on the shifter or derailleur.
Refer to the official Shimano dealer's manual or a professional mechanic for detailed, model-specific installation instructions.
A user manual in PDF format is available for further guidance: View User Manual (PDF)
6. Operating Instructions
Your SHIMANO rear derailleur is designed for smooth and precise gear changes. Operate the shifter levers to move the chain across the cassette cogs.
- Upshifting (Harder Gear): Push the smaller shifter lever (or corresponding action) to move the chain to a smaller cog on the cassette.
- Downshifting (Easier Gear): Push the larger shifter lever (or corresponding action) to move the chain to a larger cog on the cassette.
- Smooth Shifting: Always pedal lightly when shifting gears to allow the chain to move smoothly between cogs. Avoid shifting under heavy load.
7. Maintenance
Regular maintenance will ensure the longevity and optimal performance of your derailleur.
- Inspection: Inspect the derailleur for wear, damage, or loose connections every 500km or every 3 months, whichever comes first.
- Cleaning: Keep the derailleur and pulleys clean from dirt and grime. Use a degreaser specifically designed for bicycle components.
- Lubrication: Lubricate the pivot points and pulley bearings with appropriate bicycle chain lubricant after cleaning or as needed.
- Cable and Housing: Check the shifter cable and housing for fraying, corrosion, or damage. Replace if necessary to maintain smooth shifting.
- Worn Parts: Replace worn parts immediately using genuine Shimano accessories to ensure compatibility and performance.
8. Troubleshooting
Here are some common issues and potential solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Difficulty shifting gears | Incorrect cable tension, dirty/worn cable/housing, bent derailleur hanger, worn chain/cassette. | Adjust cable tension with barrel adjuster, clean/replace cable/housing, check derailleur hanger alignment, inspect and replace drivetrain components. |
| Chain rubbing or making noise | Limit screws incorrectly set, B-tension incorrect, bent derailleur hanger. | Adjust H/L limit screws, adjust B-tension screw, check derailleur hanger alignment. |
| Chain falls off cassette | Limit screws incorrectly set, worn chain/cassette. | Adjust H/L limit screws, replace worn chain/cassette. |
If these steps do not resolve the issue, consult a professional bicycle mechanic.
9. User Tips
- Choosing the Right Model: When selecting a derailleur, consider the number of speeds (7 or 8) and the maximum cog size of your cassette to ensure compatibility. The RD-M310, RD-M360, and RD-M3020 models are designed for 7/8 speed systems.
- Professional Installation: For optimal performance and safety, especially if you are new to bicycle maintenance, consider having your derailleur installed and adjusted by a professional mechanic.
10. Frequently Asked Questions (FAQ)
- Q: What are some category words for this product?
- A: Rear Derailleur, SHIMANO, Derailleurs, 8 Speed, Bicycle Part, MTB, Cycling.
- Q: Are these derailleurs original Shimano products?
- A: The product is manufactured by Yiwu Xiayi Bicycle Parts Co., Ltd. under SHIMANO branding. Always verify authenticity with your seller if you have concerns.
- Q: Will this work for a 26-inch wheel bicycle?
- A: This product is generally suitable for bicycles with 26-inch wheels, provided it meets the other compatibility requirements (e.g., 7/8 speed, cassette size). However, note that the product is not suitable for bicycles with wheel sizes below 26" or above 29" as per usage restrictions.
11. Warranty & Support
Compliance Statement:
This product (Bicycle Part, Model: Universal Fit for Road/Gravel/MTB/E-Bike) meets the essential requirements of EU Directive 2006/42/EC (Mechanical Directive) and related harmonized standards. The EU Authorized Representative is responsible for ensuring compliance with EU market surveillance requirements. A complete copy of the DoC is available upon request from the EU Responsible Person.
Manufacturer Information:
- Name: Yiwu Xiayi Bicycle Parts Co., Ltd.
- Address: No. 8, Danchen 1st Road, Beiyuan Street, Yiwu City, Zhejiang Province
EU Responsible Person (Authorized Representative):
- Name: MJCM SARL
- Country: France
- Address: 78 avenue des Champs Elysees, Bureau 326, 75008 Paris, France
- Phone: +33-752907452
- Email: mjcm190928@gmail.com