GlobalGo SMA-800

Contents

SMA-800 USB Water Pump Instruction Manual

For Pet Drinking Fountains

1. Introduction

Thank you for choosing the GlobalGo SMA-800 USB Water Pump. This silent, submersible pump is designed to provide a continuous flow of fresh water for your pet's drinking fountain. Featuring a durable, anti-corrosion shaft and optimized noise reduction, it ensures a comfortable and quiet environment for your pets. This manual provides essential information for the safe and efficient use, setup, and maintenance of your SMA-800 water pump.

2. Important Safety Instructions

  • Read all instructions before using the appliance.
  • This pump is designed for indoor use with pet drinking fountains only. Do not use it for other purposes.
  • Ensure the power source is DC 5V/1A. Using an incorrect power supply may damage the pump or pose a safety risk.
  • Always unplug the pump from the power source before performing any maintenance, cleaning, or assembly.
  • Do not operate the pump dry. Ensure it is fully submerged in water before connecting power.
  • Keep the USB cable away from chewing pets.
  • Regularly inspect the pump and cable for any signs of damage. Do not use if damaged.
  • Keep out of reach of children.

3. Package Contents

Please check the box for the following items:

  • 1 x SMA-800 USB Water Pump (with integrated USB cable)
  • 4 x Filter Cotton Sponges (if 'Filter cotton' package is selected)
SMA-800 USB Water Pump with USB cable and four filter sponges
SMA-800 USB Water Pump and included filter sponges.

4. Specifications

FeatureDetail
ModelSMA-800
Power SourceUSB (DC 5V/1A)
Power Consumption1.5W
Flow Rate160 L/H
Maximum Lift50 cm
MaterialStainless Steel (shaft)
Cable Length1.8m / 5.9ft
Dimensions (Pump)4.8 cm x 4.8 cm (approx. 1.9 in x 1.9 in)
Filter Sponge DimensionsInner Diameter: 6.1 cm (2.4 in), Outer Diameter: 7.6 cm (2.99 in)
Weight (Package)0.17 kg
Smart DeviceNo
Intended UseCats (Pet Drinking Fountains)
Dimensional drawing of the SMA-800 pump and filter sponge, along with USB cable length.
Dimensions of the SMA-800 pump, filter sponge, and USB cable.
Side view of the SMA-800 pump, showing model number and specifications printed on the casing.
Model number and specifications on the pump casing.

5. Setup Instructions

Follow these steps to set up your SMA-800 USB Water Pump:

  1. Unpack the Pump: Carefully remove the pump and any accessories from the packaging.
  2. Install Filter Sponge: If your package includes filter cotton, place one filter sponge around the pump body, ensuring it covers the intake grilles.
  3. Place in Fountain: Position the pump securely at the bottom of your pet drinking fountain. Ensure the fountain is clean and ready for water.
  4. Fill Fountain with Water: Fill the pet drinking fountain with clean water, ensuring the pump is fully submerged. Do not operate the pump without water.
  5. Connect Power: Plug the USB cable into a compatible DC 5V/1A USB power adapter (not included) or a power bank.
SMA-800 USB Water Pump with USB cable, ready for connection.
The SMA-800 pump with its USB power cable.
Diagram illustrating the SMA-800 pump's compatibility with various pet fountain designs.
The SMA-800 pump is compatible with a wide range of pet drinking fountains.

6. Operation

Once the pump is set up and submerged in water, simply connect the USB cable to a power source. The pump will start operating, circulating water through your pet fountain. The SMA-800 is designed for continuous, low-noise operation, providing a constant supply of fresh water for your pet.

  • Ensure the water level in the fountain is always above the minimum water level indicator (if present on your fountain) to prevent the pump from running dry.
  • The pump operates silently, with only the gentle sound of flowing water audible, contributing to a peaceful environment.

7. Maintenance and Cleaning

Regular cleaning and maintenance are crucial for the longevity and efficient operation of your SMA-800 pump. Always unplug the pump before cleaning.

  1. Disassemble the Pump: The pump body can be easily disassembled. Gently open the filter cover and remove the filter sponge. You can then access the impeller area.
  2. SMA-800 pump with the filter cover partially open, showing internal access.
    Opening the filter cover for access.
  3. Clean Components: Rinse all parts (pump body, filter cover, impeller) under clean running water. Use a small brush (e.g., a toothbrush) to remove any debris, hair, or mineral deposits from the impeller and its housing. The pump body can be disassembled at both ends to remove any remaining debris inside.
  4. SMA-800 pump with the filter cover removed, revealing the internal impeller housing.
    Internal view of the pump with filter cover removed.
    SMA-800 pump with the filter cover and impeller housing removed, showing the impeller.
    Impeller area exposed for thorough cleaning.
  5. Replace Filter Sponge: Replace the old filter sponge with a new one (if applicable). Filter sponges should be replaced regularly, typically every 2-4 weeks, depending on usage and water quality.
  6. Close-up of a black filter cotton sponge.
    Example of a filter cotton sponge.
  7. Reassemble: Reassemble all parts of the pump, ensuring they fit snugly.
  8. Rinse Fountain: Clean the pet drinking fountain thoroughly before placing the pump back inside.

8. Troubleshooting

ProblemPossible CauseSolution
Pump not workingNo power; Impeller blocked; Not enough water.Check USB connection and power adapter. Disassemble and clean impeller. Ensure pump is fully submerged.
Reduced water flowFilter sponge clogged; Impeller blocked; Mineral buildup.Replace filter sponge. Disassemble and clean impeller and pump components. Descale with vinegar solution if mineral buildup is severe.
Pump is noisyImpeller blocked; Not enough water; Pump not seated correctly.Disassemble and clean impeller. Ensure pump is fully submerged. Re-seat the pump firmly in the fountain.
Water tastes bad/smellsFountain/pump not cleaned regularly; Stagnant water.Clean the pump and fountain thoroughly. Replace water daily. Increase cleaning frequency.

9. User Tips

  • Maintain Water Level: Always ensure the pet fountain has sufficient water to keep the pump fully submerged. Running the pump dry can cause damage and reduce its lifespan.
  • Regular Cleaning: To maintain optimal performance and quiet operation, clean the pump and replace the filter sponge regularly. The pump's design allows for easy disassembly to remove any internal debris.
  • Quiet Operation: The SMA-800 is engineered for low noise. If you notice increased noise, it's often an indication that the impeller is obstructed by pet hair or debris, or the water level is too low.
  • Power Source: Use a reliable DC 5V/1A USB power adapter or a compatible power bank for consistent performance.

10. Warranty and Support

For any questions, concerns, or technical support regarding your GlobalGo SMA-800 USB Water Pump, please contact the seller or retailer from whom you purchased the product. Please retain your proof of purchase for warranty claims.

© 2023 GlobalGo. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.