SUMRY SP-2200, SP-3200, SP-4200, SP-7000

Contents

SUMRY Hybrid Solar Inverter User Manual

Models: SP-2200, SP-3200, SP-4200, SP-7000

1. Introduction

This manual provides essential information for the installation, operation, and maintenance of your SUMRY Hybrid Solar Inverter. Please read this manual thoroughly before installation and operation to ensure proper and safe use of the inverter.

Key Features:

  • Pure sine wave output
  • Programmable supply priority for PV, battery, or grid
  • High PV input voltage range (55-450VDC)
  • Built-in MPPT solar charge controller (Max 110A for 3.6KW & 6.2KW models)
  • Compatible with lithium-ion battery
  • Support BMS communication with Lithium battery
  • Smart battery charge design to optimize battery life
  • Overload, high temperature, and inverter output short circuit protection
  • Cold start function
  • Intelligent fan speed adjustment
  • Built-in anti-dusk kit for harsh environments (optional)
  • WIFI & GPRS monitoring available for iOS and Android (optional)

Video: Overview of the SUMRY Hybrid Solar Inverter and its capabilities, including powering various household appliances.

2. Safety Information

WARNING: This inverter must work with a battery.

  • Read all instructions and cautionary markings on the unit and in this manual before operating the unit.
  • Do not disassemble the inverter. Take it to a qualified service center when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.
  • To reduce risk of electric shock, disconnect all wiring before attempting any maintenance or cleaning. Turning off the unit will not reduce this risk.
  • Only qualified personnel can install and operate this device.
  • Never charge a frozen battery.
  • Do not mount the inverter on flammable construction materials.
  • Ensure proper air circulation to dissipate heat. Allow a clearance of approx. 20 cm to the side and approx. 50 cm above and below the unit.
  • The ambient temperature should be between 0°C and 55°C for optimal operation.
  • SUITABLE FOR MOUNTING ON CONCRETE OR OTHER NON-COMBUSTIBLE SURFACE ONLY.

3. Product Overview

The SUMRY Hybrid Solar Inverter combines functions of an inverter, MPPT solar charger, and battery charger to offer uninterruptible power support with a portable size.

SUMRY Hybrid Solar Inverter front view with key features

Figure 3.1: Front view of the SUMRY Hybrid Solar Inverter highlighting key features like Max Charge Current (60A/80A), Max PV Array Power (2KW/3KW/6KW), MPPT Range (55-450VDC), and Frequency Range (50Hz/60Hz).

SUMRY Hybrid Solar Inverter with detailed feature icons

Figure 3.2: Detailed feature icons including Max PV Input (2KW/3KW/6KW), Max PV Input Voltage (450VDC), MPPT Range (55-450VDC), MPPT Controller, Battery Voltage (12/24/48 Volt), Works with Lithium battery, AC Output (1.8KW/3KW/3.8KW/6.2KW), Max Charging Current (80/110A), Monitor & Control (RS232/RS485), Pure Sine Wave Inverter, Wi-Fi Option, and BMS.

Product Overview diagram showing LCD display, indicators, and ports

Figure 3.3: Product Overview. Key components include: 1. LCD display, 2. Status indicator, 3. Charging indicator, 4. Fault indicator, 5. Function buttons, 6. Power on/off switch, 7. AC input, 8. AC output, 9. PV input, 10. Battery input, 11. RS-232 communication port, 12. Safety (Earth) ground, 13. Circuit breaker.

4. Setup and Installation

4.1 Mounting the Unit

Consider the following points before selecting where to install:

  • Do not mount the inverter on flammable construction materials.
  • Mount on a solid surface.
  • Install this inverter at eye level in order to allow the LCD display to be read at all times.
  • For proper air circulation to dissipate heat, allow a clearance of approx. 20 cm to the side and approx. 50 cm above and below the unit.
  • The ambient temperature should be between 0°C and 55°C to ensure optimal operation.
  • The recommended installation position is to be adhered to the wall vertically.
  • Be sure to keep other objects and surfaces as shown in the diagram to guarantee sufficient heat dissipation and to have enough space for removing wires.

SUITABLE FOR MOUNTING ON CONCRETE OR OTHER NON-COMBUSTIBLE SURFACE ONLY.

Mounting diagram with clearance measurements

Figure 4.1: Mounting diagram showing recommended clearances: 20cm to sides, 50cm above and below.

4.2 Battery Connection

Connect all battery packs as shown in the chart below. The 1.8KW and 3KW models support a 12VDC system.

Battery connection diagram for 12V and 24V systems

Figure 4.2: Battery connection diagram. Left: Inverter 2.2KVA/12V connected to two 12V batteries in parallel. Right: Inverter 3.2KVA/24V connected to two 12V batteries in series for 24V.

Note: This inverter must work with a battery.

4.3 System Diagram

The inverter can power loads from PV energy or the grid depending on the operation mode. While some configurations might allow operation without a battery under specific conditions, the manufacturer states that this inverter generally requires a battery for proper function.

