1. Introduction
The ESCAM QF380 is a versatile 4G solar-powered trial camera designed for outdoor monitoring, including hunting, wildlife observation, and camping security. It features 4MP high-definition video, 4G connectivity for remote viewing, PIR motion detection, two-way audio, and infrared night vision, all powered by a detachable solar panel and a high-capacity battery. Its IP66 waterproof rating ensures reliable performance in various weather conditions.
2. What's in the Box
Please check the package contents to ensure all items are present:
- Camera x 1
- Screws Package x 1
- Micro USB Charging Cable x 1
- Quick Start Guide x 1
- Solar Panel x 1
- Camera Strap x 1
- Solar Power Support x 2
3. Setup Guide
3.1 Component Identification
Familiarize yourself with the camera's parts:
- IR LED: Infrared lights for night vision.
- Lens: Main camera lens.
- Microphone: For audio input.
- PIR Sensor: Passive Infrared sensor for motion detection.
- Speaker: For two-way audio output.
- TF Card Slot: For inserting a MicroSD card (up to 128GB).
- SIM Card Slot: For inserting a 4G SIM card.
- Reset Button: To reset the device to factory settings.
- Battery 18650: Rechargeable batteries (7800mAh total capacity).
- Antenna: For 4G signal reception.
- Connect Port For Solar Panel: Port to connect the solar panel.
- USB Cable: Micro USB for charging and connection.
3.2 Initial Charging
Before first use, fully charge the camera's internal 7800mAh polymer lithium battery using the provided Micro USB charging cable. Connect the cable to the camera's USB port and a standard USB power adapter (not included).
3.3 SIM Card and TF Card Installation
- Open the camera's battery compartment/cover.
- Insert a compatible 4G SIM card into the SIM card slot. Ensure it is correctly oriented.
- Insert a MicroSD (TF) card (up to 128GB) into the TF card slot for local storage.
- Close the compartment securely to maintain the IP66 waterproof rating.
3.4 Solar Panel Connection and Mounting
The 4W detachable solar panel provides sustainable and uninterruptible power. Connect the solar panel to the camera using the designated port. Mount the solar panel in a location that receives maximum direct sunlight throughout the day. Use the provided solar power support and screws for secure installation. The camera can be mounted using the camera strap or universal bracket.
4. Operating Instructions
4.1 Powering On/Off
Locate the power button (usually inside the battery compartment or on the side) and press it to turn the camera on. The camera will initiate its startup sequence. To power off, press and hold the power button.
4.2 App Installation and 4G Remote Viewing
- Download the dedicated mobile application (refer to the Quick Start Guide for app name and QR code).
- Register an account and add your camera by scanning the QR code on the device or manually entering its ID.
- Once connected, you can monitor the camera remotely via 4G connectivity from anywhere, without needing Wi-Fi.
4.3 High-Definition Video Recording
The camera captures high-definition images and videos at 4 Megapixels (2560*1440 resolution). Recordings are triggered by motion detection and saved to the inserted TF card or uploaded to cloud storage.
4.4 PIR Motion Detection
The Passive Infrared (PIR) motion sensor detects movement within a 0-12 meter range and a 95° detection angle. Upon detection, the camera will record an alarm and save the footage. You will receive push notifications on your mobile app.
4.5 Infrared Night Vision
Equipped with 8 infrared lamps, the camera provides clear night vision up to 25 meters, allowing for effective monitoring in low-light or complete darkness.
4.6 Two-Way Audio
The built-in microphone and high-quality speaker enable two-way communication. You can listen to the environment around the camera and speak through your mobile phone app.
4.7 Storage Options
The camera supports local storage via a MicroSD (TF) card up to 128GB. Additionally, it offers cloud storage with a free 30-day trial. After the trial, continued cloud service requires a subscription.
4.8 Weather Resistance
With an IP66 waterproof rating, the camera is designed for all-weather outdoor use, protecting it from dust and strong jets of water.
4.9 Product Showcase Video
For a visual guide on the product and its features, please watch the official video:
5. Maintenance
- Cleaning: Gently wipe the camera lens and solar panel with a soft, damp cloth to remove dust and dirt. Avoid abrasive cleaners.
- Battery Care: Ensure the solar panel is regularly exposed to sunlight for optimal charging. If storing the camera for an extended period, ensure the battery is partially charged (around 50%) and recharge it every few months to prevent deep discharge.
- Firmware Updates: Check the mobile application periodically for any available firmware updates to ensure optimal performance and security.
- Environmental Protection: While IP66 rated, avoid submerging the camera in water or exposing it to extreme temperatures beyond its operating range.
6. Troubleshooting
- Camera not powering on: Ensure the battery is charged. Check the power button.
- No 4G signal/Remote viewing not working: Verify the SIM card is correctly inserted and activated with a data plan. Check 4G network coverage in the camera's location. Ensure the antenna is securely attached.
- No recordings/Cloud storage issues: Check if the TF card is inserted correctly and has sufficient space. If using cloud storage, ensure your subscription is active after the free trial.
- PIR motion detection not triggering: Ensure the PIR sensor is clean and unobstructed. Adjust the camera's position or sensitivity settings in the app.
- Poor night vision: Ensure the IR LEDs are not obstructed and are clean. Check for any external light sources that might interfere.
- Two-way audio not working: Check microphone and speaker settings in the app. Ensure network connectivity is stable.
- Camera not working in a specific region (e.g., Mexico): The camera supports 4G connectivity. Ensure the 4G bands supported by the camera are compatible with the local network provider in your region. Consult your local network provider for band compatibility.
7. Specifications
| Feature | Detail |
|---|---|
| Model | QF380 |
| Connectivity | 4G |
| Sensor | CMOS |
| Resolution | 4MP (2560*1440) |
| Solar Panel | 4W Detachable |
| Battery | 7800mAh Polymer Lithium (18650 type) |
| PIR Detection Distance | 0-12 meters |
| PIR Detection Angle | 95° |
| Night Vision Range | Up to 25 meters (8 IR LEDs) |
| Audio | Two-Way Audio (Built-in Mic & Speaker) |
| Storage | Max 128GB TF Card, Cloud Storage (30-day free trial) |
| Waterproof Rating | IP66 |
| Supported Mobile Systems | iOS, Android, Symbian, Windows Mobile |
| Supported Operating Systems | Windows 10, macOS, Windows 8, Windows 7, Windows 98, Windows XP, Windows Vista |
| Dimensions (Camera) | 120mm (H) x 95mm (W) x 60mm (D) |
| Height with Antenna | 200mm |
| Box Weight | 0.92 kg |
| Certification | CE |
8. User Tips
- Network Compatibility: Before purchasing or deploying, verify that the camera's 4G bands are compatible with your local cellular network provider to ensure proper remote viewing functionality.
- Optimal Solar Charging: Position the solar panel to receive maximum direct sunlight throughout the day, especially during peak hours, to maintain continuous power to the camera.
- Secure Mounting: When installing, ensure the camera and solar panel are securely mounted to prevent accidental falls or theft, especially in outdoor environments.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact details provided by your retailer or the manufacturer's official website. Keep your purchase receipt as proof of purchase for any warranty claims.
