1. Introduction
The SUMRY SP Hybrid Inverter is a versatile power solution designed for off-grid solar applications. It features a pure sine wave output, MPPT solar charge controller, and is compatible with various battery types. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your inverter.
Key Features:
- Pure sine wave output for sensitive electronics.
- Programmable supply priority for PV, battery, or grid.
- Wide PV input voltage range (55-450VDC).
- Built-in Max 110A (3.6KW & 6.2KW) MPPT solar charge controller.
- Compatible with lithium-ion batteries and supports BMS communication.
- Smart battery charge design to optimize battery life.
- Comprehensive protection: Overload, high temperature, inverter output short circuit.
- Cold start function.
- Intelligent fan speed adjustment for efficient cooling.
- Optional built-in anti-dust kit for harsh environments.
- WIFI & GPRS available for iOS and Android monitoring.

Figure 1: MPPT Solar Inverter Key Features
2. Safety Information
Please read and understand all instructions and warnings before installing or operating this inverter. Failure to follow these instructions may result in electric shock, fire, or severe injury.
- Installation must be performed by qualified personnel.
- Do not mount the inverter on flammable construction materials.
- Ensure the inverter is mounted on a solid surface.
- Install this inverter at eye level to allow the LCD display to be read at all times.
- For proper air circulation and heat dissipation, allow a clearance of approximately 20 cm to the sides and 50 cm above and below the unit.
- The ambient temperature should be between 0°C and 55°C for optimal operation.
- The recommended installation position is to adhere the unit vertically to a wall.
- Keep other objects and surfaces clear as shown in diagrams to guarantee sufficient heat dissipation and space for wiring.
- SUITABLE FOR MOUNTING ON CONCRETE OR OTHER NON-COMBUSTIBLE SURFACE ONLY.

Figure 2: Mounting the Unit with Recommended Clearances
3. Product Overview
External View and Connections:

Figure 3: Product Display - Front and Rear Views

Figure 4: Product Overview with Labeled Components
LCD Display and Function Keys:
The inverter features an LCD display and several function keys for monitoring and configuration.

Figure 5: LCD Function Description
| LED Indicator | Messages |
|---|---|
| AC / INV (Green) | Solid On: Output is powered by utility in Line mode. Flashing: Output is powered by battery or PV in battery mode. |
| CHG (Green) | Solid On: Battery is fully charged. Flashing: Battery is charging. |
| FAULT (Red) | Solid On: Fault occurs in the inverter. Flashing: Warning condition occurs in the inverter. |
| Function Key | Description |
|---|---|
| ESC | To exit setting mode |
| UP | To go to previous selection |
| DOWN | To go to next selection |
| ENTER | To confirm the selection in setting mode or enter setting mode |
4. Specifications

Figure 6: Product Parameters Table
General Specifications:
- Model Numbers: SP-4200/SP-7000
- Output Power: 500 - 1000W (depending on model)
- Size: 423*290*100mm (for SP-4200)
- Output Type: SINGLE
- Weight: 8.5kg (for SP-4200/SP-7000)
- Output Frequency: 50/60Hz
- Smart Device: Yes
- Certification: CE, FCC, RoHS
5. Installation & Setup
Solar Panel Connection:
Connecting solar panels in series will increase the voltage. Ensure the total PV voltage range is between 50-450VDC. Verify that the total power of your solar panels does not exceed the maximum power rating of the inverter (Loads < Inverter power).

Figure 7: Solar Panel Series Connection Example
PV Cable Dimensions: 6-8 mm²
Battery Connection:
Connect all battery packs according to the appropriate system voltage (12VDC or 24VDC) as shown in the diagrams below. This inverter must work with a battery. Ensure the battery is connected before connecting solar panels.

Figure 8: Battery Connection Diagrams (12VDC and 24VDC Systems)
6. Operation
System Diagram:
The inverter can operate in various configurations, mixing solar, battery, and utility power. Below are typical operation scenarios:

Figure 9: System Operation Diagram
Powering Devices:
The inverter provides pure sine wave AC output suitable for various household appliances. Ensure the total load does not exceed the inverter's rated power.
Video 1: Demonstration of the inverter powering various household appliances like a fan, kettle, smartphone, and laptop.
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your SUMRY SP Hybrid Inverter.
- Cleaning: Periodically clean the exterior of the inverter, especially the ventilation openings, to prevent dust buildup. Use a dry, soft cloth.
- Ventilation: Ensure that the inverter's cooling fans and vents are unobstructed. The inverter features strong heat dissipation capabilities, but proper airflow is crucial.
- Connections: Regularly check all electrical connections (PV, battery, AC input/output) for tightness and signs of corrosion.
- Environment: Maintain the operating environment within the specified temperature and humidity ranges to prevent damage.

Figure 10: Strong Heat Dissipation Design
8. Troubleshooting
The inverter is equipped with various protection features. If a fault or warning condition occurs, the red FAULT LED will illuminate or flash, and the LCD display may show a corresponding code (refer to Figure 5 for LCD icon meanings).
Common Protections:

Figure 11: Inverter Protection Features
If a fault occurs, first check the LCD display for any error codes or flashing indicators. Consult the detailed LCD Function Description (Figure 5) to understand the meaning of the displayed icons. Ensure all connections are secure and within specified parameters. If the issue persists, contact customer support.
9. User Tips
- Output Voltage: The inverter's output is typically 220VAC. If you require 110VAC output, please ensure you select the correct model or use an appropriate step-down transformer if your model only supports 220VAC.
- Battery Compatibility: This inverter is compatible with both LiFePO4 (lithium-ion) and lead-acid batteries. Ensure proper battery voltage (12V, 24V, or 48V) matches the inverter model.
- BMS Communication: The inverter supports BMS communication with lithium batteries via RS232. If your battery uses RS485, you may need an adapter or a battery with RS232 compatibility.
- Running Without Battery: This inverter is designed to work with a battery. It requires a battery connection for proper operation, even when solar and AC power are available.
- Sizing Appliances: When connecting appliances, ensure the inverter's rated power is higher than the appliance's requirement. For multiple appliances, refer to the total wattage. For inductive loads, a pure sine wave inverter like this one is recommended.
10. Warranty & Support
Your SUMRY SP Hybrid Inverter comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use conditions.
For technical support, troubleshooting assistance, or warranty claims, please contact the seller or SUMRY customer service. All questions will typically be answered within 24 hours.