System diagram showing operation with and without battery

Figure 4.3: System Diagram. Left: Operation with battery connected, solar power and AC power available. Right: Solar power and AC power not available, showing direct power to loads from PV or grid without battery.

5. Operation

5.1 LCD Display and Function Keys

The inverter features an LCD display and function keys for monitoring and configuration.

LCD Function Description

Figure 5.1: LCD Function Description. This diagram details the various indicators and their meanings, including PV input, AC input, input voltage/frequency, setting programs, fault codes, output voltage/frequency/load, load level, DC/AC inverter circuit, battery level, utility charger circuit, unit connected to PV panel, unit connected to mains, load supplied by utility power, unit alarm disabled, and overload.

LED Indicator Messages
LED Indicator Color Messages
AC / INV Green Solid On: Output is powered by utility in Line mode.
Flashing: Output is powered by battery or PV in battery mode.
CHG Green Solid On: Battery is fully charged.
Flashing: Battery is charging.
FAULT Red Solid On: Fault occurs in the inverter.
Flashing: Warning condition occurs in the inverter.
Function Keys Description
Function Key Description
ESC To exit setting mode
UP To go to previous selection
DOWN To go to next selection
ENTER To confirm the selection in setting mode or enter setting mode

5.2 Wi-Fi Monitoring (Optional)

WIFI & GPRS monitoring is available for iOS and Android devices. Download the SmartESS app by scanning the QR codes provided.

Wi-Fi Monitoring setup with QR codes for SmartESS app

Figure 5.2: Wi-Fi Monitoring setup. Includes images of the Wi-Fi module and QR codes for SmartESS app download (iOS and Android).

6. Maintenance

  • Regularly inspect the inverter for any signs of damage or wear.
  • Ensure all connections are secure and free from corrosion.
  • Keep the ventilation openings clear of dust and debris to maintain proper airflow and prevent overheating.
  • Clean the exterior of the inverter with a dry cloth. Do not use liquid cleaners.
  • Periodically check battery connections and ensure they are tight.
  • For models with an optional anti-dusk kit, ensure it is clean and functioning to protect against harsh environments.

7. Troubleshooting

If the FAULT indicator is solid red or flashing, a fault or warning condition has occurred. Refer to the LCD display for specific error codes and consult the full user manual for detailed troubleshooting steps.

Common Issues and Solutions:

  • No output power: Check AC input and output connections. Ensure the power on/off switch is in the 'ON' position. Verify battery connections and charge level.
  • Overload protection: Reduce the connected load. Ensure the total wattage of appliances does not exceed the inverter's rated power.
  • High temperature warning: Check for proper ventilation. Ensure the inverter is not mounted in an enclosed space without sufficient airflow. Clean any dust from the fans and vents.
  • Battery not charging: Verify PV input connections and solar panel output. Check the CHG indicator. Ensure battery voltage is within the acceptable range.
  • Inverter output short circuit: Disconnect all loads and check for short circuits in the wiring.

8. Specifications

Below are the detailed specifications for the SUMRY Hybrid Solar Inverter models:

Product Parameters Table

Figure 8.1: Product Parameters Table. This table provides detailed specifications for models SP-2200, SP-3200, SP-4200, and SP-7000, including Rated Power, MAX.PV Array Power, Surge Power, MAX.Charging Current, Battery Voltage, MPPT Range@Operating Voltage, MAX. Efficiency, Dimension, Net Weight, Communication Interface, and Operating Environment.

General Specifications
Feature Description
Output Type SINGLE
Output Frequency 50/60Hz
Output Current 4400VA/6600VA (model dependent)
Output Power 1.8kw/3kw/3.8kw/6.2kw (model dependent)
Size 405*286*98mm (varies by model)
Weight 7/8kg (varies by model)
Is Smart Device Yes
Certification CE, FCC, RoHS
Feature Off-grid
Function Works with battery, solar panels, utility

Notes on Product Parameters:

  1. Ensure the power rating is higher than the appliance you want to apply.
  2. You should purchase a larger model (at least 10% to 20% more than the maximum load).
  3. If you want to run more than one appliance at the same time, you should refer to the total wattage.
  4. To run inductive loads for a long time, you should buy a pure sine wave inverter.

9. User Tips

  • For optimal performance, ensure your battery system matches the inverter's voltage requirements (e.g., 12V for 1.8KW/3KW models, 24V for 3.8KW/6.2KW models).
  • When connecting multiple appliances, always calculate the total wattage to avoid overloading the inverter. It's recommended to have a buffer of 10-20% above your maximum expected load.
  • If you plan to use the inverter for sensitive electronics or inductive loads (like motors or refrigerators), ensure you select a pure sine wave model for stable and clean power output.
  • Regularly check the inverter's display for any fault codes or warnings and address them promptly to prevent damage.

10. Warranty and Support

This SUMRY Hybrid Solar Inverter comes with a 1-year warranty. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer directly. Ensure you have your product model number and purchase details ready.

The product is certified with CE, FCC, and RoHS standards.

© 2024 SUMRY. All rights reserved.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.