1. Introduction
The DC 12V Fan Temperature Control Governor (Model JCF1211) is designed to automatically regulate the speed of 2-wire, 3-wire, and 4-wire DC 12V cooling fans based on ambient temperature. Utilizing PWM (Pulse Width Modulation) technology, it provides stepless speed regulation, reducing noise and optimizing cooling efficiency. This controller is suitable for various applications, including PC chassis cooling and industrial control environments.
2. Product Features
- Automatic Temperature Control: Actively detects current temperature and automatically adjusts fan speed.
- Fan Stop Function: Fan stops when the temperature drops below the set starting temperature minus 4°C.
- Gradual Speed Increase: Fan starts at low speed above the starting temperature and gradually increases speed as temperature rises, reaching full speed at the maximum set temperature.
- Wide Compatibility: Applicable to all types of 2-wire, 3-wire, and 4-wire 12V fans.
- Power Reverse Connection Protection: Prevents damage to the board if the power cord is connected incorrectly.
- Industrial-Grade Sensor: Features an industrial-grade temperature sensor for sensitive and reliable control.
- Dual Operating Modes: Supports both Fixed Temperature Mode and Adjustable Temperature Mode.
- High-Temperature Warning Output: Provides an OD signal output when temperature exceeds a preset warning threshold, useful for PLC or industrial control systems.
- Robust Design: Industrial-grade design suitable for complex industrial control and outdoor environments.
- Multi-Fan Support: Can support multiple fans simultaneously, provided their total current does not exceed 1A.
3. Specifications
| Parameter | Value |
|---|---|
| Model Number | JCF1211 |
| Input Voltage Support | 12V, 24V, 48V |
| Total Drive Current (Max) | 12A |
| PWM Output Frequency | 30Hz |
| PWM Amplitude | 5V |
| Dimensions (L x W x H) | 95mm x 50mm x 30mm |
| Mounting Holes | 2 x M3, 8.8cm hole distance |
| Temperature Probe Max Operating Temperature | 110°C |
Note: The maximum operating temperature of the temperature probe is 110°C. Exceeding this temperature may damage the probe.

4. Setup and Installation
Follow these steps to properly set up and install your JCF1211 Fan Temperature Control Governor:
- Mounting the Controller: Secure the controller using the two M3 mounting holes, which have a hole distance of 8.8cm.
- Connecting the Temperature Probe: Connect the included temperature probe to the designated port on the controller. Ensure the probe is placed in an area where accurate temperature monitoring is desired.
- Connecting Fans: The controller supports 2-wire, 3-wire, and 4-wire 12V fans. Connect your fan(s) to the fan output terminals. Ensure the total current of all connected fans does not exceed 1A.
- Connecting Power: Connect a DC 12V power supply to the power input terminals. The controller features reverse connection protection, so accidental reverse polarity will not damage the board.


5. Operating Instructions
The JCF1211 controller offers two operating modes: Fixed Temperature Mode and Adjustable Temperature Mode. These modes can be switched using the blue rotary switch/dial on the controller.
Fixed Temperature Mode (Mode F)
In this mode, the fan operation is based on predefined temperature thresholds:
- Start Temperature: Fixed at 30°C.
- Full Speed Temperature: Fixed at 50°C.
- Stop Temperature: Fan stops when the detected temperature drops to 27°C (30°C - 3°C).
Adjustable Temperature Mode (Mode A)
This mode allows you to customize the starting temperature:
- Adjustable Start Temperature: Can be set from 10°C (lowest) to 50°C (highest).
- Full Speed Temperature: Automatically set to (Start Temperature + 20°C).
- Stop Temperature: Fan stops when the detected temperature drops to (Start Temperature - 3°C).
Fan Speed Regulation:
- When the temperature is below the stop threshold, the fan remains off.
- When the temperature rises above the starting temperature, the fan begins to operate at a low speed.
- As the temperature continues to increase, the fan speed will gradually increase proportionally.
- Once the temperature reaches the full speed threshold, the fan will operate at maximum speed.
High-Temperature Warning:
The device includes a high-temperature warning output port. If the temperature exceeds a predefined warning value, the controller will output an OD signal. This feature can be integrated with PLC or industrial control systems for case temperature warnings or fan fault monitoring.
6. Troubleshooting
- Fan not starting/stopping: Verify that the temperature probe is correctly connected and placed. Check the selected operating mode (Fixed or Adjustable) and ensure the ambient temperature is within the expected range for fan activation/deactivation.
- Fan not changing speed: Ensure the fan is a 2, 3, or 4-wire 12V fan. Check all wiring connections for looseness or incorrect polarity (though the board has reverse protection, correct wiring is always best).
- Controller not powering on: Confirm the 12V DC power supply is connected correctly and providing adequate power.
- Temperature probe damage: If the temperature probe is exposed to temperatures exceeding 110°C, it may be damaged and require replacement.
7. User Tips
- Adjusting Start Temperature: If the factory default start temperature of 30°C in Fixed Mode is not suitable for your application, switch to Adjustable Mode (Mode A) using the blue rotary switch. You can then set the desired start temperature between 10°C and 50°C. For example, to set a start temperature of 40°C, adjust the dial accordingly.
- Optimizing Noise: By setting a higher start temperature, you can keep fans off for longer, reducing overall system noise during periods of low thermal load.
- Probe Placement: For best results, place the temperature probe as close as possible to the heat source you wish to monitor and cool (e.g., CPU heatsink, power supply, or inside the chassis).
8. Warranty and Support
For any issues or questions regarding the JCF1211 Fan Temperature Control Governor, please contact your retailer or the manufacturer's customer support. Keep your purchase receipt for warranty claims. Please note that warranty may be voided by improper installation, misuse, or damage caused by exceeding specified operating conditions.